| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200229132551.GA5111@afzalpc>
Date: Sat, 29 Feb 2020 18:55:51 +0530
From: afzal mohammed <afzal.mohd.ma@...il.com>
To: Finn Thain <fthain@...egraphics.com.au>,
Greg Ungerer <gerg@...ux-m68k.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linux-m68k@...ts.linux-m68k.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] m68k: Replace setup_irq() by request_irq()
Huh, i messed it up in a hurry, i forgot to make modifications in 2
places, i will send v4 after handling those 2 cases as well.
Regards
afzal
On Sat, Feb 29, 2020 at 06:26:50PM +0530, afzal mohammed wrote:
> request_irq() is preferred over setup_irq(). Invocations of setup_irq()
> occur after memory allocators are ready.
>
> Per tglx[1], setup_irq() existed in olden days when allocators were not
> ready by the time early interrupts were initialized.
>
> Hence replace setup_irq() by request_irq().
>
> [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
>
> Signed-off-by: afzal mohammed <afzal.mohd.ma@...il.com>
> ---
>
> Hi Greg,
>
> i have removed your Tested-by due to the modifications, if possible,
> please test & let me know.
>
> Regards
> afzal
>
> v3:
> * Instead of tree wide series, arch specific patch (per tglx)
> * Strip irrelevant portions & more tweaking in commit message
> * Remove name indirection in pr_err string, print irq # and
> symbolic error name in case of error
> * s/pr_err/pr_debug
> v2:
> * Replace pr_err("request_irq() on %s failed" by
> pr_err("%s: request_irq() failed"
> * Commit message massage
> * remove now irrelevant comment lines at 3 places
>
> arch/m68k/68000/timers.c | 16 +++++++---------
> arch/m68k/coldfire/pit.c | 16 +++++++---------
> arch/m68k/coldfire/sltimers.c | 24 ++++++++++--------------
> arch/m68k/coldfire/timers.c | 26 ++++++++++----------------
> 4 files changed, 34 insertions(+), 48 deletions(-)
>
> diff --git a/arch/m68k/68000/timers.c b/arch/m68k/68000/timers.c
> index 71ddb4c98726..07a389a287e4 100644
> --- a/arch/m68k/68000/timers.c
> +++ b/arch/m68k/68000/timers.c
> @@ -68,14 +68,6 @@ static irqreturn_t hw_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction m68328_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = hw_tick,
> -};
> -
> -/***************************************************************************/
> -
> static u64 m68328_read_clk(struct clocksource *cs)
> {
> unsigned long flags;
> @@ -102,11 +94,17 @@ static struct clocksource m68328_clk = {
>
> void hw_timer_init(irq_handler_t handler)
> {
> + int ret;
> +
> /* disable timer 1 */
> TCTL = 0;
>
> /* set ISR */
> - setup_irq(TMR_IRQ_NUM, &m68328_timer_irq);
> + ret = request_irq(TMR_IRQ_NUM, hw_tick, IRQF_TIMER, "timer", NULL);
> + if (ret) {
> + pr_debug("Failed to request irq %d (timer): %pe\n", TMR_IRQ_NUM,
> + ERR_PTR(ret));
> + }
>
> /* Restart mode, Enable int, Set clock source */
> TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
> diff --git a/arch/m68k/coldfire/pit.c b/arch/m68k/coldfire/pit.c
> index eb6f16b0e2e6..482678cf4819 100644
> --- a/arch/m68k/coldfire/pit.c
> +++ b/arch/m68k/coldfire/pit.c
> @@ -111,14 +111,6 @@ static irqreturn_t pit_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction pit_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = pit_tick,
> -};
> -
> -/***************************************************************************/
> -
> static u64 pit_read_clk(struct clocksource *cs)
> {
> unsigned long flags;
> @@ -146,6 +138,8 @@ static struct clocksource pit_clk = {
>
> void hw_timer_init(irq_handler_t handler)
> {
> + int ret;
> +
> cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
> cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
> cf_pit_clockevent.max_delta_ns =
> @@ -156,7 +150,11 @@ void hw_timer_init(irq_handler_t handler)
> cf_pit_clockevent.min_delta_ticks = 0x3f;
> clockevents_register_device(&cf_pit_clockevent);
>
> - setup_irq(MCF_IRQ_PIT1, &pit_irq);
> + ret = request_irq(MCF_IRQ_PIT1, pit_tick, IRQF_TIMER, "timer", NULL);
> + if (ret) {
> + pr_debug("Failed to request irq %d (timer): %pe\n",
> + MCF_IRQ_PIT1, ERR_PTR(ret));
> + }
>
> clocksource_register_hz(&pit_clk, FREQ);
> }
> diff --git a/arch/m68k/coldfire/sltimers.c b/arch/m68k/coldfire/sltimers.c
> index 1b11e7bacab3..087c68d2d909 100644
> --- a/arch/m68k/coldfire/sltimers.c
> +++ b/arch/m68k/coldfire/sltimers.c
> @@ -50,18 +50,19 @@ irqreturn_t mcfslt_profile_tick(int irq, void *dummy)
> return IRQ_HANDLED;
> }
>
> -static struct irqaction mcfslt_profile_irq = {
> - .name = "profile timer",
> - .flags = IRQF_TIMER,
> - .handler = mcfslt_profile_tick,
> -};
> -
> void mcfslt_profile_init(void)
> {
> + int ret;
> +
> printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
> PROFILEHZ);
>
> - setup_irq(MCF_IRQ_PROFILER, &mcfslt_profile_irq);
> + ret = request_irq(MCF_IRQ_PROFILER, mcfslt_profile_tick, IRQF_TIMER,
> + "profile timer", NULL);
> + if (ret) {
> + pr_debug("Failed to request irq %d (profile timer): %pe\n",
> + MCF_IRQ_PROFILER, ERR_PTR(ret));
> + }
>
> /* Set up TIMER 2 as high speed profile clock */
> __raw_writel(MCF_BUSCLK / PROFILEHZ - 1, PA(MCFSLT_STCNT));
> @@ -92,12 +93,6 @@ static irqreturn_t mcfslt_tick(int irq, void *dummy)
> return timer_interrupt(irq, dummy);
> }
>
> -static struct irqaction mcfslt_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = mcfslt_tick,
> -};
> -
> static u64 mcfslt_read_clk(struct clocksource *cs)
> {
> unsigned long flags;
> @@ -140,7 +135,8 @@ void hw_timer_init(irq_handler_t handler)
> mcfslt_cnt = mcfslt_cycles_per_jiffy;
>
> timer_interrupt = handler;
> - setup_irq(MCF_IRQ_TIMER, &mcfslt_timer_irq);
> + if (request_irq(MCF_IRQ_TIMER, mcfslt_tick, IRQF_TIMER, "timer", NULL))
> + pr_err("%s: request_irq() failed\n", "timer");
>
> clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
>
> diff --git a/arch/m68k/coldfire/timers.c b/arch/m68k/coldfire/timers.c
> index 227aa5d13709..eb442a0e3b50 100644
> --- a/arch/m68k/coldfire/timers.c
> +++ b/arch/m68k/coldfire/timers.c
> @@ -82,14 +82,6 @@ static irqreturn_t mcftmr_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction mcftmr_timer_irq = {
> - .name = "timer",
> - .flags = IRQF_TIMER,
> - .handler = mcftmr_tick,
> -};
> -
> -/***************************************************************************/
> -
> static u64 mcftmr_read_clk(struct clocksource *cs)
> {
> unsigned long flags;
> @@ -118,6 +110,8 @@ static struct clocksource mcftmr_clk = {
>
> void hw_timer_init(irq_handler_t handler)
> {
> + int r;
> +
> __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
> mcftmr_cycles_per_jiffy = FREQ / HZ;
> /*
> @@ -134,7 +128,11 @@ void hw_timer_init(irq_handler_t handler)
>
> timer_interrupt = handler;
> init_timer_irq();
> - setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
> + r = request_irq(MCF_IRQ_TIMER, mcftmr_tick, IRQF_TIMER, "timer", NULL);
> + if (r) {
> + pr_debug("Failed to request irq %d (timer): %pe\n",
> + MCF_IRQ_TIMER, ERR_PTR(r));
> + }
>
> #ifdef CONFIG_HIGHPROFILE
> coldfire_profile_init();
> @@ -170,12 +168,6 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy)
>
> /***************************************************************************/
>
> -static struct irqaction coldfire_profile_irq = {
> - .name = "profile timer",
> - .flags = IRQF_TIMER,
> - .handler = coldfire_profile_tick,
> -};
> -
> void coldfire_profile_init(void)
> {
> printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
> @@ -188,7 +180,9 @@ void coldfire_profile_init(void)
> __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
> MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
>
> - setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
> + if (request_irq(MCF_IRQ_PROFILER, coldfire_profile_tick, IRQF_TIMER,
> + "profile timer", NULL))
> + pr_err("%s: request_irq() failed\n", "profile timer");
> }
>
> /***************************************************************************/
> --
> 2.25.1
Powered by blists - more mailing lists