linux-kernel - Re: [RFC v2 2/8] dt-bindings: display: add ingenic-jz4780-hdmi DT Schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1583176788.3.3@crapouillou.net>
Date:   Mon, 02 Mar 2020 16:19:47 -0300
From:   Paul Cercueil <paul@...pouillou.net>
To:     "H. Nikolaus Schaller" <hns@...delico.com>
Cc:     Paul Boddie <paul@...die.org.uk>, David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Paul Burton <paulburton@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Andi Kleen <ak@...ux.intel.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        "Eric W. Biederman" <ebiederm@...ssion.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
        linux-gpio@...r.kernel.org, letux-kernel@...nphoenux.org,
        kernel@...a-handheld.com, Sam Ravnborg <sam@...nborg.org>,
        Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>,
        Rob Herring <robh@...nel.org>
Subject: Re: [RFC v2 2/8] dt-bindings: display: add ingenic-jz4780-hdmi DT
 Schema

Hi Nikolaus,


Le ven., févr. 28, 2020 at 19:19, H. Nikolaus Schaller 
<hns@...delico.com> a écrit :
> From: Sam Ravnborg <sam@...nborg.org>
> 
> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
> Based on .txt binding from Zubair Lutfullah Kakakhel
> 
> Signed-off-by: Sam Ravnborg <sam@...nborg.org>
> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
> Cc: H. Nikolaus Schaller <hns@...delico.com>
> Cc: Rob Herring <robh@...nel.org>
> Cc: devicetree@...r.kernel.org
> ---
>  .../bindings/display/ingenic-jz4780-hdmi.yaml | 83 
> +++++++++++++++++++
>  1 file changed, 83 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml 
> b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> new file mode 100644
> index 000000000000..9b71c427bd69
> --- /dev/null
> +++ 
> b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/ingenic-jz4780-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Ingenic JZ4780 HDMI Transmitter
> +
> +maintainers:
> +  - Zubair Lutfullah Kakakhel <Zubair.Kakakhel@...tec.com>
> +  - H. Nikolaus Schaller <hns@...delico.com>

Did Zubair write this glue driver? He's been MIA for a while, doesn't 
work at ImgTec anymore, and this email doesn't work.

> +
> +description: |
> +  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys 
> DesignWare HDMI 1.4
> +  TX controller IP with accompanying PHY IP.
> +
> +allOf:
> +  - $ref: panel/panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: ingenic,jz4780-hdmi
> +
> +  reg:
> +    maxItems: 1
> +    description: the address & size of the LCD controller registers

Remove the description here,

> +
> +  reg-io-width:
> +    const: 4
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Specifies the interrupt provided by parent

and here.

The rule is that if there is only one "reg", "interrupts" or "clocks" 
entry then a description is not needed as it's pretty obvious what it's 
for.

> +
> +  clocks:
> +    maxItems: 2
> +    description: Clock specifiers for isrf and iahb clocks

You need two 'description:' like this:

clocks:
  items:
    - description: ISRF clock
    - description: IAHB clock

Cheers,
-Paul

> +
> +  clock-names:
> +    items:
> +      - const: isfr
> +      - const: iahb
> +
> +  ddc-i2c-bus: true
> +  ports: true
> +
> +required:
> +    - compatible
> +    - clocks
> +    - clock-names
> +    - ports
> +    - reg-io-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/jz4780-cgu.h>
> +
> +    hdmi: hdmi@...80000 {
> +        compatible = "ingenic,jz4780-hdmi";
> +        reg = <0x10180000 0x8000>;
> +        reg-io-width = <4>;
> +        ddc-i2c-bus = <&i2c4>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <3>;
> +        clocks = <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_AHB0>;
> +        clock-names = "isfr", "iahb";
> +
> +        ports {
> +            hdmi_in: port {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                hdmi_in_lcd: endpoint@0 {
> +                    reg = <0>;
> +                    remote-endpoint = <&jz4780_out_hdmi>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> --
> 2.23.0
>