| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200302001958.11105-4-olteanv@gmail.com>
Date: Mon, 2 Mar 2020 02:19:55 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: broonie@...nel.org
Cc: linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/6] spi: spi-fsl-dspi: Parameterize the FIFO size and DMA buffer size
From: Vladimir Oltean <vladimir.oltean@....com>
Get rid of the ifdef for Coldfire and make these hardware
characteristics part of dspi->devtype_data.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/spi/spi-fsl-dspi.c | 48 ++++++++++++++++++++++----------------
1 file changed, 28 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 021c658886d4..55ccb3d0f683 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -20,13 +20,6 @@
#define DRIVER_NAME "fsl-dspi"
-#ifdef CONFIG_M5441x
-#define DSPI_FIFO_SIZE 16
-#else
-#define DSPI_FIFO_SIZE 4
-#endif
-#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024)
-
#define SPI_MCR 0x00
#define SPI_MCR_MASTER BIT(31)
#define SPI_MCR_PCSIS (0x3F << 16)
@@ -131,6 +124,8 @@ struct fsl_dspi_devtype_data {
u8 max_clock_factor;
bool ptp_sts_supported;
bool xspi_mode;
+ int fifo_size;
+ int dma_bufsize;
};
enum {
@@ -149,54 +144,64 @@ static const struct fsl_dspi_devtype_data devtype_data[] = {
[VF610] = {
.trans_mode = DSPI_DMA_MODE,
.max_clock_factor = 2,
+ .dma_bufsize = 4096,
+ .fifo_size = 4,
},
[LS1021A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
.xspi_mode = true,
+ .fifo_size = 4,
},
[LS1012A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
.xspi_mode = true,
+ .fifo_size = 16,
},
[LS1043A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
.xspi_mode = true,
+ .fifo_size = 16,
},
[LS1046A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
.xspi_mode = true,
+ .fifo_size = 16,
},
[LS2080A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
+ .fifo_size = 4,
},
[LS2085A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
+ .fifo_size = 4,
},
[LX2160A] = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
+ .fifo_size = 4,
},
[MCF5441X] = {
.trans_mode = DSPI_EOQ_MODE,
.max_clock_factor = 8,
+ .fifo_size = 16,
},
};
struct fsl_dspi_dma {
- /* Length of transfer in words of DSPI_FIFO_SIZE */
+ /* Length of transfer in words of dspi->fifo_size */
u32 curr_xfer_len;
u32 *tx_dma_buf;
@@ -397,7 +402,8 @@ static int dspi_dma_xfer(struct fsl_dspi *dspi)
int ret = 0;
curr_remaining_bytes = dspi->len;
- bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
+ bytes_per_buffer = dspi->devtype_data->dma_bufsize /
+ dspi->devtype_data->fifo_size;
while (curr_remaining_bytes) {
/* Check if current transfer fits the DMA buffer */
dma->curr_xfer_len = curr_remaining_bytes
@@ -449,14 +455,14 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
goto err_tx_channel;
}
- dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ dma->tx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize,
&dma->tx_dma_phys, GFP_KERNEL);
if (!dma->tx_dma_buf) {
ret = -ENOMEM;
goto err_tx_dma_buf;
}
- dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
+ dma->rx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize,
&dma->rx_dma_phys, GFP_KERNEL);
if (!dma->rx_dma_buf) {
ret = -ENOMEM;
@@ -493,11 +499,11 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
return 0;
err_slave_config:
- dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
- dma->rx_dma_buf, dma->rx_dma_phys);
+ dma_free_coherent(dev, dspi->devtype_data->dma_bufsize,
+ dma->rx_dma_buf, dma->rx_dma_phys);
err_rx_dma_buf:
- dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
- dma->tx_dma_buf, dma->tx_dma_phys);
+ dma_free_coherent(dev, dspi->devtype_data->dma_bufsize,
+ dma->tx_dma_buf, dma->tx_dma_phys);
err_tx_dma_buf:
dma_release_channel(dma->chan_tx);
err_tx_channel:
@@ -519,13 +525,15 @@ static void dspi_release_dma(struct fsl_dspi *dspi)
if (dma->chan_tx) {
dma_unmap_single(dev, dma->tx_dma_phys,
- DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
+ dspi->devtype_data->dma_bufsize,
+ DMA_TO_DEVICE);
dma_release_channel(dma->chan_tx);
}
if (dma->chan_rx) {
dma_unmap_single(dev, dma->rx_dma_phys,
- DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
+ dspi->devtype_data->dma_bufsize,
+ DMA_FROM_DEVICE);
dma_release_channel(dma->chan_rx);
}
}
@@ -657,7 +665,7 @@ static void dspi_tcfq_read(struct fsl_dspi *dspi)
static void dspi_eoq_write(struct fsl_dspi *dspi)
{
- int fifo_size = DSPI_FIFO_SIZE;
+ int fifo_size = dspi->devtype_data->fifo_size;
u16 xfer_cmd = dspi->tx_cmd;
/* Fill TX FIFO with as many transfers as possible */
@@ -667,7 +675,7 @@ static void dspi_eoq_write(struct fsl_dspi *dspi)
if (dspi->len == dspi->bytes_per_word || fifo_size == 0)
dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
/* Clear transfer count for first transfer in FIFO */
- if (fifo_size == (DSPI_FIFO_SIZE - 1))
+ if (fifo_size == (dspi->devtype_data->fifo_size - 1))
dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT;
/* Write combined TX FIFO and CMD FIFO entry */
fifo_write(dspi);
@@ -676,7 +684,7 @@ static void dspi_eoq_write(struct fsl_dspi *dspi)
static void dspi_eoq_read(struct fsl_dspi *dspi)
{
- int fifo_size = DSPI_FIFO_SIZE;
+ int fifo_size = dspi->devtype_data->fifo_size;
/* Read one FIFO entry and push to rx buffer */
while ((dspi->rx < dspi->rx_end) && fifo_size--)
--
2.17.1
Powered by blists - more mailing lists