[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200304194729.27979-2-sibis@codeaurora.org>
Date: Thu, 5 Mar 2020 01:17:27 +0530
From: Sibi Sankar <sibis@...eaurora.org>
To: bjorn.andersson@...aro.org, mathieu.poirier@...aro.org,
jeffrey.l.hugo@...il.com, luca@...tu.xyz
Cc: agross@...nel.org, ohad@...ery.com, linux-arm-msm@...r.kernel.org,
linux-remoteproc@...r.kernel.org, linux-kernel@...r.kernel.org,
stable@...r.kernel.org, Sibi Sankar <sibis@...eaurora.org>
Subject: [PATCH v4 1/3] remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown
From: Bjorn Andersson <bjorn.andersson@...aro.org>
Trying to reclaim mpss memory while the mba is not running causes the
system to crash on devices with security fuses blown, so leave it
assigned to the remote on shutdown and recover it on a subsequent boot.
Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch")
Cc: stable@...r.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Signed-off-by: Sibi Sankar <sibis@...eaurora.org>
---
V4:
* Add required comments to mpss_load [Mathieu]
* Reassign mpss to q6 after coredump collection
drivers/remoteproc/qcom_q6v5_mss.c | 35 ++++++++++++++++++++----------
1 file changed, 24 insertions(+), 11 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index a1cc9cbe038f1..9fed1b1c203d3 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1001,11 +1001,6 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
}
- ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
- false, qproc->mpss_phys,
- qproc->mpss_size);
- WARN_ON(ret);
-
q6v5_reset_assert(qproc);
q6v5_clk_disable(qproc->dev, qproc->reset_clks,
@@ -1095,6 +1090,14 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
}
+ /**
+ * In case of a modem subsystem restart on secure devices, the modem
+ * memory can be reclaimed only after MBA is loaded. For modem cold
+ * boot this will be a nop
+ */
+ q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
+ qproc->mpss_phys, qproc->mpss_size);
+
mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
qproc->mpss_reloc = mpss_reloc;
/* Load firmware segments */
@@ -1184,8 +1187,16 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
void *ptr = rproc_da_to_va(rproc, segment->da, segment->size);
/* Unlock mba before copying segments */
- if (!qproc->dump_mba_loaded)
+ if (!qproc->dump_mba_loaded) {
ret = q6v5_mba_load(qproc);
+ if (!ret) {
+ /* Reset ownership back to Linux to copy segments */
+ ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
+ false,
+ qproc->mpss_phys,
+ qproc->mpss_size);
+ }
+ }
if (!ptr || ret)
memset(dest, 0xff, segment->size);
@@ -1196,8 +1207,14 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
/* Reclaim mba after copying segments */
if (qproc->dump_segment_mask == qproc->dump_complete_mask) {
- if (qproc->dump_mba_loaded)
+ if (qproc->dump_mba_loaded) {
+ /* Try to reset ownership back to Q6 */
+ q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
+ true,
+ qproc->mpss_phys,
+ qproc->mpss_size);
q6v5_mba_reclaim(qproc);
+ }
}
}
@@ -1237,10 +1254,6 @@ static int q6v5_start(struct rproc *rproc)
return 0;
reclaim_mpss:
- xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
- false, qproc->mpss_phys,
- qproc->mpss_size);
- WARN_ON(xfermemop_ret);
q6v5_mba_reclaim(qproc);
return ret;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists