Message-ID: <1583290655-7858-3-git-send-email-light.hsieh@mediatek.com>
Date:   Wed, 4 Mar 2020 10:57:34 +0800
From:   <light.hsieh@...iatek.com>
To:     <ulf.hansson@...aro.org>
CC:     <linux-mediatek@...ts.infradead.org>, <axboe@...nel.dk>,
        <linux-block@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <kuohong.wang@...iatek.com>, <stanley.chu@...iatek.com>,
        Light Hsieh <light.hsieh@...iatek.com>
Subject: [PATCH v1 2/3] mmc: check write-protection status during BLKROSET ioctl

From: Light Hsieh <light.hsieh@...iatek.com>

Since MMC layer does not implement BLKROSET ioctl, BLKROSET ioctl that
tries to clear ro attribute of an mmcblk device will get -EINVAL from
__blkdev_driver_ioctl(). blkdev_roset() regard -EINVAL as "unrecogized
ioctl" and then clear the ro attribute un-conditionally.
However, when eMMC write-protection (power-on, temporarily write, or
permanent) is enabled in some area, this un-conditional clear of ro
will lead to issue. From user's view, eMMC device is writable since ro
is not set. But write operation sent to eMMC will get write-protection
error. Since most write are asynchronus buffered write, such
write-protection error won't be delivered to user who send the write
operation.

This patch implement BLKROSET in MMC layer.
1. For SD device, 0 is retured.
2. For setting ro to eMMC area, 0 is returned without any other check.
2. For clearing ro to eMMC area, write-proetction status is checked:
2a. For boot0 or boot1 partition, boot_wp_status get from EXTCSD is
    checked.
    -EACCES is returned when the target boot partition is write-protected;
    0 is returned otherwise.
2b. For user area partition, one or more MMC_SEND_WRITE_PROT_TYPE commands
    are sent to get/check write-protection status of target address range.
    -EACCES is returned when target address range is fully/partially
            write-protected;
    0 is returned otherwise.

With the above implementation and correct ioctl parameters, return value
of __blkdev_driver_ioctl() will be 0 or -EACCES. blkdev_roset() can continue
to clear ro attribute when return value is 0, which means whole target eMMC
address range is not write-protected.

Signed-off-by: Light Hsieh <light.hsieh@...iatek.com>
---
 block/ioctl.c            |   2 +-
 drivers/mmc/core/block.c | 216 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/mmc.h  |   1 +
 3 files changed, 218 insertions(+), 1 deletion(-)

diff --git a/block/ioctl.c b/block/ioctl.c
index 127194b..af047a0 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -485,7 +485,7 @@ static int blkdev_roset(struct block_device *bdev, fmode_t mode,
 		return -EACCES;
 
 	ret = __blkdev_driver_ioctl(bdev, mode, cmd, arg);
-	if (!is_unrecognized_ioctl(ret))
+	if (ret && !is_unrecognized_ioctl(ret))
 		return ret;
 	if (get_user(n, (int __user *)arg))
 		return -EFAULT;
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 663d879..ee85abf 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -778,6 +778,220 @@ static int mmc_blk_check_blkdev(struct block_device *bdev)
 	return 0;
 }
 
+#define MMC_BLK_NO_WP           0
+#define MMC_BLK_PARTIALLY_WP    1
+#define MMC_BLK_FULLY_WP        2
+
+static int mmc_blk_check_disk_range_wp(struct gendisk *disk,
+	sector_t part_start, sector_t part_nr_sects)
+{
+	struct mmc_command cmd = {0};
+	struct mmc_request mrq = {NULL};
+	struct mmc_data data = {0};
+	struct mmc_blk_data *md;
+	struct mmc_card *card;
+	struct scatterlist sg;
+	unsigned char *buf = NULL, status;
+	sector_t start, end, quot;
+	sector_t wp_grp_rem, wp_grp_total, wp_grp_found, status_query_cnt;
+	unsigned int remain;
+	int err = 0, i, j, k;
+	u8 boot_wp_status = 0;
+
+	md = mmc_blk_get(disk);
+	if (!md)
+		return -EINVAL;
+
+	if (!md->queue.card) {
+		err = -EINVAL;
+		goto out2;
+	}
+
+	card = md->queue.card;
+	if (!mmc_card_mmc(card) ||
+		md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
+		err = MMC_BLK_NO_WP;
+		goto out2;
+	}
+
+	if (md->part_type == 0)
+		goto check_user_area_wp_status;
+
+	/* BOOT_WP_STATUS in EXT_CSD:
+	 * |-----bit[7:4]-----|-------bit[3:2]--------|-------bit[1:0]--------|
+	 * |-----reserved-----|----boot1 wp status----|----boot0 wp status----|
+	 * boot0 area wp type:depending on bit[1:0]
+	 * 0->not wp; 1->power on wp; 2->permanent wp; 3:reserved value
+	 * boot1 area wp type:depending on bit[3:2]
+	 * 0->not wp; 1->power on wp; 2->permanent wp; 3:reserved value
+	 */
+	if (md->part_type == EXT_CSD_PART_CONFIG_ACC_BOOT0)
+		boot_wp_status = card->ext_csd.boot_wp_status & 0x3;
+	else if (md->part_type == (EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1))
+		boot_wp_status = (card->ext_csd.boot_wp_status >> 2) & 0x3;
+
+	if (boot_wp_status == 0x1 || boot_wp_status == 0x2) {
+		pr_notice("%s is fully write protected\n", disk->disk_name);
+		err = MMC_BLK_FULLY_WP;
+	} else
+		err = MMC_BLK_NO_WP;
+	goto out2;
+
+check_user_area_wp_status:
+	if (!card->wp_grp_size) {
+		pr_notice("Write protect group size cannot be 0!\n");
+		err = -EINVAL;
+		goto out2;
+	}
+
+	start = part_start;
+	quot = start;
+	remain = do_div(quot, card->wp_grp_size);
+	if (remain) {
+		pr_notice("Start 0x%llx of disk %s not write group aligned\n",
+			(unsigned long long)part_start, disk->disk_name);
+		start -= remain;
+	}
+
+	end = part_start + part_nr_sects;
+	quot = end;
+	remain = do_div(quot, card->wp_grp_size);
+	if (remain) {
+		pr_notice("End 0x%llx of disk %s not write group aligned\n",
+			(unsigned long long)part_start, disk->disk_name);
+		end += card->wp_grp_size - remain;
+	}
+	wp_grp_total = end - start;
+	do_div(wp_grp_total, card->wp_grp_size);
+	wp_grp_rem = wp_grp_total;
+	wp_grp_found = 0;
+
+	cmd.opcode = MMC_SEND_WRITE_PROT_TYPE;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	buf = kmalloc(8, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto out2;
+	}
+	sg_init_one(&sg, buf, 8);
+
+	data.blksz = 8;
+	data.blocks = 1;
+	data.flags = MMC_DATA_READ;
+	data.sg = &sg;
+	data.sg_len = 1;
+	mmc_set_data_timeout(&data, card);
+
+	mrq.cmd = &cmd;
+	mrq.data = &data;
+
+	mmc_get_card(card, NULL);
+
+	err = mmc_blk_part_switch(card, md->part_type);
+	if (err) {
+		err = -EIO;
+		goto out;
+	}
+
+	status_query_cnt = (wp_grp_total + 31) / 32;
+	for (i = 0; i < status_query_cnt; i++) {
+		cmd.arg = start + i * card->wp_grp_size * 32;
+		mmc_wait_for_req(card->host, &mrq);
+		if (cmd.error) {
+			pr_notice("%s: cmd error %d\n", __func__, cmd.error);
+			err = -EIO;
+			goto out;
+		}
+
+		/* wp status is returned in 8 bytes.
+		 * The 8 bytes are regarded as 64-bits bit-stream:
+		 * +--------+--------+-------------------------+--------+
+		 * | byte 7 | byte 6 |           ...           | byte 0 |
+		 * |  bits  |  bits  |                         |  bits  |
+		 * |76543210|76543210|                         |76543210|
+		 * +--------+--------+-------------------------+--------+
+		 *   The 2 LSBits represent write-protect group status of
+		 *       the lowest address group being queried.
+		 *   The 2 MSBits represent write-protect group status of
+		 *       the highest address group being queried.
+		 */
+		/* Check write-protect group status from lowest address
+		 *   group to highest address group
+		 */
+		for (j = 0; j < 8; j++) {
+			status = buf[7 - j];
+			for (k = 0; k < 8; k += 2) {
+				if (status & (3 << k))
+					wp_grp_found++;
+				wp_grp_rem--;
+				if (!wp_grp_rem)
+					goto out;
+			}
+		}
+
+		memset(buf, 0, 8);
+	}
+
+out:
+	mmc_put_card(card, NULL);
+	if (!wp_grp_rem) {
+		if (!wp_grp_found)
+			err = MMC_BLK_NO_WP;
+		else if (wp_grp_found == wp_grp_total) {
+			pr_notice("0x%llx ~ 0x%llx of %s is fully write protected\n",
+				(unsigned long long)part_start,
+				(unsigned long long)part_start + part_nr_sects,
+				disk->disk_name);
+			err = MMC_BLK_FULLY_WP;
+		} else {
+			pr_notice("0x%llx ~ 0x%llx of %s is %u%% write protected\n",
+				wp_grp_found * 100 / wp_grp_total,
+				(unsigned long long)part_start,
+				(unsigned long long)part_start + part_nr_sects,
+				disk->disk_name);
+			err = MMC_BLK_PARTIALLY_WP;
+		}
+	}
+
+	kfree(buf);
+
+out2:
+	mmc_blk_put(md);
+	return err;
+}
+
+static int mmc_blk_check_wp(struct block_device *bdev)
+{
+	if (!bdev->bd_disk || !bdev->bd_part)
+		return -EINVAL;
+
+	return mmc_blk_check_disk_range_wp(bdev->bd_disk,
+		bdev->bd_part->start_sect,
+		bdev->bd_part->nr_sects);
+}
+
+static int mmc_blk_ioctl_roset(struct block_device *bdev,
+	unsigned long arg)
+{
+	int val;
+
+	/* Always return -EACCES to block layer on any error
+	 * and then block layer will abort the remaining operation
+	 */
+	if (get_user(val, (int __user *)arg))
+		return -EACCES;
+
+	/* No need to check write-protect status when setting as readonly */
+	if (val)
+		return 0;
+
+	if (mmc_blk_check_wp(bdev) != MMC_BLK_NO_WP)
+		return -EACCES;
+
+	return 0;
+}
+
 static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
 	unsigned int cmd, unsigned long arg)
 {
@@ -809,6 +1023,8 @@ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
 					NULL);
 		mmc_blk_put(md);
 		return ret;
+	case BLKROSET:
+		return mmc_blk_ioctl_roset(bdev, arg);
 	default:
 		return -EINVAL;
 	}
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 2c9d988..f7c1237 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@
 #define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
 #define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
 #define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
+#define MMC_SEND_WRITE_PROT_TYPE 31   /* adtc [31:0] wpdata addr R1  */
 
   /* class 5 */
 #define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
-- 
1.8.1.1.dirty

Powered by blists - more mailing lists