| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200304052235.mvpjqa2u56joew3r@pengutronix.de>
Date: Wed, 4 Mar 2020 06:22:35 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Biwen Li <biwen.li@....com>
Cc: Sascha Hauer <s.hauer@...gutronix.de>,
Aisheng Dong <aisheng.dong@....com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"wsa@...-dreams.de" <wsa@...-dreams.de>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Xiaobo Xie <xiaobo.xie@....com>, Leo Li <leoyang.li@....com>,
Clark Wang <xiaoning.wang@....com>,
dl-linux-imx <linux-imx@....com>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
Jiafei Pan <jiafei.pan@....com>,
Laurentiu Tudor <laurentiu.tudor@....com>,
"festevam@...il.com" <festevam@...il.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>
Subject: Re: [EXT] Re: [v6] i2c: imx: support slave mode for imx I2C driver
Hi Biwen,
On Wed, Mar 04, 2020 at 04:13:03AM +0000, Biwen Li wrote:
> Hi Wolfram,
>
> Any comments?
Wolfram is waiting until you react to our comments. Until this is not
happened, I will not ACK this patch and Wolfram will not take it.
regards,
Oleksij
> Best Regards,
> Biwen Li
>
> >
> > Hi,
> >
> > On 04.12.19 11:00, Sascha Hauer wrote:
> > > Hi,
> > >
> > > The patch looks ok to me now, but I still do not like the #ifdeffery
> > > around CONFIG_I2C_SLAVE. With the patch I just sent (You are on Cc:)
> > > we could apply the following on your patch which makes it more
> > > readable and increases compile coverage.
> > >
> > > Wolfram, Biwen, what do you think?
> >
> >
> > RCAR depends on slave:
> > config I2C_RCAR
> >
> > tristate "Renesas R-Car I2C Controller"
> >
> > depends on ARCH_RENESAS || COMPILE_TEST
> >
> > select I2C_SLAVE
> > see:
> > drivers/i2c/busses/i2c-rcar.c
> >
> > So, I would suggest to do the same in imx.
> >
> > So far, I tested this patch on iMX6S. It works in one board (i2c-gpio + i2c-imx)
> > and two board (i2c-imx + i2c-imx) configuration.
> > Tested-by: Oleksij Rempel <o.rempel@...gutronix.de>
> >
> >
> > >
> > > Sascha
> > >
> > > ---------------------------8<------------------------------
> > >
> > > From 52f7c2bf59db61d4b27b59ca6404136e3ed77310 Mon Sep 17
> > 00:00:00
> > > 2001
> > > From: Sascha Hauer <s.hauer@...gutronix.de>
> > > Date: Wed, 4 Dec 2019 10:56:34 +0100
> > > Subject: [PATCH] fixup! i2c: imx: support slave mode for imx I2C
> > > driver
> > >
> > > ---
> > > drivers/i2c/busses/i2c-imx.c | 21 ++++++++++-----------
> > > 1 file changed, 10 insertions(+), 11 deletions(-)
> > >
> > > diff --git a/drivers/i2c/busses/i2c-imx.c
> > > b/drivers/i2c/busses/i2c-imx.c index 40ccfca600bf..c5d9ae8226cd 100644
> > > --- a/drivers/i2c/busses/i2c-imx.c
> > > +++ b/drivers/i2c/busses/i2c-imx.c
> > > @@ -203,9 +203,7 @@ struct imx_i2c_struct {
> > > struct pinctrl_state *pinctrl_pins_gpio;
> > >
> > > struct imx_i2c_dma *dma;
> > > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > struct i2c_client *slave;
> > > -#endif
> > > };
> > >
> > > static const struct imx_i2c_hwdata imx1_i2c_hwdata = { @@ -913,12
> > > +911,10 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
> > >
> > > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
> > >
> > > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > if (i2c_imx->slave) {
> > > dev_err(&i2c_imx->adapter.dev, "Please not do operations
> > of master mode in slave mode");
> > > return -EBUSY;
> > > }
> > > -#endif
> > >
> > > result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> > > if (result < 0)
> > > @@ -1068,7 +1064,6 @@ static u32 i2c_imx_func(struct i2c_adapter
> > *adapter)
> > > | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> > > }
> > >
> > > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > static int i2c_imx_slave_init(struct imx_i2c_struct *i2c_imx)
> > > {
> > > int temp;
> > > @@ -1159,6 +1154,10 @@ static int i2c_imx_reg_slave(struct i2c_client
> > *client)
> > > {
> > > struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(client->adapter);
> > > int ret;
> > > +
> > > + if (!IS_ENABLED(CONFIG_I2C_SLAVE))
> > > + return -EINVAL;
> > > +
> > > if (i2c_imx->slave)
> > > return -EBUSY;
> > >
> > > @@ -1173,6 +1172,9 @@ static int i2c_imx_unreg_slave(struct i2c_client
> > *client)
> > > {
> > > struct imx_i2c_struct *i2c_imx =
> > > i2c_get_adapdata(client->adapter);
> > >
> > > + if (!IS_ENABLED(CONFIG_I2C_SLAVE))
> > > + return -EINVAL;
> > > +
> > > if (!i2c_imx->slave)
> > > return -EINVAL;
> > >
> > > @@ -1188,15 +1190,12 @@ static int i2c_imx_unreg_slave(struct
> > > i2c_client *client)
> > >
> > > return 0;
> > > }
> > > -#endif
> > >
> > > static const struct i2c_algorithm i2c_imx_algo = {
> > > .master_xfer = i2c_imx_xfer,
> > > .functionality = i2c_imx_func,
> > > -#if IS_ENABLED(CONFIG_I2C_SLAVE)
> > > .reg_slave = i2c_imx_reg_slave,
> > > .unreg_slave = i2c_imx_unreg_slave,
> > > -#endif
> > > };
> > >
> > > static irqreturn_t i2c_imx_isr(int irq, void *dev_id) @@ -1208,10
> > > +1207,10 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
> > >
> > > if (status & I2SR_IIF) {
> > > i2c_imx_clr_if_bit(status, i2c_imx); -#if
> > > IS_ENABLED(CONFIG_I2C_SLAVE)
> > > - if (i2c_imx->slave)
> > > +
> > > + if (IS_ENABLED(CONFIG_I2C_SLAVE) && i2c_imx->slave)
> > > return i2c_imx_slave_isr(i2c_imx); -#endif
> > > +
> > > i2c_imx->i2csr = status;
> > > return i2c_imx_master_isr(i2c_imx);
> > > }
> > >
> >
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists