linux-kernel - Re: [PATCH v2 4/7] KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CALMp9eRxdGj0DL0_g-an0YC+gTMcWcSk7=md=k4-8S0Zcankbg@mail.gmail.com>
Date:   Thu, 5 Mar 2020 13:10:57 -0800
From:   Jim Mattson <jmattson@...gle.com>
To:     Sean Christopherson <sean.j.christopherson@...el.com>
Cc:     Paolo Bonzini <pbonzini@...hat.com>,
        Vitaly Kuznetsov <vkuznets@...hat.com>,
        Wanpeng Li <wanpengli@...cent.com>,
        Joerg Roedel <joro@...tes.org>, kvm list <kvm@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>, Pu Wen <puwen@...on.cn>
Subject: Re: [PATCH v2 4/7] KVM: x86: Fix CPUID range checks for Hypervisor
 and Centaur classes

On Thu, Mar 5, 2020 at 11:25 AM Sean Christopherson
<sean.j.christopherson@...el.com> wrote:
>
> On Thu, Mar 05, 2020 at 10:43:51AM -0800, Jim Mattson wrote:
> > On Wed, Mar 4, 2020 at 5:34 PM Sean Christopherson
> > <sean.j.christopherson@...el.com> wrote:
> > >
> > > Rework the masking in the out-of-range CPUID logic to handle the
> > > Hypervisor sub-classes, as well as the Centaur class if the guest
> > > virtual CPU vendor is Centaur.
> > >
> > > Masking against 0x80000000 only handles basic and extended leafs, which
> > > results in Hypervisor range checks being performed against the basic
> > > CPUID class, and Centuar range checks being performed against the
> > > Extended class.  E.g. if CPUID.0x40000000.EAX returns 0x4000000A and
> > > there is no entry for CPUID.0x40000006, then function 0x40000006 would
> > > be incorrectly reported as out of bounds.
> > >
> > > While there is no official definition of what constitutes a class, the
> > > convention established for Hypervisor classes effectively uses bits 31:8
> > > as the mask by virtue of checking for different bases in increments of
> > > 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100
> > > when HyperV features are advertised at the default base of 0x40000000.
> > >
> > > The bad range check doesn't cause functional problems for any known VMM
> > > because out-of-range semantics only come into play if the exact entry
> > > isn't found, and VMMs either support a very limited Hypervisor range,
> > > e.g. the official KVM range is 0x40000000-0x40000001 (effectively no
> > > room for undefined leafs) or explicitly defines gaps to be zero, e.g.
> > > Qemu explicitly creates zeroed entries up to the Cenatur and Hypervisor
> > > limits (the latter comes into play when providing HyperV features).
> > >
> > > The bad behavior can be visually confirmed by dumping CPUID output in
> > > the guest when running Qemu with a stable TSC, as Qemu extends the limit
> > > of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq,
> > > without defining zeroed entries for 0x40000002 - 0x4000000f.
> > >
> > > Note, documentation of Centaur/VIA CPUs is hard to come by.  Designating
> > > 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the
> > > behavior of a real Centaur/VIA CPU.
> >
> > Don't forget Transmeta's CPUID range at 0x80860000 through 0x8086FFFF!
>
> Hmm, is it actually needed here?  KVM doesn't advertise support for that
> range in KVM_GET_SUPPORTED_CPUID.  That's also why I limited the Centaur
> range to vendor==CENTAUR, as KVM_GET_SUPPORTED_CPUID enumerates the
> Centaur range if and only if the host CPU is Centaur.

Ah. So cross-vendor CPUID specifications are not supported?