| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqJ3UVG=pVqZyju1qis_Y3dVT6swLEAkK=Myi331Pomvyg@mail.gmail.com>
Date: Thu, 5 Mar 2020 15:40:18 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Stephen Boyd <swboyd@...omium.org>
Cc: Prashant Malani <pmalani@...omium.org>, devicetree@...r.kernel.org,
Benson Leung <bleung@...omium.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
"Bryan O'Donoghue" <bryan.odonoghue@...aro.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
Linux USB List <linux-usb@...r.kernel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Subject: Re: [PATCH v2] dt-bindings: Convert usb-connector to YAML format.
On Thu, Mar 5, 2020 at 3:20 PM Stephen Boyd <swboyd@...omium.org> wrote:
>
> Quoting Prashant Malani (2020-03-04 19:01:30)
> > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > new file mode 100644
> > index 0000000000000..b386e2880405c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > @@ -0,0 +1,203 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/connector/usb-connector.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: USB Connector
> > +
> > +maintainers:
> > + - linux-usb@...r.kernel.org
> > +
> > +description:
> > + A USB connector node represents a physical USB connector. It should be a child
> > + of a USB interface controller.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - usb-a-connector
> > + - usb-b-connector
> > + - usb-c-connector
> > +
> > + label:
> > + description: Symbolic name for the connector.
> > +
> > + type:
> > + description: Size of the connector, should be specified in case of USB-A,
> > + USB-B non-fullsize connectors.
>
> Maybe "should be specified in case of non-fullsize 'usb-a-connector' or
> 'usb-b-connector' compatible connectors"?
>
> > + $ref: /schemas/types.yaml#definitions/string
> > + enum:
> > + - mini
> > + - micro
> > +
> > + self-powered:
> > + description: Set this property if the USB device has its own power source.
> > + type: boolean
> > +
> > + # The following are optional properties for "usb-b-connector".
> > + id-gpios:
> > + description: An input gpio for USB ID pin.
> > + maxItems: 1
> > +
> > + vbus-gpios:
> > + description: An input gpio for USB VBus pin, used to detect presence of
> > + VBUS 5V. See gpio/gpio.txt.
>
> Can this be written as bindings/gpio/gpio.txt?
Or just drop the reference so we don't have to fix it later.
> > + maxItems: 1
> > +
> > + vbus-supply:
> > + description: A phandle to the regulator for USB VBUS if needed when host
> > + mode or dual role mode is supported.
> > + Particularly, if use an output GPIO to control a VBUS regulator, should
> > + model it as a regulator. See regulator/fixed-regulator.yaml
>
> And bindings/regulator/fixed-regulator.yaml? The idea is to
> disambiguate from kernel Documentation/ directory.
>
> > +
> > + # The following are optional properties for "usb-c-connector".
>
> Is there a way to constrain the binding so that this can't be put in a
> connector that doesn't have the usb-c-connector compatible string?
Yes, with if/then and setting excluded properties to 'false'.
Personally, I don't think it is worth the messiness. I'm not too
worried if folks put in properties that are going to be ignored.
Rob
> > + power-role:
> > + description: Determines the power role that the Type C connector will
> > + support. "dual" refers to Dual Role Port (DRP).
> > + allOf:
> > + - $ref: /schemas/types.yaml#definitions/string
> > + enum:
> > + - source
> > + - sink
> > + - dual
> > +
> > + try-power-role:
> > + description: Preferred power role.
> > + allOf:
> > + - $ref: /schemas/types.yaml#definitions/string
> > + enum:
> > + - source
> > + - sink
> > + - dual
> > +
> > + data-role:
> > + description: Data role if Type C connector supports USB data. "dual" refers
> > + Dual Role Device (DRD).
> > + allOf:
> > + - $ref: /schemas/types.yaml#definitions/string
> > + enum:
> > + - host
> > + - device
> > + - dual
>
> Is there a way to maintain a description for each possible string
> property? Then we could move the last sentence in the description above
> to be attached to '- dual' here.
>
> > +
> > + # The following are optional properties for "usb-c-connector" with power
> > + # delivery support.
> > + source-pdos:
> > + description: An array of u32 with each entry providing supported power
> > + source data object(PDO), the detailed bit definitions of PDO can be found
> > + in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2
> > + Source_Capabilities Message, the order of each entry(PDO) should follow
> > + the PD spec chapter 6.4.1. Required for power source and power dual role.
> > + User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()
> > + defined in dt-bindings/usb/pd.h.
> > + minItems: 1
> > + maxItems: 7
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > +
> > + sink-pdos:
> > + description: An array of u32 with each entry providing supported power sink
> > + data object(PDO), the detailed bit definitions of PDO can be found in
> > + "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3
> > + Sink Capabilities Message, the order of each entry(PDO) should follow the
> > + PD spec chapter 6.4.1. Required for power sink and power dual role. User
> > + can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
> > + in dt-bindings/usb/pd.h.
> > + minItems: 1
> > + maxItems: 7
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > +
> > + op-sink-microwatt:
> > + description: Sink required operating power in microwatt, if source can't
> > + offer the power, Capability Mismatch is set. Required for power sink and
> > + power dual role.
> > +
> > + ports:
> > + description: OF graph bindings (specified in bindings/graph.txt) that model
> > + any data bus to the connector unless the bus is between parent node and
> > + the connector. Since a single connector can have multiple data buses every
> > + bus has assigned OF graph port number as described below.
>
> has an assigned?
>
> > + type: object
> > + properties:
> > + port@0:
> > + type: object
> > + description: High Speed (HS), present in all connectors.
> > +
> > + port@1:
> > + type: object
> > + description: Super Speed (SS), present in SS capable connectors.
> > +
> > + port@2:
> > + type: object
> > + description: Sideband Use (SBU), present in USB-C.
>
> Likewise, is it possible to constrain this to only usb-c-connector
> compatible string based bindings? And if so, does it become required for
> that compatible string?
Not required as alternate modes are not required. (BTW, it should
probably be clarified this is supposed to be the alternate mode
connection of which SBU is part of).
Rob
Powered by blists - more mailing lists