linux-kernel - Re: [PATCH v12 0/4] Invoke rpmh

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 5 Mar 2020 14:22:41 -0800
From:   Doug Anderson <dianders@...omium.org>
To:     Maulik Shah <mkshah@...eaurora.org>
Cc:     Stephen Boyd <swboyd@...omium.org>,
        Matthias Kaehlcke <mka@...omium.org>,
        Evan Green <evgreen@...omium.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        LKML <linux-kernel@...r.kernel.org>,
        linux-arm-msm <linux-arm-msm@...r.kernel.org>,
        Andy Gross <agross@...nel.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Lina Iyer <ilina@...eaurora.org>, lsrao@...eaurora.org
Subject: Re: [PATCH v12 0/4] Invoke rpmh_flush for non OSI targets

Hi,

On Thu, Mar 5, 2020 at 9:07 AM Maulik Shah <mkshah@...eaurora.org> wrote:
>
> Changes in v12:
> - Kconfig change to remove COMPILE_TEST was dropped in v11, reinclude it.
>
> Changes in v11:
> - Address Doug's comments on change 2 and 3
> - Include change to invalidate TCSes before flush from [4]
>
> Changes in v10:
> - Address Evan's comments to update commit message on change 2
> - Add Evan's Reviewed by on change 2
> - Remove comment from rpmh_flush() related to last CPU invoking it
> - Rebase all changes on top of next-20200302
>
> Changes in v9:
> - Keep rpmh_flush() to invoke from within cache_lock
> - Remove comments related to only last cpu invoking rpmh_flush()
>
> Changes in v8:
> - Address Stephen's comments on changes 2 and 3
> - Add Reviewed by from Stephen on change 1
>
> Changes in v7:
> - Address Srinivas's comments to update commit text
> - Add Reviewed by from Srinivas
>
> Changes in v6:
> - Drop 1 & 2 changes from v5 as they already landed in maintainer tree
> - Drop 3 & 4 changes from v5 as no user at present for power domain in rsc
> - Rename subject to appropriate since power domain changes are dropped
> - Rebase other changes on top of next-20200221
>
> Changes in v5:
> - Add Rob's Acked by on dt-bindings change
> - Drop firmware psci change
> - Update cpuidle stats in dtsi to follow PC mode
> - Include change to update dirty flag when data is updated from [4]
> - Add change to invoke rpmh_flush when caches are dirty
>
> Changes in v4:
> - Add change to allow hierarchical topology in PC mode
> - Drop hierarchical domain idle states converter from v3
> - Address Merge sc7180 dtsi change to add low power modes
>
> Changes in v3:
> - Address Rob's comment on dt property value
> - Address Stephen's comments on rpmh-rsc driver change
> - Include sc7180 cpuidle low power mode changes from [1]
> - Include hierarchical domain idle states converter change from [2]
>
> Changes in v2:
> - Add Stephen's Reviewed-By to the first three patches
> - Addressed Stephen's comments on fourth patch
> - Include changes to connect rpmh domain to cpuidle and genpds
>
> Resource State Coordinator (RSC) is responsible for powering off/lowering
> the requirements from CPU subsystem for the associated hardware like buses,
> clocks, and regulators when all CPUs and cluster is powered down.
>
> RSC power domain uses last-man activities provided by genpd framework based
> on Ulf Hansoon's patch series[3], when the cluster of CPUs enter deepest
> idle states. As a part of domain poweroff, RSC can lower resource state
> requirements by flushing the cached sleep and wake state votes for various
> resources.
>
> [1] https://patchwork.kernel.org/patch/11218965
> [2] https://patchwork.kernel.org/patch/10941671
> [3] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=222355
> [4] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=236503
>
> Maulik Shah (3):
>   arm64: dts: qcom: sc7180: Add cpuidle low power states
>   soc: qcom: rpmh: Update dirty flag only when data changes
>   soc: qcom: rpmh: Invoke rpmh_flush for dirty caches
>
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 78 ++++++++++++++++++++++++++++++++++++
>  drivers/soc/qcom/rpmh.c              | 27 ++++++++++---
>  2 files changed, 100 insertions(+), 5 deletions(-)

One overall optimization idea?

Should we add two API calls:

rpmh_start_operations()
rpmh_end_operations()

These optional API calls would be an optimization a client could use.
When rpmh_start_operations() is called then RPMH code will inhibit
flushing (but will still update the "dirty" flag).  When
rpmh_end_operations() is called then the RPMH will flush if the dirty
flag is set.

This is a pretty simple concept but should have a huge impact in the
number of times we program hardware in non-OSI mode.  Specifically, if
we don't do that and we look at what happens in the interconnect code:

1. We "invalidate" the batch.  We have to flush the non-batch commands
back into the hardware.

2. We program the "wake only" commands.  We have to flush the batch
wake-only commands and also the non-batch commands back into the
hardware.

3. We program the "sleep only" commands.  We have to flush yet again
with everything.



-Doug