lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200305051143.60691-4-samuel@sholland.org>
Date:   Wed,  4 Mar 2020 23:11:43 -0600
From:   Samuel Holland <samuel@...lland.org>
To:     Mark Brown <broonie@...nel.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>,
        Jonathan Corbet <corbet@....net>,
        Jerome Brunet <jbrunet@...libre.com>
Cc:     Ondrej Jirman <megous@...ous.com>, alsa-devel@...a-project.org,
        linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
        Samuel Holland <samuel@...lland.org>
Subject: [PATCH v4 3/3] ASoC: simple-card: Add support for codec2codec DAI links

Following the example in cb2cf0de1174 ("ASoC: soc-core: care Codec <->
Codec case by non_legacy_dai_naming"), determine if a DAI link contains
only codec DAIs by examining the non_legacy_dai_naming flag in each
DAI's component.

For now, we assume there is only one or a small set of valid PCM stream
parameters, so num_params == 1 is good enough. We also assume that the
same params are valid for all supported streams. params is set to the
subset of parameters common among all DAIs, and then the existing code
automatically chooses the highest quality of the remaining values when
the link is brought up.

Signed-off-by: Samuel Holland <samuel@...lland.org>
---
 Documentation/sound/soc/codec-to-codec.rst |  9 +++-
 sound/soc/generic/simple-card-utils.c      | 48 ++++++++++++++++++++++
 2 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
index 810109d7500d..4eaa9a0c41fc 100644
--- a/Documentation/sound/soc/codec-to-codec.rst
+++ b/Documentation/sound/soc/codec-to-codec.rst
@@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
 dai names ending with "Playback" and "Capture" respectively as dapm core
 will link and power those dais based on the name.
 
-Note that in current device tree there is no way to mark a dai_link
-as codec to codec. However, it may change in future.
+A dai_link in a "simple-audio-card" will automatically be detected as
+codec to codec when all DAIs on the link belong to codec components.
+The dai_link will be initialized with the subset of stream parameters
+(channels, format, sample rate) supported by all DAIs on the link. Since
+there is no way to provide these parameters in the device tree, this is
+mostly useful for communication with simple fixed-function codecs, such
+as a Bluetooth controller or cellular modem.
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 9b794775df53..320e648f7499 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -331,6 +331,50 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
 	return 0;
 }
 
+static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
+					    struct simple_dai_props *dai_props)
+{
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_component *component;
+	struct snd_soc_pcm_stream *params;
+	struct snd_pcm_hardware hw;
+	int i, ret, stream;
+
+	/* Only codecs should have non_legacy_dai_naming set. */
+	for_each_rtd_components(rtd, i, component) {
+		if (!component->driver->non_legacy_dai_naming)
+			return 0;
+	}
+
+	/* Assumes the capabilities are the same for all supported streams */
+	for (stream = 0; stream < 2; stream++) {
+		ret = snd_soc_runtime_calc_hw(rtd, &hw, stream);
+		if (ret == 0)
+			break;
+	}
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
+		return ret;
+	}
+
+	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
+	if (!params)
+		return -ENOMEM;
+
+	params->formats = hw.formats;
+	params->rates = hw.rates;
+	params->rate_min = hw.rate_min;
+	params->rate_max = hw.rate_max;
+	params->channels_min = hw.channels_min;
+	params->channels_max = hw.channels_max;
+
+	dai_link->params = params;
+	dai_link->num_params = 1;
+
+	return 0;
+}
+
 int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
@@ -347,6 +391,10 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
 	if (ret < 0)
 		return ret;
 
+	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
-- 
2.24.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ