| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <59f5554c-3343-7bf6-d7d8-bba53710afae@samsung.com>
Date: Thu, 5 Mar 2020 11:50:37 +0100
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: madhuparnabhowmik10@...il.com, paulmck@...nel.org,
josh@...htriplett.org, rostedt@...dmis.org,
mathieu.desnoyers@...icios.com, jiangshanlai@...il.com,
joel@...lfernandes.org
Cc: linux-kernel@...r.kernel.org, Amol Grover <frextrite@...il.com>,
'Linux Samsung SOC' <linux-samsung-soc@...r.kernel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
"linux-pm@...r.kernel.org" <linux-pm@...r.kernel.org>
Subject: Re: [PATCH] Default enable RCU list lockdep debugging with
PROVE_RCU
Dear All,
On 28.02.2020 10:24, madhuparnabhowmik10@...il.com wrote:
> From: Madhuparna Bhowmik <madhuparnabhowmik10@...il.com>
>
> This patch default enables CONFIG_PROVE_RCU_LIST option with
> CONFIG_PROVE_RCU for RCU list lockdep debugging.
>
> With this change, RCU list lockdep debugging will be default
> enabled in CONFIG_PROVE_RCU=y kernels.
>
> Most of the RCU users (in core kernel/, drivers/, and net/
> subsystem) have already been modified to include lockdep
> expressions hence RCU list debugging can be enabled by
> default.
>
> However, there are still chances of enountering
> false-positive lockdep splats because not everything is converted,
> in case RCU list primitives are used in non-RCU read-side critical
> section but under the protection of a lock. It would be okay to
> have a few false-positives, as long as bugs are identified, since this
> patch only affects debugging kernels.
>
> Co-developed-by: Amol Grover <frextrite@...il.com>
> Signed-off-by: Amol Grover <frextrite@...il.com>
> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@...il.com>
This patch landed in today's linux-next (20200305) as commit
c9af03c14bfdfd21515e556c3a90ffe2aadc964d. It causes the following kernel
warning during system suspend/resume cycle on all ARM 32bit Samsung
Exynos-based boards (kernel compiled from exynos_defconfig):
# rtcwake -s 10 -m mem
rtcwake: wakeup from "mem" using /dev/rtc0 at Sat Jan 1 00:01:13 2000
PM: suspend entry (deep)
Filesystems sync: 0.008 seconds
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.013 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/main.c:326 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: c1285d98 (device_links_srcu){....}, at:
device_links_read_lock+0x0/0x50
stack backtrace:
CPU: 7 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c061ea2c>]
(dpm_wait_for_subordinate+0xf4/0xfc)
[<c061ea2c>] (dpm_wait_for_subordinate) from [<c061f578>]
(__device_suspend+0x20/0x838)
[<c061f578>] (__device_suspend) from [<c0622e1c>] (dpm_suspend+0x188/0x57c)
[<c0622e1c>] (dpm_suspend) from [<c0623bfc>] (dpm_suspend_start+0x98/0xa0)
[<c0623bfc>] (dpm_suspend_start) from [<c0197e20>]
(suspend_devices_and_enter+0xec/0xc74)
[<c0197e20>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/main.c:1698 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
6 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: ebecd984 (&dev->mutex){....}, at: __device_suspend+0xf8/0x838
#5: c1285d98 (device_links_srcu){....}, at:
device_links_read_lock+0x0/0x50
stack backtrace:
CPU: 7 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c061f8bc>] (__device_suspend+0x364/0x838)
[<c061f8bc>] (__device_suspend) from [<c0622e1c>] (dpm_suspend+0x188/0x57c)
[<c0622e1c>] (dpm_suspend) from [<c0623bfc>] (dpm_suspend_start+0x98/0xa0)
[<c0623bfc>] (dpm_suspend_start) from [<c0197e20>]
(suspend_devices_and_enter+0xec/0xc74)
[<c0197e20>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
wake enabled for irq 160
wake enabled for irq 164
samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt
mask: 0xffffffe7
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/wakeup.c:408 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: c128722c (wakeup_srcu){....}, at:
device_wakeup_arm_wake_irqs+0x0/0x124
stack backtrace:
CPU: 5 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c0625740>]
(device_wakeup_arm_wake_irqs+0xdc/0x124)
[<c0625740>] (device_wakeup_arm_wake_irqs) from [<c0622120>]
(dpm_suspend_noirq+0x1c/0x5a0)
[<c0622120>] (dpm_suspend_noirq) from [<c019805c>]
(suspend_devices_and_enter+0x328/0xc74)
[<c019805c>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/main.c:1238 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: c1285d98 (device_links_srcu){....}, at:
device_links_read_lock+0x0/0x50
stack backtrace:
CPU: 5 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c06202d4>]
(__device_suspend_noirq+0x234/0x304)
[<c06202d4>] (__device_suspend_noirq) from [<c0622284>]
(dpm_suspend_noirq+0x180/0x5a0)
[<c0622284>] (dpm_suspend_noirq) from [<c019805c>]
(suspend_devices_and_enter+0x328/0xc74)
[<c019805c>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
Disabling non-boot CPUs ...
IRQ 51: no longer affine to CPU1
IRQ 52: no longer affine to CPU2
IRQ 53: no longer affine to CPU3
IRQ 54: no longer affine to CPU4
IRQ 55: no longer affine to CPU5
IRQ 56: no longer affine to CPU6
IRQ 57: no longer affine to CPU7
Enabling non-boot CPUs ...
CPU1 is up
CPU2 is up
CPU3 is up
CPU4: detected I-Cache line size mismatch, workaround enabled
CPU4 is up
CPU5: detected I-Cache line size mismatch, workaround enabled
CPU5 is up
CPU6: detected I-Cache line size mismatch, workaround enabled
CPU6 is up
CPU7: detected I-Cache line size mismatch, workaround enabled
CPU7 is up
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/main.c:269 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: c1285d98 (device_links_srcu){....}, at:
device_links_read_lock+0x0/0x50
stack backtrace:
CPU: 0 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c061ebf0>]
(dpm_wait_for_superior+0x114/0x12c)
[<c061ebf0>] (dpm_wait_for_superior) from [<c061fe98>]
(device_resume_noirq+0x74/0x238)
[<c061fe98>] (device_resume_noirq) from [<c0620a34>]
(dpm_resume_noirq+0x160/0x53c)
[<c0620a34>] (dpm_resume_noirq) from [<c01983c8>]
(suspend_devices_and_enter+0x694/0xc74)
[<c01983c8>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
s3c-i2c 12c80000.i2c: slave address 0x00
s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
=============================
WARNING: suspicious RCU usage
5.6.0-rc1-00177-gc9af03c14bfd #7728 Not tainted
-----------------------------
drivers/base/power/wakeup.c:424 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/1452:
#0: edba7270 (sb_writers#7){.+.+}, at: vfs_write+0x16c/0x180
#1: ece71f44 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd0/0x228
#2: eda72008 (kn->count#98){.+.+}, at: kernfs_fop_write+0xd8/0x228
#3: c121223c (system_transition_mutex){+.+.}, at: pm_suspend+0xc0/0x480
#4: c128722c (wakeup_srcu){....}, at:
device_wakeup_disarm_wake_irqs+0x0/0x124
stack backtrace:
CPU: 0 PID: 1452 Comm: rtcwake Not tainted 5.6.0-rc1-00177-gc9af03c14bfd
#7728
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0112710>] (unwind_backtrace) from [<c010e1f4>] (show_stack+0x10/0x14)
[<c010e1f4>] (show_stack) from [<c0b5c50c>] (dump_stack+0xb4/0xe0)
[<c0b5c50c>] (dump_stack) from [<c0625864>]
(device_wakeup_disarm_wake_irqs+0xdc/0x124)
[<c0625864>] (device_wakeup_disarm_wake_irqs) from [<c0620b84>]
(dpm_resume_noirq+0x2b0/0x53c)
[<c0620b84>] (dpm_resume_noirq) from [<c01983c8>]
(suspend_devices_and_enter+0x694/0xc74)
[<c01983c8>] (suspend_devices_and_enter) from [<c0198da0>]
(pm_suspend+0x3f8/0x480)
[<c0198da0>] (pm_suspend) from [<c019696c>] (state_store+0x6c/0xc8)
[<c019696c>] (state_store) from [<c0356c78>] (kernfs_fop_write+0x10c/0x228)
[<c0356c78>] (kernfs_fop_write) from [<c02b52c8>] (__vfs_write+0x30/0x1d0)
[<c02b52c8>] (__vfs_write) from [<c02b8264>] (vfs_write+0xa4/0x180)
[<c02b8264>] (vfs_write) from [<c02b84c0>] (ksys_write+0x60/0xd8)
[<c02b84c0>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xeac89fa8 to 0xeac89ff0)
9fa0: 00000004 0002b440 00000004 0002b440 00000004
00000000
9fc0: 00000004 0002b440 000291b0 00000004 0002b440 00000004 be980bfc
00028160
9fe0: 0000006c be980ac8 b6eae000 b6f0b634
I can help debugging this issue.
> ---
> kernel/rcu/Kconfig.debug | 11 +++--------
> 1 file changed, 3 insertions(+), 8 deletions(-)
>
> diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
> index 4aa02eee8f6c..ec4bb6c09048 100644
> --- a/kernel/rcu/Kconfig.debug
> +++ b/kernel/rcu/Kconfig.debug
> @@ -9,15 +9,10 @@ config PROVE_RCU
> def_bool PROVE_LOCKING
>
> config PROVE_RCU_LIST
> - bool "RCU list lockdep debugging"
> - depends on PROVE_RCU && RCU_EXPERT
> - default n
> + def_bool PROVE_RCU
> help
> - Enable RCU lockdep checking for list usages. By default it is
> - turned off since there are several list RCU users that still
> - need to be converted to pass a lockdep expression. To prevent
> - false-positive splats, we keep it default disabled but once all
> - users are converted, we can remove this config option.
> + Enable RCU lockdep checking for list usages. It is default
> + enabled with CONFIG_PROVE_RCU.
>
> config TORTURE_TEST
> tristate
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Powered by blists - more mailing lists