[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200306222705.13309-2-kevin-ke.li@broadcom.com>
Date: Fri, 6 Mar 2020 14:27:05 -0800
From: Kevin Li <kevin-ke.li@...adcom.com>
To: Mark Brown <broonie@...nel.org>
Cc: Takashi Iwai <tiwai@...e.com>, Liam Girdwood <lgirdwood@...il.com>,
Ray Jui <rjui@...adcom.com>, Jaroslav Kysela <perex@...ex.cz>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com,
Stephen Boyd <swboyd@...omium.org>,
Kuninori Morimoto <kuninori.morimoto.gx@...esas.com>,
alsa-devel@...a-project.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Kevin Li <kevin-ke.li@...adcom.com>
Subject: [PATCH] ASoC: brcm: DSL/PON SoC device tree bindings of audio driver
Signed-off-by: Kevin Li <kevin-ke.li@...adcom.com>
---
.../bindings/sound/brcm,bcm63xx-audio.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100755 Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
diff --git a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
new file mode 100755
index 000000000000..88e404a8145f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible: Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells: 32bit valued, 0 cell.
+- reg: Should contain audio registers location and length
+- interrupts: Should contain the interrupt for the controller.
+- clocks: Must contain an entry for each entry in clock-names.
+ Please refer to clock-bindings.txt.
+- clock-names: Should be one of each entry matching the clocks phandles list:
+ - "i2sclk" (generated clock) Required.
+ - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+ works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+ i2s: bcm63xx-i2s {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63xx-i2s";
+ reg = <0xFF802080 0xFF>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&i2sclk>, <&osc>;
+ clock-names = "i2sclk","i2sosc";
+ };
\ No newline at end of file
--
2.25.1
Powered by blists - more mailing lists