[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200306103857.23962-1-nsaenzjulienne@suse.de>
Date: Fri, 6 Mar 2020 11:38:45 +0100
From: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To: devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-mmc@...r.kernel.org
Cc: adrian.hunter@...el.com, ulf.hansson@...aro.org,
f.fainelli@...il.com, phil@...pberrypi.org,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
linux-kernel@...r.kernel.org
Subject: [PATCH 00/10] Raspberry Pi vmmc regulator support
The series snowballed into adding a new quirk, as I reliased
sdhci-iproc's behaviour is not that uncommon.
Based on Phil Elwell's work in the downstream Raspberry Pi kernel.
---
Nicolas Saenz Julienne (10):
mmc: sdhci: Add quirk SDHCI_QUIRK2_SET_BUS_VOLTAGE
mmc: sdhci: milbeaut: Use quirk instead of custom set_power()
mmc: sdhci: arsan: Use quirk instead of custom set_power()
mmc: sdhci: at-91: Use quirk instead of custom set_power()
mmc: sdhci: pxav3: Use quirk instead of custom set_power()
mmc: sdhci: xenon: Use quirk instead of custom set_power()
mmc: sdhci: am654: Use quirk instead of custom set_power()
mmc: sdhci: Unexport sdhci_set_power_noreg()
mmc: sdhci: iproc: Use SDHCI_QUIRK2_SET_BUS_VOLTAGE on bcm2711
ARM: dts: bcm2711: Add sd_vcc regulator to emmc2
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++
drivers/mmc/host/sdhci-iproc.c | 1 +
drivers/mmc/host/sdhci-milbeaut.c | 15 ++----------
drivers/mmc/host/sdhci-of-arasan.c | 22 +++++------------
drivers/mmc/host/sdhci-of-at91.c | 18 +-------------
drivers/mmc/host/sdhci-pxav3.c | 20 +---------------
drivers/mmc/host/sdhci-xenon.c | 20 +---------------
drivers/mmc/host/sdhci.c | 34 +++++++++++++++------------
drivers/mmc/host/sdhci.h | 4 ++--
drivers/mmc/host/sdhci_am654.c | 23 +++++-------------
10 files changed, 50 insertions(+), 118 deletions(-)
--
2.25.1
Powered by blists - more mailing lists