linux-kernel - [PATCH 10/10] ARM: dts: bcm2711: Add vmmc regulator in emmc2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200306103857.23962-11-nsaenzjulienne@suse.de>
Date:   Fri,  6 Mar 2020 11:38:55 +0100
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
        linux-rpi-kernel@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-mmc@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        f.fainelli@...il.com, phil@...pberrypi.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 10/10] ARM: dts: bcm2711: Add vmmc regulator in emmc2

The SD card power can be controlled trough a pin routed into the board's
external GPIO expander. Turn that into a regulator and provide it to
emmc2.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index e26ea9006378..8e98e917f9f4 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -56,6 +56,16 @@ sd_io_1v8_reg: sd_io_1v8_reg {
 			  3300000 0x0>;
 		status = "okay";
 	};
+
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &firmware {
@@ -174,6 +184,7 @@ brcmf: wifi@1 {
 /* EMMC2 is used to drive the SD card */
 &emmc2 {
 	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
 	broken-cd;
 	status = "okay";
 };
-- 
2.25.1