lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 6 Mar 2020 16:26:03 +0300 From: <Sergey.Semin@...kalelectronics.ru> To: Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>, Rob Herring <robh+dt@...nel.org>, Mark Rutland <mark.rutland@....com> CC: Serge Semin <Sergey.Semin@...kalelectronics.ru>, Serge Semin <fancer.lancer@...il.com>, Maxim Kaurkin <maxim.kaurkin@...kalelectronics.ru>, Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>, Thomas Bogendoerfer <tsbogend@...ha.franken.de>, Paul Burton <paulburton@...nel.org>, Ralf Baechle <ralf@...ux-mips.org>, <linux-hwmon@...r.kernel.org>, <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org> Subject: [PATCH 1/2] dt-bindings: hwmon: Add Baikal-T1 PVT sensor bindings From: Serge Semin <Sergey.Semin@...kalelectronics.ru> Baikal-T1 SoC is equipped with an embedded process, voltage and temperature sensor to monitor the chip internal environment like temperature, supply voltage and transistors performance. This bindings describes the external Baikal-T1 PVT control interfaces like MMIO registers space, interrupt request number and clocks source. These are then used by the corresponding hwmon device driver to implement the sysfs files-based access to the sensors functionality. Signed-off-by: Maxim Kaurkin <maxim.kaurkin@...kalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de> Cc: Paul Burton <paulburton@...nel.org> Cc: Ralf Baechle <ralf@...ux-mips.org> --- .../devicetree/bindings/hwmon/be,bt1-pvt.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/be,bt1-pvt.yaml diff --git a/Documentation/devicetree/bindings/hwmon/be,bt1-pvt.yaml b/Documentation/devicetree/bindings/hwmon/be,bt1-pvt.yaml new file mode 100644 index 000000000000..d575d124d538 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/be,bt1-pvt.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 BAIKAL ELECTRONICS, JSC +# +# Baikal-T1 Process, Voltage, Temperature Sensor Device Tree Bindings. +# +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/be,bt1-pvt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 PVT Sensor Device Tree Bindings + +maintainers: + - Serge Semin <fancer.lancer@...il.com> + +description: | + Baikal-T1 SoC provides an embedded process, voltage and temperature + sensor to monitor an internal SoC environment (chip temperature, supply + voltage and process monitor) and on time detect critical situations, + which may cause the system instability and even damages. The IP-block + is based on the Analog Bits PVT sensor, but is equipped with a dedicated + control wrapper, which provides a MMIO registers-based access to the + sensor core functionality (APB3-bus based) and exposes an additional + functions like thresholds/data ready interrupts, its status and masks, + measurements timeout. Its internal structure is depicted on the next + diagram: + Analog Bits core Bakal-T1 PVT control block + +--------------------+ +------------------------+ + | Temperature sensor |-+ +------| Sensors control | + |--------------------| |<---En---| |------------------------| + | Voltage sensor |-|<--Mode--| +--->| Sampled data | + |--------------------| |<--Trim--+ | |------------------------| + | Low-Vt sensor |-| | +--| Thresholds comparator | + |--------------------| |---Data----| | |------------------------| + | High-Vt sensor |-| | +->| Interrupts status | + |--------------------| |--Valid--+-+ | |------------------------| + | Standard-Vt sensor |-+ +---+--| Interrupts mask | + +--------------------+ |------------------------| + ^ | Interrupts timeout | + | +------------------------+ + | ^ ^ + Rclk-----+----------------------------------------+ | + APB3-------------------------------------------------+ + + This bindings describes the external Baikal-T1 PVT control interfaces + like MMIO registers space, interrupt request number and clocks source. + These are then used by the corresponding hwmon device driver to + implement the sysfs files-based access to the sensors functionality. + +properties: + compatible: + const: be,bt1-pvt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: PVT reference clock. + - description: APB3 interface clock. + + clock-names: + items: + - const: ref + - const: pclk + + "#thermal-sensor-cells": + description: Baikal-T1 can be referenced as the CPU thermal-sensor. + const: 0 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + #include <dt-bindings/clock/bt1-ccu.h> + + pvt: pvt@...00000 { + compatible = "be,bt1-pvt"; + reg = <0x1F200000 0x1000>; + #thermal-sensor-cells = <0>; + + interrupts = <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&ccu_sys CCU_SYS_PVT_CLK>, + <&ccu_sys CCU_SYS_APB_CLK>; + clock-names = "ref", "pclk"; + }; +... -- 2.25.1
Powered by blists - more mailing lists