linux-kernel - [RFC 00/11] ARM: Initial Sunplus Plus1 SP7021 and BPI-F2S support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sun,  8 Mar 2020 17:32:18 +0100
From:   Andreas Färber <afaerber@...e.de>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     Wells Lu 呂芳騰 
        <wells.lu@...plus.com>, Dvorkin Dmitry <dvorkin@...bo.com>,
        linux-kernel@...r.kernel.org,
        Andreas Färber <afaerber@...e.de>,
        devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-serial@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Marc Zyngier <maz@...nel.org>
Subject: [RFC 00/11] ARM: Initial Sunplus Plus1 SP7021 and BPI-F2S support

Hello,

This patch series adds initial drivers and Device Trees for Sunplus Plus1
series (codename Pentagram) SP7021 SoC and Banana Pi BPI-F2S SBC.

First, minimal Kconfig, DT and earlycon driver are prepared to get serial
output at all. Next, interrupt controller and full serial driver are added
that allow to boot into an initrd with interactive serial console.

Device Tree files added are for the CPU-Chip (aka A-Chip) with quad Cortex-A7,
but the file split prepares for also adding the Peripheral-Chip (B-Chip) with
ARM9 later. However, for now this is not reflected in the .dts filename; this
corresponds to the vf610- vs. vf610m4- naming scheme, whereas an alternative
would be to use sp7021-cchip- vs. -pchip- prefix (as sp7021-cpu- looks weird).
It is assumed we can reuse the same SoC and board bindings for CA7 and ARM9
and only differ for IP blocks where needed.

My inquiry to Sunplus about their GIC (anticipating complaints from Marc)
remained unanswered, so I've added the two extra regions and irq myself,
without being able to test KVM due to BSP U-Boot not booting in HYP mode.
According to Sunplus the mode can be changed in U-Boot (but where/how?).

Similarly, the architectural timer is not properly initialized in BSP U-Boot,
so that I currently have a mach- hack in my tree below. Unlike RTD1195,
we do have U-Boot sources (v2019.04 based), so should be able to fix this
in the bootloader rather than in the kernel, thus not included as patch here.

Based on SoC online manual [1] and downstream BPI-F2S BSP tree [2] as well as
my previous Actions serial and Realtek irqchip drivers and DTs.

More details at:
https://en.opensuse.org/HCL:BananaPi_F2S

Latest experimental patches at:
https://github.com/afaerber/linux/commits/f2s-next

Have a lot of fun!

Cheers,
Andreas

[1] https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/470450252/SP7021+Technical+Manual
[2] https://github.com/BPI-SINOVOIP/BPI-F2S-bsp

Cc: devicetree@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-serial@...r.kernel.org
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Jason Cooper <jason@...edaemon.net>
Cc: Marc Zyngier <maz@...nel.org>
Cc: Wells Lu 呂芳騰 <wells.lu@...plus.com>
Cc: Dvorkin Dmitry <dvorkin@...bo.com>

Andreas Färber (11):
  dt-bindings: vendor-prefixes: Add Sunplus
  dt-bindings: arm: Add Sunplus SP7021 and Banana Pi BPI-F2S
  ARM: Prepare Sunplus Plus1 SoC family
  dt-bindings: interrupt-controller: Add Sunplus SP7021 mux
  dt-bindings: serial: Add Sunplus SP7021 UART
  tty: serial: Add Sunplus Plus1 UART earlycon
  ARM: dts: Add Sunplus Plus1 SP7021 and Banana Pi F2S
  tty: serial: sunplus: Implement full UART driver
  irqchip: Add Sunplus SP7021 interrupt (mux) controller
  ARM: dts: sp7021-cpu: Add interrupt controller node
  ARM: dts: sp7021-cpu: Add dummy UART0 clock and interrupt

 Documentation/devicetree/bindings/arm/sunplus.yaml |  22 +
 .../sunplus,pentagram-intc.yaml                    |  50 ++
 .../bindings/serial/sunplus,pentagram-uart.yaml    |  24 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm/Kconfig                                   |   2 +
 arch/arm/Makefile                                  |   1 +
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/pentagram-sp7021-bpi-f2s.dts     |  29 +
 arch/arm/boot/dts/pentagram-sp7021-cpu.dtsi        |  93 +++
 arch/arm/boot/dts/pentagram-sp7021.dtsi            |  61 ++
 arch/arm/mach-sunplus/Kconfig                      |  10 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-sp7021.c                       | 285 ++++++++
 drivers/tty/serial/Kconfig                         |  19 +
 drivers/tty/serial/Makefile                        |   1 +
 drivers/tty/serial/sunplus-uart.c                  | 770 +++++++++++++++++++++
 include/uapi/linux/serial_core.h                   |   3 +
 17 files changed, 1375 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sunplus.yaml
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sunplus,pentagram-intc.yaml
 create mode 100644 Documentation/devicetree/bindings/serial/sunplus,pentagram-uart.yaml
 create mode 100644 arch/arm/boot/dts/pentagram-sp7021-bpi-f2s.dts
 create mode 100644 arch/arm/boot/dts/pentagram-sp7021-cpu.dtsi
 create mode 100644 arch/arm/boot/dts/pentagram-sp7021.dtsi
 create mode 100644 arch/arm/mach-sunplus/Kconfig
 create mode 100644 drivers/irqchip/irq-sp7021.c
 create mode 100644 drivers/tty/serial/sunplus-uart.c

-- 
2.16.4