| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200309141422.10999-2-alexandru.tachici@analog.com>
Date: Mon, 9 Mar 2020 16:14:21 +0200
From: Alexandru Tachici <alexandru.tachici@...log.com>
To: <linux-hwmon@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <linux@...ck-us.net>,
Alexandru Tachici <alexandru.tachici@...log.com>
Subject: [PATCH 1/2] hwmon: pmbus: adm1266: add initial support
Add initial pmbus probing driver for the adm1266 Cascadable
Super Sequencer with Margin Control and Fault Recording.
Driver is currently using the pmbus_core, creating sysfs
files under hwmon for inputs: vh1->vh4 and vp1->vp13.
Signed-off-by: Alexandru Tachici <alexandru.tachici@...log.com>
---
Documentation/hwmon/adm1266 | 34 ++++++++
drivers/hwmon/pmbus/Kconfig | 10 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adm1266.c | 146 ++++++++++++++++++++++++++++++++++
4 files changed, 191 insertions(+)
create mode 100644 Documentation/hwmon/adm1266
create mode 100644 drivers/hwmon/pmbus/adm1266.c
diff --git a/Documentation/hwmon/adm1266 b/Documentation/hwmon/adm1266
new file mode 100644
index 000000000000..64651b5086a7
--- /dev/null
+++ b/Documentation/hwmon/adm1266
@@ -0,0 +1,34 @@
+Kernel driver adm1266
+=====================
+
+Supported chips:
+ * Analog Devices ADM1266
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@...log.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that feature voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label "voutx"
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a9ea06204767..153e64febe98 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -26,6 +26,16 @@ config SENSORS_PMBUS
This driver can also be built as a module. If so, the module will
be called pmbus.
+config SENSORS_ADM1266
+ tristate "Analog Devices ADM1266"
+ default n
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1266.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1266.
+
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 5feb45806123..ed38f6d6f845 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000000..3aa8262f9bd6
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/fwnode.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "pmbus.h"
+
+enum chips { adm1266 };
+
+struct adm1266_data {
+ enum chips id;
+ struct pmbus_driver_info info;
+};
+
+static int adm1266_block_wr(struct i2c_client *client, u8 cmd, u8 wr_len,
+ u8 *data_w, u8 *data_r)
+{
+ union i2c_smbus_data smbus_data;
+ int ret;
+
+ smbus_data.block[0] = wr_len;
+ memcpy(smbus_data.block + 1, data_w, wr_len);
+ ret = i2c_smbus_xfer(client->adapter, client->addr,
+ client->flags, I2C_SMBUS_READ, cmd,
+ I2C_SMBUS_BLOCK_PROC_CALL, &smbus_data);
+ if (ret < 0)
+ return ret;
+
+ memcpy(data_r, &smbus_data.block[1], smbus_data.block[0]);
+
+ return 0;
+}
+
+static int adm1266_config(struct pmbus_driver_info *info)
+{
+ u32 funcs;
+ int i;
+
+ info->pages = 17;
+ info->format[PSC_VOLTAGE_OUT] = linear;
+
+ funcs = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ for (i = 0; i < info->pages; i++)
+ info->func[i] = funcs;
+
+ return 0;
+}
+
+static const struct i2c_device_id adm1266_id[] = {
+ { "adm1266", adm1266 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static int adm1266_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ u8 wr_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+ struct adm1266_data *data;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ wr_buffer[0] = 32;
+ ret = adm1266_block_wr(client, PMBUS_MFR_ID, 1, wr_buffer,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+ return ret;
+ }
+
+ if (strncmp(block_buffer, "Analog Devices, Inc", 19)) {
+ dev_err(&client->dev, "Unsupported Manufacturer ID\n");
+ return -ENODEV;
+ }
+
+ wr_buffer[0] = 32;
+ ret = adm1266_block_wr(client, PMBUS_MFR_MODEL, 1, wr_buffer,
+ block_buffer);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+ return ret;
+ }
+
+ for (mid = adm1266_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ data->id = mid->driver_data;
+
+ ret = adm1266_config(&data->info);
+ if (ret < 0) {
+ dev_err(&client->dev, "Could not configure device.");
+ return ret;
+ }
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+ { .compatible = "adi,adm1266" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static struct i2c_driver adm1266_driver = {
+ .driver = {
+ .name = "adm1266",
+ .of_match_table = adm1266_of_match,
+ },
+ .probe = adm1266_probe,
+ .remove = pmbus_do_remove,
+ .id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@...log.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
--
2.20.1
Powered by blists - more mailing lists