[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b8456cc6-7aad-b5d1-dcd7-06692f340419@arm.com>
Date: Mon, 9 Mar 2020 16:37:53 +0000
From: Cristian Marussi <cristian.marussi@....com>
To: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
sudeep.holla@....com, lukasz.luba@....com,
james.quinlan@...adcom.com
Subject: Re: [PATCH v4 07/13] firmware: arm_scmi: Add notification dispatch
and delivery
Hi
On 09/03/2020 12:26, Jonathan Cameron wrote:
> On Wed, 4 Mar 2020 16:25:52 +0000
> Cristian Marussi <cristian.marussi@....com> wrote:
>
>> Add core SCMI Notifications dispatch and delivery support logic which is
>> able, at first, to dispatch well-known received events from the RX ISR to
>> the dedicated deferred worker, and then, from there, to final deliver the
>> events to the registered users' callbacks.
>>
>> Dispatch and delivery is just added here, still not enabled.
>>
>> Signed-off-by: Cristian Marussi <cristian.marussi@....com>
>
> Hmm. Doing that magic in_flight stuff looks fine, but it feels like
> the wrong way to approach a problem which is down to the lack of
> atomicity of the kfifo_in pair. Could we just make that atomic via
> a bit of custom manipulation of the kfifo?
>
> The snag is that stuff isn't exported from the innards of kfifo...
My initial approach till v3 was to collate header and payload in a pre-allocated
scratch buffer and then doing a single kfifo_in so as to avoid to worry about workqueue
empting the kfifo and going to sleep right after a header has been read and a payload is
in flight, but that, as pointed out indirectly by Jim Quinlan led to an unneeded memcpy...
in fact I was copying in/out the fifo a total of 2*h + 3*p bytes, instead with this handling
I can avoid such intermediate collation step and stick to the bare minimum needed 2*h + 2*p
bytes memcopies.
On one side I was worried to make the code complex to avoid just a few bytes of memcpy, on the other
side the redundant memcpy is on the ISR side and also I cannot assume that the unneded p bytes
copied there are necessarily small ... being SMCI extensible you could possibly add a proprietary
(or not) protocol with jumbo payloads of KBs so that the p-bytes redundant copy is no more so
negligible.
At the end I did not find so horrible and complex the new in flight handling (tested introducing
horrible mdelays in between the kfifo_inS inside the ISR...), so I went for that.
>
> Maybe what you have here is the best option.
>
I like the solution you propose down below, but the fact that it relies on the inner kfifo function
is in fact a show stopper being based on the inernal api (and I have not found other viable ways to
abuse the kfifo API :D ... as of now)...I wonder if it is not worth propose upstream (not in this series)
a generic kfifo "light" scatter/gather in/out interface for this particular usecase; _kfifo_dma* seem to use
the full fledged scatter/gather kernel structs, but that's certainly overkill for this scenario.
Thanks
Cristian
> Jonathan
>
>> ---
>> V3 --> V4
>> - dispatcher now handles dequeuing of events in chunks (header+payload):
>> handling of these in_flight events let us remove one unneeded memcpy
>> on RX interrupt path (scmi_notify)
>> - deferred dispatcher now access their own per-protocol handlers' table
>> reducing locking contention on the RX path
>> V2 --> V3
>> - exposing wq in sysfs via WQ_SYSFS
>> V1 --> V2
>> - splitted out of V1 patch 04
>> - moved from IDR maps to real HashTables to store event_handlers
>> - simplified delivery logic
>> ---
>> drivers/firmware/arm_scmi/notify.c | 334 ++++++++++++++++++++++++++++-
>> drivers/firmware/arm_scmi/notify.h | 9 +
>> 2 files changed, 342 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
>> index d6c08cce3c63..0854d48d5886 100644
>> --- a/drivers/firmware/arm_scmi/notify.c
>> +++ b/drivers/firmware/arm_scmi/notify.c
>> @@ -44,6 +44,27 @@
>> * as described in the SCMI Protocol specification, while src_id represents an
>> * optional, protocol dependent, source identifier (like domain_id, perf_id
>> * or sensor_id and so forth).
>> + *
>> + * Upon reception of a notification message from the platform the SCMI RX ISR
[snip]
>> + if (unlikely(len > r_evt->evt->max_payld_sz)) {
>> + pr_err("SCMI Notifications: discard badly sized message\n");
>> + return -EINVAL;
>> + }
>> + if (unlikely(kfifo_avail(&r_evt->proto->equeue.kfifo) <
>> + sizeof(eh) + len)) {
>> + pr_warn("SCMI Notifications: queue full dropping proto_id:%d evt_id:%d ts:%lld\n",
>> + proto_id, evt_id, ts);
>> + return -ENOMEM;
>> + }
>> +
>> + eh.timestamp = ts;
>> + eh.evt_id = evt_id;
>> + eh.payld_sz = len;
>> + kfifo_in(&r_evt->proto->equeue.kfifo, &eh, sizeof(eh));
>
> I'd add a comment that this potential race here is the reason (I think) for all
> the inflight handling above.
>
> Either that or create a kfifo_in_pair_unsafe that just makes these atomic by only
> updating the kfifo->in point after adding both parts.
>
> It will be as simple as (I think, kfifo magic always give me a headache).
> {
> struct __kfifo *__kfifo = &kfifo->kfifo;
> kfifo_copy_in(fifo, &eh, sizeof(eh), fifo->in);
> kfifo_copy_in(fifo, &buf, len, fifo->in + sizeof(eh));
> fifo->in += len + sizeof(eh);
> }
>
> It's unsafe because crazy things will happen if there isn't enough room, but you
> can't get there in this code because of the check above and we are making
> horrendous assumptions about the kfifo type.
>
As said above.
>> + kfifo_in(&r_evt->proto->equeue.kfifo, buf, len);
>> + queue_work(r_evt->proto->equeue.wq,
>> + &r_evt->proto->equeue.notify_work);
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * scmi_initialize_events_queue - Allocate/Initialize a kfifo buffer
>> *
>> @@ -332,12 +604,21 @@ static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
>> static int scmi_initialize_events_queue(struct scmi_notify_instance *ni,
>> struct events_queue *equeue, size_t sz)
>> {
>> + int ret = 0;
>
> ret looks to be always initialized below.
>
Right.
>> +
>> equeue->qbuf = devm_kzalloc(ni->handle->dev, sz, GFP_KERNEL);
>> if (!equeue->qbuf)
>> return -ENOMEM;
>> equeue->sz = sz;
>>
>> - return kfifo_init(&equeue->kfifo, equeue->qbuf, equeue->sz);
>> + ret = kfifo_init(&equeue->kfifo, equeue->qbuf, equeue->sz);
>> + if (ret)
>> + return ret;
>> +
>> + INIT_WORK(&equeue->notify_work, scmi_events_dispatcher);
>> + equeue->wq = ni->notify_wq;
>> +
>> + return ret;
>> }
>>
>> /**
>> @@ -740,6 +1021,38 @@ scmi_get_or_create_handler(struct scmi_notify_instance *ni, u32 evt_key)
>> return __scmi_event_handler_get_ops(ni, evt_key, true);
>> }
>>
>> +/**
>> + * scmi_get_active_handler - Helper to get active handlers only
>> + *
>> + * Search for the desired handler matching the key only in the per-protocol
>> + * table of registered handlers: this is called only from the dispatching path
>> + * so want to be as quick as possible and do not care about pending.
>> + *
>> + * @ni: A reference to the notification instance to use
>> + * @evt_key: The event key to use
>> + *
>> + * Return: A properly refcounted active handler
>> + */
>> +static struct scmi_event_handler *
>> +scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key)
>> +{
>> + struct scmi_registered_event *r_evt;
>> + struct scmi_event_handler *hndl = NULL;
>> +
>> + r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key),
>> + KEY_XTRACT_EVT_ID(evt_key));
>> + if (likely(r_evt)) {
>> + mutex_lock(&r_evt->proto->registered_mtx);
>> + hndl = KEY_FIND(r_evt->proto->registered_events_handlers,
>> + hndl, evt_key);
>> + if (likely(hndl))
>> + refcount_inc(&hndl->users);
>> + mutex_unlock(&r_evt->proto->registered_mtx);
>> + }
>> +
>> + return hndl;
>> +}
>> +
>> /**
>> * __scmi_enable_evt - Enable/disable events generation
>> *
>> @@ -861,6 +1174,16 @@ static void scmi_put_handler(struct scmi_notify_instance *ni,
>> mutex_unlock(&ni->pending_mtx);
>> }
>>
>> +static void scmi_put_active_handler(struct scmi_notify_instance *ni,
>> + struct scmi_event_handler *hndl)
>> +{
>> + struct scmi_registered_event *r_evt = hndl->r_evt;
>> +
>> + mutex_lock(&r_evt->proto->registered_mtx);
>> + scmi_put_handler_unlocked(ni, hndl);
>> + mutex_unlock(&r_evt->proto->registered_mtx);
>> +}
>> +
>> /**
>> * scmi_event_handler_enable_events - Enable events associated to an handler
>> *
>> @@ -1087,6 +1410,12 @@ int scmi_notification_init(struct scmi_handle *handle)
>> ni->gid = gid;
>> ni->handle = handle;
>>
>> + ni->notify_wq = alloc_workqueue("scmi_notify",
>> + WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS,
>> + 0);
>> + if (!ni->notify_wq)
>> + goto err;
>> +
>> ni->registered_protocols = devm_kcalloc(handle->dev, SCMI_MAX_PROTO,
>> sizeof(char *), GFP_KERNEL);
>> if (!ni->registered_protocols)
>> @@ -1133,6 +1462,9 @@ void scmi_notification_exit(struct scmi_handle *handle)
>> /* Ensure atomic values are updated */
>> smp_mb__after_atomic();
>>
>> + /* Destroy while letting pending work complete */
>> + destroy_workqueue(ni->notify_wq);
>> +
>> devres_release_group(ni->handle->dev, ni->gid);
>>
>> pr_info("SCMI Notifications Core Shutdown.\n");
>> diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
>> index f765acda2311..6cd386649d5a 100644
>> --- a/drivers/firmware/arm_scmi/notify.h
>> +++ b/drivers/firmware/arm_scmi/notify.h
>> @@ -51,10 +51,17 @@ struct scmi_event {
>> * using the proper custom protocol commands.
>> * Return true if at least one the required src_id
>> * has been successfully enabled/disabled
>> + * @fill_custom_report: fills a custom event report from the provided
>> + * event message payld identifying the event
>> + * specific src_id.
>> + * Return NULL on failure otherwise @report now fully
>> + * populated
>> */
>> struct scmi_protocol_event_ops {
>> bool (*set_notify_enabled)(const struct scmi_handle *handle,
>> u8 evt_id, u32 src_id, bool enabled);
>> + void *(*fill_custom_report)(u8 evt_id, u64 timestamp, const void *payld,
>> + size_t payld_sz, void *report, u32 *src_id);
>> };
>>
>> int scmi_notification_init(struct scmi_handle *handle);
>> @@ -65,5 +72,7 @@ int scmi_register_protocol_events(const struct scmi_handle *handle,
>> const struct scmi_protocol_event_ops *ops,
>> const struct scmi_event *evt, int num_events,
>> int num_sources);
>> +int scmi_notify(const struct scmi_handle *handle, u8 proto_id, u8 evt_id,
>> + const void *buf, size_t len, u64 ts);
>>
>> #endif /* _SCMI_NOTIFY_H */
>
>
Powered by blists - more mailing lists