| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200310134603.30260-3-robert.foss@linaro.org>
Date: Tue, 10 Mar 2020 14:46:02 +0100
From: Robert Foss <robert.foss@...aro.org>
To: ben.kao@...el.com, mchehab@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, matthias.bgg@...il.com, davem@...emloft.net,
gregkh@...uxfoundation.org, Jonathan.Cameron@...wei.com,
andriy.shevchenko@...ux.intel.com, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Dongchun Zhu <dongchun.zhu@...iatek.com>
Cc: Tomasz Figa <tfiga@...omium.org>,
Robert Foss <robert.foss@...aro.org>
Subject: [v1 2/3] media: ov8856: Add devicetree support
Add devicetree match table, and enable ov8856_probe()
to initialize power, clocks and reset pins.
Signed-off-by: Robert Foss <robert.foss@...aro.org>
---
drivers/media/i2c/ov8856.c | 105 ++++++++++++++++++++++++++++++++++++-
1 file changed, 103 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 8655842af275..1769acdfaa44 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -3,10 +3,13 @@
#include <asm/unaligned.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
@@ -19,6 +22,8 @@
#define OV8856_LINK_FREQ_180MHZ 180000000ULL
#define OV8856_SCLK 144000000ULL
#define OV8856_MCLK 19200000
+#define OV8856_XVCLK_19_2 19200000
+#define OV8856_XVCLK_24 24000000
#define OV8856_DATA_LANES 4
#define OV8856_RGB_DEPTH 10
@@ -64,6 +69,14 @@
#define to_ov8856(_sd) container_of(_sd, struct ov8856, sd)
+static const char * const ov8856_supply_names[] = {
+ "dovdd", /* Digital I/O power */
+ "avdd", /* Analog power */
+ "dvdd", /* Digital core power */
+};
+
+#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
+
enum {
OV8856_LINK_FREQ_720MBPS,
OV8856_LINK_FREQ_360MBPS,
@@ -566,6 +579,10 @@ struct ov8856 {
struct media_pad pad;
struct v4l2_ctrl_handler ctrl_handler;
+ struct clk *xvclk;
+ struct gpio_desc *n_shutdn_gpio;
+ struct regulator_bulk_data supplies[OV8856_NUM_SUPPLIES];
+
/* V4L2 Controls */
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
@@ -908,6 +925,45 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
}
+static int __ov8856_power_on(struct ov8856 *ov8856)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
+ int ret;
+
+ ret = clk_prepare_enable(ov8856->xvclk);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to enable xvclk\n");
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
+
+ ret = regulator_bulk_enable(OV8856_NUM_SUPPLIES, ov8856->supplies);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to enable regulators\n");
+ goto disable_clk;
+ }
+
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
+
+ usleep_range(1500, 1800);
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(ov8856->xvclk);
+
+ return ret;
+}
+
+static void __ov8856_power_off(struct ov8856 *ov8856)
+{
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
+ regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
+ clk_disable_unprepare(ov8856->xvclk);
+}
+
+
static int __maybe_unused ov8856_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -1175,7 +1231,7 @@ static int ov8856_remove(struct i2c_client *client)
static int ov8856_probe(struct i2c_client *client)
{
struct ov8856 *ov8856;
- int ret;
+ int i, ret;
ret = ov8856_check_hwcfg(&client->dev);
if (ret) {
@@ -1189,10 +1245,45 @@ static int ov8856_probe(struct i2c_client *client)
return -ENOMEM;
v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
+ ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov8856->xvclk)) {
+ dev_err(&client->dev, "failed to get xvclk\n");
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(ov8856->xvclk, OV8856_XVCLK_24);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to set xvclk rate (24MHz)\n");
+ return ret;
+ }
+
+ ov8856->n_shutdn_gpio = devm_gpiod_get(&client->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ov8856->n_shutdn_gpio)) {
+ dev_err(&client->dev, "failed to get reset-gpios\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < OV8856_NUM_SUPPLIES; i++)
+ ov8856->supplies[i].supply = ov8856_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, OV8856_NUM_SUPPLIES,
+ ov8856->supplies);
+ if (ret) {
+ dev_warn(&client->dev, "failed to get regulators\n");
+ return ret;
+ }
+
+ ret = __ov8856_power_on(ov8856);
+ if (ret) {
+ dev_warn(&client->dev, "failed to power on\n");
+ return ret;
+ }
+
ret = ov8856_identify_module(ov8856);
if (ret) {
dev_err(&client->dev, "failed to find sensor: %d", ret);
- return ret;
+ goto probe_power_off;
}
mutex_init(&ov8856->mutex);
@@ -1238,6 +1329,9 @@ static int ov8856_probe(struct i2c_client *client)
v4l2_ctrl_handler_free(ov8856->sd.ctrl_handler);
mutex_destroy(&ov8856->mutex);
+probe_power_off:
+ __ov8856_power_off(ov8856);
+
return ret;
}
@@ -1254,11 +1348,18 @@ static const struct acpi_device_id ov8856_acpi_ids[] = {
MODULE_DEVICE_TABLE(acpi, ov8856_acpi_ids);
#endif
+static const struct of_device_id ov8856_of_match[] = {
+ { .compatible = "ovti,ov8856" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ov8856_of_match);
+
static struct i2c_driver ov8856_i2c_driver = {
.driver = {
.name = "ov8856",
.pm = &ov8856_pm_ops,
.acpi_match_table = ACPI_PTR(ov8856_acpi_ids),
+ .of_match_table = ov8856_of_match,
},
.probe_new = ov8856_probe,
.remove = ov8856_remove,
--
2.20.1
Powered by blists - more mailing lists