lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:   Tue, 10 Mar 2020 03:20:22 +0300
From:   Sergey Semin <Sergey.Semin@...kalelectronics.ru>
To:     Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>,
        Maxim Kaurkin <Maxim.Kaurkin@...kalelectronics.ru>,
        Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>,
        Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>,
        Ekaterina Skachko <Ekaterina.Skachko@...kalelectronics.ru>,
        Vadim Vlasov <V.Vlasov@...kalelectronics.ru>,
        Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Paul Burton <paul.burton@...tec.com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/4] clocksource: Fix MIPS GIC and DW APB Timer for
 Baikal-T1 SoC support

On Fri, Mar 06, 2020 at 03:56:00PM +0300, Sergey.Semin@...kalelectronics.ru wrote:
> From: Serge Semin <fancer.lancer@...il.com>
> 
> Aside from MIPS-specific r4k timer Baikal-T1 chip also provides a functionality
> of two another timers: embedded into the MIPS GIC timer and three external DW
> timers available over APB bus. But we can't use them before the corresponding
> drivers are properly fixed. First of all DW APB Timer shouldn't be bound to a
> single CPU, since as being accessible over APB they are external with respect
> to all possible CPUs. Secondly there might be more than just two DW APB Timers
> in the system (Baikal-T1 has three of them), so permit the driver to use one of
> them as a clocksource and the rest - for clockevents. Thirdly it's possible to
> use MIPS GIC timer as a clocksource so register it in the corresponding
> subsystem (the patch has been found in the Paul Burton MIPS repo so I left the
> original Signed-off-by attribute). Finally in the same way as r4k timer the
> MIPS GIC timer should be used with care when CPUFREQ config is enabled since in
> case of CM2 the timer counting depends on the CPU reference clock frequency
> while the clocksource subsystem currently doesn't support the timers with
> non-stable clock.
> 
> This patchset is rebased and tested on the mainline Linux kernel 5.6-rc4:
> commit 98d54f81e36b ("Linux 5.6-rc4").
> 
> Signed-off-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> Signed-off-by: Alexey Malahov <Alexey.Malahov@...kalelectronics.ru>
> Cc: Maxim Kaurkin <Maxim.Kaurkin@...kalelectronics.ru>
> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@...kalelectronics.ru>
> Cc: Ramil Zaripov <Ramil.Zaripov@...kalelectronics.ru>
> Cc: Ekaterina Skachko <Ekaterina.Skachko@...kalelectronics.ru>
> Cc: Vadim Vlasov <V.Vlasov@...kalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
> Cc: Paul Burton <paul.burton@...tec.com>
> Cc: Ralf Baechle <ralf@...ux-mips.org>
> Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
> Cc: Thomas Gleixner <tglx@...utronix.de>
> Cc: linux-kernel@...r.kernel.org
> 
> Paul Burton (1):
>   clocksource: mips-gic-timer: Register as sched_clock
> 
> Serge Semin (3):
>   clocksource: dw_apb_timer: Set clockevent any-possible-CPU mask
>   clocksource: dw_apb_timer_of: Fix missing clockevent timers
>   clocksource: mips-gic-timer: Set limitations on
>     clocksource/sched-clocks usage
> 
>  drivers/clocksource/dw_apb_timer.c    | 18 +++++++---------
>  drivers/clocksource/dw_apb_timer_of.c |  9 +++-----
>  drivers/clocksource/mips-gic-timer.c  | 30 ++++++++++++++++++++++-----
>  include/linux/dw_apb_timer.h          |  2 +-
>  4 files changed, 36 insertions(+), 23 deletions(-)
> 
> -- 
> 2.25.1
> 

Folks,

It appears our corporate email server changes the Message-Id field of
messages passing through it. Due to that the emails threading gets to be
broken. I'll resubmit the properly structured patchset as soon as our system
administrator fixes the problem. Sorry for the inconvenience cause by it.

Regards,
-Sergey

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ