| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.DEB.2.21.2003101554530.26409@hadrien>
Date: Tue, 10 Mar 2020 15:57:15 +0100 (CET)
From: Julia Lawall <julia.lawall@...ia.fr>
To: Shreeya Patel <shreeya.patel23498@...il.com>
cc: Larry.Finger@...inger.net, gregkh@...uxfoundation.org,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
outreachy-kernel@...glegroups.com, sbrivio@...hat.com,
daniel.baluta@...il.com, nramas@...ux.microsoft.com,
hverkuil@...all.nl
Subject: Re: [Outreachy kernel] [PATCH v2] Staging: rtl8188eu: rtw_mlme: Add
space around operators
On Tue, 10 Mar 2020, Shreeya Patel wrote:
> Add space around operators for improving the code
> readability.
>
> Reported by checkpatch.pl
>
> Signed-off-by: Shreeya Patel <shreeya.patel23498@...il.com>
> ---
>
> rtw_mlme_old.o - Previously produced object file before making any
> changes to the source code.
> rtw_mlme.o - Object file produced after compiling the changes done in source
> file.
>
> Following is the output of diff between the previously produced object
> file and the object file produced after compiling the changes.
>
> shreeya@...eeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/core$ diff rtw_mlme_old.o rtw_mlme.o
> shreeya@...eeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/core$
>
> Following output shows that there was no other change in the source
> code except for whitespace.
>
> shreeya@...eeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/core/
> shreeya@...eeya-Patel:~git/kernels/staging$
If this information is importamt, it should be above the line. On the
other hand, it is much too detailed, making it hard to figure out what is
being said. It would be better to just say diff of the .o files before
and after the changes shows no difference. Likewise git diff -w shows no
difference. That way one can quickly see what tests you did, without
being distracted by the machine name, the directory name, etc.
julia
>
> Changes in v2
> - Include the file name in Subject to make it more specific.
> - Add the output of diff between the previously produced object
> file and the object file produced after compiling the changes.
> - Add the output of git diff -w to show no changes in source file
> except for whitespace.
>
>
> drivers/staging/rtl8188eu/core/rtw_mlme.c | 40 +++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme.c b/drivers/staging/rtl8188eu/core/rtw_mlme.c
> index 8da955e8343b..9de2d421f6b1 100644
> --- a/drivers/staging/rtl8188eu/core/rtw_mlme.c
> +++ b/drivers/staging/rtl8188eu/core/rtw_mlme.c
> @@ -149,7 +149,7 @@ static void _rtw_free_network(struct mlme_priv *pmlmepriv, struct wlan_network *
> (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE)))
> lifetime = 1;
> if (!isfreeall) {
> - delta_time = (curr_time - pnetwork->last_scanned)/HZ;
> + delta_time = (curr_time - pnetwork->last_scanned) / HZ;
> if (delta_time < lifetime)/* unit:sec */
> return;
> }
> @@ -249,8 +249,8 @@ void rtw_generate_random_ibss(u8 *pibss)
> pibss[1] = 0x11;
> pibss[2] = 0x87;
> pibss[3] = (u8)(curtime & 0xff);/* p[0]; */
> - pibss[4] = (u8)((curtime>>8) & 0xff);/* p[1]; */
> - pibss[5] = (u8)((curtime>>16) & 0xff);/* p[2]; */
> + pibss[4] = (u8)((curtime >> 8) & 0xff);/* p[1]; */
> + pibss[5] = (u8)((curtime >> 16) & 0xff);/* p[2]; */
> }
>
> u8 *rtw_get_capability_from_ie(u8 *ie)
> @@ -357,9 +357,9 @@ void update_network(struct wlan_bssid_ex *dst, struct wlan_bssid_ex *src,
> rssi_final = rssi_ori;
> } else {
> if (sq_smp != 101) { /* from the right channel */
> - ss_final = ((u32)(src->PhyInfo.SignalStrength)+(u32)(dst->PhyInfo.SignalStrength)*4)/5;
> - sq_final = ((u32)(src->PhyInfo.SignalQuality)+(u32)(dst->PhyInfo.SignalQuality)*4)/5;
> - rssi_final = (src->Rssi+dst->Rssi*4)/5;
> + ss_final = ((u32)(src->PhyInfo.SignalStrength) + (u32)(dst->PhyInfo.SignalStrength) * 4) / 5;
> + sq_final = ((u32)(src->PhyInfo.SignalQuality) + (u32)(dst->PhyInfo.SignalQuality) * 4) / 5;
> + rssi_final = (src->Rssi + dst->Rssi * 4) / 5;
> } else {
> /* bss info not receiving from the right channel, use the original RX signal infos */
> ss_final = dst->PhyInfo.SignalStrength;
> @@ -510,7 +510,7 @@ static int rtw_is_desired_network(struct adapter *adapter, struct wlan_network *
> privacy = pnetwork->network.Privacy;
>
> if (check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) {
> - if (rtw_get_wps_ie(pnetwork->network.ies+_FIXED_IE_LENGTH_, pnetwork->network.ie_length-_FIXED_IE_LENGTH_, NULL, &wps_ielen))
> + if (rtw_get_wps_ie(pnetwork->network.ies + _FIXED_IE_LENGTH_, pnetwork->network.ie_length - _FIXED_IE_LENGTH_, NULL, &wps_ielen))
> return true;
> else
> return false;
> @@ -925,7 +925,7 @@ static void rtw_joinbss_update_network(struct adapter *padapter, struct wlan_net
> switch (pnetwork->network.InfrastructureMode) {
> case Ndis802_11Infrastructure:
> if (pmlmepriv->fw_state & WIFI_UNDER_WPS)
> - pmlmepriv->fw_state = WIFI_STATION_STATE|WIFI_UNDER_WPS;
> + pmlmepriv->fw_state = WIFI_STATION_STATE | WIFI_UNDER_WPS;
> else
> pmlmepriv->fw_state = WIFI_STATION_STATE;
> break;
> @@ -1097,14 +1097,14 @@ static u8 search_max_mac_id(struct adapter *padapter)
> #if defined(CONFIG_88EU_AP_MODE)
> if (check_fwstate(pmlmepriv, WIFI_AP_STATE)) {
> for (aid = pstapriv->max_num_sta; aid > 0; aid--) {
> - if (pstapriv->sta_aid[aid-1])
> + if (pstapriv->sta_aid[aid - 1])
> break;
> }
> mac_id = aid + 1;
> } else
> #endif
> {/* adhoc id = 31~2 */
> - for (mac_id = NUM_STA-1; mac_id >= IBSS_START_MAC_ID; mac_id--) {
> + for (mac_id = NUM_STA - 1; mac_id >= IBSS_START_MAC_ID; mac_id--) {
> if (pmlmeinfo->FW_sta_info[mac_id].status == 1)
> break;
> }
> @@ -1123,7 +1123,7 @@ void rtw_stassoc_hw_rpt(struct adapter *adapter, struct sta_info *psta)
>
> macid = search_max_mac_id(adapter);
> rtw_hal_set_hwreg(adapter, HW_VAR_TX_RPT_MAX_MACID, (u8 *)&macid);
> - media_status = (psta->mac_id<<8)|1; /* MACID|OPMODE:1 connect */
> + media_status = (psta->mac_id << 8) | 1; /* MACID|OPMODE:1 connect */
> rtw_hal_set_hwreg(adapter, HW_VAR_H2C_MEDIA_STATUS_RPT, (u8 *)&media_status);
> }
>
> @@ -1213,7 +1213,7 @@ void rtw_stadel_event_callback(struct adapter *adapter, u8 *pbuf)
> if (mac_id >= 0) {
> u16 media_status;
>
> - media_status = (mac_id<<8)|0; /* MACID|OPMODE:0 means disconnect */
> + media_status = (mac_id << 8) | 0; /* MACID|OPMODE:0 means disconnect */
> /* for STA, AP, ADHOC mode, report disconnect stauts to FW */
> rtw_hal_set_hwreg(adapter, HW_VAR_H2C_MEDIA_STATUS_RPT, (u8 *)&media_status);
> }
> @@ -1640,7 +1640,7 @@ int rtw_restruct_wmm_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_
> for (i = 12; i < in_len; i += (in_ie[i + 1] + 2) /* to the next IE element */) {
> ielength = initial_out_len;
>
> - if (in_ie[i] == 0xDD && in_ie[i+2] == 0x00 && in_ie[i+3] == 0x50 && in_ie[i+4] == 0xF2 && in_ie[i+5] == 0x02 && i+5 < in_len) {
> + if (in_ie[i] == 0xDD && in_ie[i + 2] == 0x00 && in_ie[i + 3] == 0x50 && in_ie[i + 4] == 0xF2 && in_ie[i + 5] == 0x02 && i + 5 < in_len) {
> /* WMM element ID and OUI */
> /* Append WMM IE to the last index of out_ie */
>
> @@ -1734,13 +1734,13 @@ int rtw_restruct_sec_ie(struct adapter *adapter, u8 *in_ie, u8 *out_ie, uint in_
> authmode = _WPA2_IE_ID_;
>
> if (check_fwstate(pmlmepriv, WIFI_UNDER_WPS)) {
> - memcpy(out_ie+ielength, psecuritypriv->wps_ie, psecuritypriv->wps_ie_len);
> + memcpy(out_ie + ielength, psecuritypriv->wps_ie, psecuritypriv->wps_ie_len);
>
> ielength += psecuritypriv->wps_ie_len;
> } else if ((authmode == _WPA_IE_ID_) || (authmode == _WPA2_IE_ID_)) {
> /* copy RSN or SSN */
> - memcpy(&out_ie[ielength], &psecuritypriv->supplicant_ie[0], psecuritypriv->supplicant_ie[1]+2);
> - ielength += psecuritypriv->supplicant_ie[1]+2;
> + memcpy(&out_ie[ielength], &psecuritypriv->supplicant_ie[0], psecuritypriv->supplicant_ie[1] + 2);
> + ielength += psecuritypriv->supplicant_ie[1] + 2;
> rtw_report_sec_ie(adapter, authmode, psecuritypriv->supplicant_ie);
> }
>
> @@ -1865,7 +1865,7 @@ unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_
>
> phtpriv->ht_option = false;
>
> - p = rtw_get_ie(in_ie+12, _HT_CAPABILITY_IE_, &ielen, in_len-12);
> + p = rtw_get_ie(in_ie + 12, _HT_CAPABILITY_IE_, &ielen, in_len - 12);
>
> if (p && ielen > 0) {
> struct ieee80211_ht_cap ht_cap;
> @@ -1904,16 +1904,16 @@ unsigned int rtw_restructure_ht_ie(struct adapter *padapter, u8 *in_ie, u8 *out_
> else
> ht_cap.ampdu_params_info |= IEEE80211_HT_CAP_AMPDU_DENSITY & 0x00;
>
> - rtw_set_ie(out_ie+out_len, _HT_CAPABILITY_IE_,
> + rtw_set_ie(out_ie + out_len, _HT_CAPABILITY_IE_,
> sizeof(struct ieee80211_ht_cap),
> (unsigned char *)&ht_cap, pout_len);
>
> phtpriv->ht_option = true;
>
> - p = rtw_get_ie(in_ie+12, _HT_ADD_INFO_IE_, &ielen, in_len-12);
> + p = rtw_get_ie(in_ie + 12, _HT_ADD_INFO_IE_, &ielen, in_len - 12);
> if (p && (ielen == sizeof(struct ieee80211_ht_addt_info))) {
> out_len = *pout_len;
> - rtw_set_ie(out_ie+out_len, _HT_ADD_INFO_IE_, ielen, p+2, pout_len);
> + rtw_set_ie(out_ie + out_len, _HT_ADD_INFO_IE_, ielen, p + 2, pout_len);
> }
> }
> return phtpriv->ht_option;
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@...glegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20200310144702.14653-1-shreeya.patel23498%40gmail.com.
>
Powered by blists - more mailing lists