| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200310154358.39367-3-swboyd@chromium.org>
Date: Tue, 10 Mar 2020 08:43:57 -0700
From: Stephen Boyd <swboyd@...omium.org>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: linux-kernel@...r.kernel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Alok Chauhan <alokc@...eaurora.org>,
Douglas Anderson <dianders@...omium.org>,
Brendan Higgins <brendanhiggins@...gle.com>
Subject: [PATCH v2 2/3] i2c: qcom-geni: Grow a dev pointer to simplify code
Some lines are long here. Use a struct dev pointer to shorten lines and
simplify code. The clk_get() call can fail because of EPROBE_DEFER
problems too, so just remove the error print message because it isn't
useful. Finally, platform_get_irq() already prints an error so just
remove that error message.
Cc: Alok Chauhan <alokc@...eaurora.org>
Reviewed-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@...gle.com>
Signed-off-by: Stephen Boyd <swboyd@...omium.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 57 ++++++++++++++----------------
1 file changed, 26 insertions(+), 31 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 4efca130035a..2f5fb2e83f95 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -502,45 +502,40 @@ static int geni_i2c_probe(struct platform_device *pdev)
struct resource *res;
u32 proto, tx_depth;
int ret;
+ struct device *dev = &pdev->dev;
- gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
+ gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
if (!gi2c)
return -ENOMEM;
- gi2c->se.dev = &pdev->dev;
- gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+ gi2c->se.dev = dev;
+ gi2c->se.wrapper = dev_get_drvdata(dev->parent);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
+ gi2c->se.base = devm_ioremap_resource(dev, res);
if (IS_ERR(gi2c->se.base))
return PTR_ERR(gi2c->se.base);
- gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
- if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
- ret = PTR_ERR(gi2c->se.clk);
- dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
- return ret;
- }
+ gi2c->se.clk = devm_clk_get(dev, "se");
+ if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
+ return PTR_ERR(gi2c->se.clk);
- ret = device_property_read_u32(&pdev->dev, "clock-frequency",
- &gi2c->clk_freq_out);
+ ret = device_property_read_u32(dev, "clock-frequency",
+ &gi2c->clk_freq_out);
if (ret) {
- dev_info(&pdev->dev,
- "Bus frequency not specified, default to 100kHz.\n");
+ dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
gi2c->clk_freq_out = KHZ(100);
}
- if (has_acpi_companion(&pdev->dev))
- ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+ if (has_acpi_companion(dev))
+ ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
gi2c->irq = platform_get_irq(pdev, 0);
- if (gi2c->irq < 0) {
- dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
+ if (gi2c->irq < 0)
return gi2c->irq;
- }
ret = geni_i2c_clk_map_idx(gi2c);
if (ret) {
- dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n",
+ dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
gi2c->clk_freq_out, ret);
return ret;
}
@@ -549,29 +544,29 @@ static int geni_i2c_probe(struct platform_device *pdev)
init_completion(&gi2c->done);
spin_lock_init(&gi2c->lock);
platform_set_drvdata(pdev, gi2c);
- ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq, 0,
- dev_name(&pdev->dev), gi2c);
+ ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+ dev_name(dev), gi2c);
if (ret) {
- dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
+ dev_err(dev, "Request_irq failed:%d: err:%d\n",
gi2c->irq, ret);
return ret;
}
/* Disable the interrupt so that the system can enter low-power mode */
disable_irq(gi2c->irq);
i2c_set_adapdata(&gi2c->adap, gi2c);
- gi2c->adap.dev.parent = &pdev->dev;
- gi2c->adap.dev.of_node = pdev->dev.of_node;
+ gi2c->adap.dev.parent = dev;
+ gi2c->adap.dev.of_node = dev->of_node;
strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
ret = geni_se_resources_on(&gi2c->se);
if (ret) {
- dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
+ dev_err(dev, "Error turning on resources %d\n", ret);
return ret;
}
proto = geni_se_read_proto(&gi2c->se);
tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
if (proto != GENI_SE_I2C) {
- dev_err(&pdev->dev, "Invalid proto %d\n", proto);
+ dev_err(dev, "Invalid proto %d\n", proto);
geni_se_resources_off(&gi2c->se);
return -ENXIO;
}
@@ -581,11 +576,11 @@ static int geni_i2c_probe(struct platform_device *pdev)
true, true, true);
ret = geni_se_resources_off(&gi2c->se);
if (ret) {
- dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+ dev_err(dev, "Error turning off resources %d\n", ret);
return ret;
}
- dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
+ dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
gi2c->suspended = 1;
pm_runtime_set_suspended(gi2c->se.dev);
@@ -595,12 +590,12 @@ static int geni_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&gi2c->adap);
if (ret) {
- dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+ dev_err(dev, "Error adding i2c adapter %d\n", ret);
pm_runtime_disable(gi2c->se.dev);
return ret;
}
- dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+ dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
return 0;
}
--
Sent by a computer, using git, on the internet
Powered by blists - more mailing lists