| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200310100143.GB5379@paasikivi.fi.intel.com>
Date: Tue, 10 Mar 2020 12:01:43 +0200
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: Lad Prabhakar <prabhakar.csengg@...il.com>
Cc: Dave Stevenson <dave.stevenson@...pberrypi.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH v2 2/3] media: i2c: imx219: Add support for RAW8 bit
bayer format
Hi Prabhakar,
On Fri, Mar 06, 2020 at 10:32:45AM +0000, Lad Prabhakar wrote:
> IMX219 sensor is capable for RAW8/RAW10 modes. This commit adds support
> for RAW8 bayer format.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
> ---
> drivers/media/i2c/imx219.c | 161 +++++++++++++++++++++++++++++--------
> 1 file changed, 127 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 16010ca1781a..f96f3ce9fd85 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -90,6 +90,11 @@
>
> #define IMX219_REG_ORIENTATION 0x0172
>
> +#define IMX219_CSI_DATA_FORMAT_A_0_7 0x018c
> +#define IMX219_CSI_DATA_FORMAT_A_8_15 0x018d
> +
> +#define IMX219_OPPXCK_DIV 0x0309
> +
> /* Test Pattern Control */
> #define IMX219_REG_TEST_PATTERN 0x0600
> #define IMX219_TEST_PATTERN_DISABLE 0
> @@ -168,15 +173,12 @@ static const struct imx219_reg mode_3280x2464_regs[] = {
> {0x0171, 0x01},
> {0x0174, 0x00},
> {0x0175, 0x00},
> - {0x018c, 0x0a},
> - {0x018d, 0x0a},
> {0x0301, 0x05},
> {0x0303, 0x01},
> {0x0304, 0x03},
> {0x0305, 0x03},
> {0x0306, 0x00},
> {0x0307, 0x39},
> - {0x0309, 0x0a},
> {0x030b, 0x01},
> {0x030c, 0x00},
> {0x030d, 0x72},
> @@ -230,15 +232,12 @@ static const struct imx219_reg mode_1920_1080_regs[] = {
> {0x0171, 0x01},
> {0x0174, 0x00},
> {0x0175, 0x00},
> - {0x018c, 0x0a},
> - {0x018d, 0x0a},
> {0x0301, 0x05},
> {0x0303, 0x01},
> {0x0304, 0x03},
> {0x0305, 0x03},
> {0x0306, 0x00},
> {0x0307, 0x39},
> - {0x0309, 0x0a},
> {0x030b, 0x01},
> {0x030c, 0x00},
> {0x030d, 0x72},
> @@ -290,15 +289,12 @@ static const struct imx219_reg mode_1640_1232_regs[] = {
> {0x0171, 0x01},
> {0x0174, 0x01},
> {0x0175, 0x01},
> - {0x018c, 0x0a},
> - {0x018d, 0x0a},
> {0x0301, 0x05},
> {0x0303, 0x01},
> {0x0304, 0x03},
> {0x0305, 0x03},
> {0x0306, 0x00},
> {0x0307, 0x39},
> - {0x0309, 0x0a},
> {0x030b, 0x01},
> {0x030c, 0x00},
> {0x030d, 0x72},
> @@ -348,6 +344,27 @@ static const char * const imx219_supply_name[] = {
>
> #define IMX219_NUM_SUPPLIES ARRAY_SIZE(imx219_supply_name)
>
> +/*
> + * The supported formats.
> + * This table MUST contain 4 entries per format, to cover the various flip
> + * combinations in the order
> + * - no flip
> + * - h flip
> + * - v flip
> + * - h&v flips
> + */
> +static const u32 codes[] = {
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> + MEDIA_BUS_FMT_SGRBG10_1X10,
> + MEDIA_BUS_FMT_SGBRG10_1X10,
> + MEDIA_BUS_FMT_SBGGR10_1X10,
> +
> + MEDIA_BUS_FMT_SRGGB8_1X8,
> + MEDIA_BUS_FMT_SGRBG8_1X8,
> + MEDIA_BUS_FMT_SGBRG8_1X8,
> + MEDIA_BUS_FMT_SBGGR8_1X8,
> +};
> +
> /*
> * Initialisation delay between XCLR low->high and the moment when the sensor
> * can start capture (i.e. can leave software stanby) must be not less than:
> @@ -413,6 +430,8 @@ struct imx219 {
> struct v4l2_subdev sd;
> struct media_pad pad;
>
> + struct v4l2_mbus_framefmt fmt;
> +
> struct clk *xclk; /* system clock to IMX219 */
> u32 xclk_freq;
>
> @@ -519,34 +538,57 @@ static int imx219_write_regs(struct imx219 *imx219,
> }
>
> /* Get bayer order based on flip setting. */
> -static u32 imx219_get_format_code(struct imx219 *imx219)
> +static u32 imx219_get_format_code(struct imx219 *imx219, u32 code)
> {
> - /*
> - * Only one bayer order is supported.
> - * It depends on the flip settings.
> - */
> - static const u32 codes[2][2] = {
> - { MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_SGRBG10_1X10, },
> - { MEDIA_BUS_FMT_SGBRG10_1X10, MEDIA_BUS_FMT_SBGGR10_1X10, },
> - };
> + int i;
unsigned int
>
> lockdep_assert_held(&imx219->mutex);
> - return codes[imx219->vflip->val][imx219->hflip->val];
> +
> + for (i = 0; i < ARRAY_SIZE(codes); i++)
> + if (codes[i] == code)
> + break;
> +
> + if (i >= ARRAY_SIZE(codes))
> + i = 0;
> +
> + i = (i & ~3) | (imx219->vflip->val ? 2 : 0) |
> + (imx219->hflip->val ? 1 : 0);
> +
> + return codes[i];
> +}
> +
> +static void imx219_set_default_format(struct imx219 *imx219)
> +{
> + struct v4l2_mbus_framefmt *fmt;
> +
> + mutex_lock(&imx219->mutex);
No mutex needed; all this information is static, and you're calling the
function from probe before any driver's external APIs are accessible.
> +
> + fmt = &imx219->fmt;
> + fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> + fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> + fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> + fmt->colorspace,
> + fmt->ycbcr_enc);
> + fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> + fmt->width = supported_modes[0].width;
> + fmt->height = supported_modes[0].height;
> + fmt->field = V4L2_FIELD_NONE;
> +
> + mutex_unlock(&imx219->mutex);
> }
>
> static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> {
> struct imx219 *imx219 = to_imx219(sd);
> + struct v4l2_mbus_framefmt *cur_fmt = &imx219->fmt;
> struct v4l2_mbus_framefmt *try_fmt =
> v4l2_subdev_get_try_format(sd, fh->pad, 0);
>
> mutex_lock(&imx219->mutex);
>
> /* Initialize try_fmt */
> - try_fmt->width = supported_modes[0].width;
> - try_fmt->height = supported_modes[0].height;
> - try_fmt->code = imx219_get_format_code(imx219);
> - try_fmt->field = V4L2_FIELD_NONE;
> + try_fmt = cur_fmt;
The default try format should reflect the device default, not current
format. Although the pixel order needs to be taken into account, as was
already done.
>
> mutex_unlock(&imx219->mutex);
>
> @@ -648,14 +690,12 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
> {
> struct imx219 *imx219 = to_imx219(sd);
>
> - /*
> - * Only one bayer order is supported (though it depends on the flip
> - * settings)
> - */
> - if (code->index > 0)
> + if (code->pad != 0)
> + return -EINVAL;
The pad is already checked by the caller, no need to repeat here.
> + if (code->index >= (ARRAY_SIZE(codes) / 4))
> return -EINVAL;
>
> - code->code = imx219_get_format_code(imx219);
> + code->code = imx219_get_format_code(imx219, codes[code->index * 4]);
>
> return 0;
> }
> @@ -669,7 +709,7 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd,
> if (fse->index >= ARRAY_SIZE(supported_modes))
> return -EINVAL;
>
> - if (fse->code != imx219_get_format_code(imx219))
> + if (fse->code != imx219_get_format_code(imx219, imx219->fmt.code))
> return -EINVAL;
>
> fse->min_width = supported_modes[fse->index].width;
> @@ -696,7 +736,6 @@ static void imx219_update_pad_format(struct imx219 *imx219,
> {
> fmt->format.width = mode->width;
> fmt->format.height = mode->height;
> - fmt->format.code = imx219_get_format_code(imx219);
> fmt->format.field = V4L2_FIELD_NONE;
>
> imx219_reset_colorspace(&fmt->format);
> @@ -710,10 +749,12 @@ static int __imx219_get_pad_format(struct imx219 *imx219,
> struct v4l2_mbus_framefmt *try_fmt =
> v4l2_subdev_get_try_format(&imx219->sd, cfg, fmt->pad);
> /* update the code which could change due to vflip or hflip: */
> - try_fmt->code = imx219_get_format_code(imx219);
> + try_fmt->code = imx219_get_format_code(imx219, try_fmt->code);
> fmt->format = *try_fmt;
> } else {
> imx219_update_pad_format(imx219, imx219->mode, fmt);
> + fmt->format.code = imx219_get_format_code(imx219,
> + imx219->fmt.code);
> }
>
> return 0;
> @@ -741,11 +782,18 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
> const struct imx219_mode *mode;
> struct v4l2_mbus_framefmt *framefmt;
> int exposure_max, exposure_def, hblank;
> + int i;
unsigned int
>
> mutex_lock(&imx219->mutex);
>
> + for (i = 0; i < ARRAY_SIZE(codes); i++)
> + if (codes[i] == fmt->format.code)
> + break;
> + if (i >= ARRAY_SIZE(codes))
> + i = 0;
> +
> /* Bayer order varies with flips */
> - fmt->format.code = imx219_get_format_code(imx219);
> + fmt->format.code = imx219_get_format_code(imx219, codes[i]);
>
> mode = v4l2_find_nearest_size(supported_modes,
> ARRAY_SIZE(supported_modes),
> @@ -755,7 +803,9 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> *framefmt = fmt->format;
> - } else if (imx219->mode != mode) {
> + } else if (imx219->mode != mode ||
> + imx219->fmt.code != fmt->format.code) {
> + imx219->fmt = fmt->format;
> imx219->mode = mode;
> /* Update limits and set FPS to default */
> __v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
> @@ -786,6 +836,40 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static int imx219_set_framefmt(struct imx219 *imx219)
> +{
> + int ret;
> +
> + switch (imx219->fmt.code) {
> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> + case MEDIA_BUS_FMT_SGRBG8_1X8:
> + case MEDIA_BUS_FMT_SGBRG8_1X8:
> + case MEDIA_BUS_FMT_SBGGR8_1X8:
> + ret = imx219_write_reg(imx219, IMX219_CSI_DATA_FORMAT_A_0_7,
> + IMX219_REG_VALUE_08BIT, 0x08);
> + ret |= imx219_write_reg(imx219, IMX219_CSI_DATA_FORMAT_A_8_15,
> + IMX219_REG_VALUE_08BIT, 0x08);
> + ret |= imx219_write_reg(imx219, IMX219_OPPXCK_DIV,
> + IMX219_REG_VALUE_08BIT, 0x08);
What kind of error codes do you expect to get? :-)
Please either return the error immediately, or check ret before the
assignment.
> + break;
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + case MEDIA_BUS_FMT_SGRBG10_1X10:
> + case MEDIA_BUS_FMT_SGBRG10_1X10:
> + case MEDIA_BUS_FMT_SBGGR10_1X10:
> + ret = imx219_write_reg(imx219, IMX219_CSI_DATA_FORMAT_A_0_7,
> + IMX219_REG_VALUE_08BIT, 0x0a);
> + ret |= imx219_write_reg(imx219, IMX219_CSI_DATA_FORMAT_A_8_15,
> + IMX219_REG_VALUE_08BIT, 0x0a);
> + ret |= imx219_write_reg(imx219, IMX219_OPPXCK_DIV,
> + IMX219_REG_VALUE_08BIT, 0x0a);
> + break;
> + default:
> + ret = -EINVAL;
You could return -EINVAL here.
> + }
> +
> + return ret;
> +}
> +
> static int imx219_start_streaming(struct imx219 *imx219)
> {
> struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
> @@ -800,6 +884,12 @@ static int imx219_start_streaming(struct imx219 *imx219)
> return ret;
> }
>
> + ret = imx219_set_framefmt(imx219);
> + if (ret) {
> + dev_err(&client->dev, "%s failed to set format\n", __func__);
The error code could be useful.
> + return ret;
> + }
> +
> /* Apply customized values from user */
> ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
> if (ret)
> @@ -1253,6 +1343,9 @@ static int imx219_probe(struct i2c_client *client)
> /* Initialize source pad */
> imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
>
> + /* Initialize default format */
> + imx219_set_default_format(imx219);
> +
> ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
> if (ret) {
> dev_err(dev, "failed to init entity pads: %d\n", ret);
--
Kind regards,
Sakari Ailus
Powered by blists - more mailing lists