[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200311191517.8221-1-bryan.odonoghue@linaro.org>
Date: Wed, 11 Mar 2020 19:15:11 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: agross@...nel.org, bjorn.andersson@...aro.org,
linux-usb@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
jackp@...eaurora.org, robh@...nel.org,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Subject: [PATCH 0/6] Add DT bindings for USB HS/SS in QCS404
This set adds DT entries for the Primary and Secondary DWC3 controllers on
QCS404 and the PHYs attached to those controllers.
Additional board-specific bindings are required to make the SoC change
functional on the EVBs as on the EVB a type-c connector interfaces with the
SoC which is responsible to toggle VBUS via a regulator interface directly.
These patches have been through seven review cycles already and have a
number of Review-by and Ack-by. For the pusposes of making it easier to
merge this set focuses on the SoC DT bindings and target board bindings
alone.
The last set for can be found here:
https://lkml.org/lkml/2020/3/3/807
Bjorn Andersson (1):
arm64: dts: qcom: qcs404: Add USB devices and PHYs
Bryan O'Donoghue (5):
arm64: dts: qcom: qcs404-evb: Define VBUS pins
arm64: dts: qcom: qcs404-evb: Define USB ID pin
arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator
arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage
arm64: dts: qcom: qcs404-evb: Enable USB controllers
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 90 +++++++++++++++++++-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 100 +++++++++++++++++++++++
2 files changed, 189 insertions(+), 1 deletion(-)
--
2.25.1
Powered by blists - more mailing lists