| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 11 Mar 2020 16:47:00 -0500
From: Alex Elder <elder@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"David S . Miller" <davem@...emloft.net>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Andy Gross <agross@...nel.org>, linux-arm-msm@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] dt-bindings: soc: qcom: fix IPA binding
The definitions for the "qcom,smem-states" and "qcom,smem-state-names"
properties need to list their "$ref" under an "allOf" keyword.
In addition, fix two problems in the example at the end:
- Use #include for header files that define needed symbolic values
- Terminate the line that includes the "ipa-shared" register space
name with a comma rather than a semicolon
Finally, update some white space in the example for better alignment.
Signed-off-by: Alex Elder <elder@...aro.org>
---
The IPA driver (including "qcom,ipa.yaml") landed in the net-next
tree last week, so this patch is built upon that. This probably
means this patch should be taken through net-next as well, but
I'll leave that to the maintainers to work out.
-Alex
.../devicetree/bindings/net/qcom,ipa.yaml | 32 +++++++++++--------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 91d08f2c7791..140f15245654 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -87,14 +87,16 @@ properties:
- const: config
qcom,smem-states:
- $ref: /schemas/types.yaml#/definitions/phandle-array
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle-array
description: State bits used in by the AP to signal the modem.
items:
- description: Whether the "ipa-clock-enabled" state bit is valid
- description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
- $ref: /schemas/types.yaml#/definitions/string-array
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string-array
description: The names of the state bits used for SMP2P output
items:
- const: ipa-clock-enabled-valid
@@ -139,6 +141,10 @@ oneOf:
examples:
- |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+
smp2p-mpss {
compatible = "qcom,smp2p";
ipa_smp2p_out: ipa-ap-to-modem {
@@ -162,17 +168,17 @@ examples:
<0 0x1e47000 0 0x2000>,
<0 0x1e04000 0 0x2c000>;
reg-names = "ipa-reg",
- "ipa-shared";
- "gsi";
+ "ipa-shared",
+ "gsi";
interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
- <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
- <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+ <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+ <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
- "gsi",
- "ipa-clock-query",
- "ipa-setup-ready";
+ "gsi",
+ "ipa-clock-query",
+ "ipa-setup-ready";
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
@@ -182,11 +188,11 @@ examples:
<&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
<&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
interconnect-names = "memory",
- "imem",
- "config";
+ "imem",
+ "config";
qcom,smem-states = <&ipa_smp2p_out 0>,
- <&ipa_smp2p_out 1>;
+ <&ipa_smp2p_out 1>;
qcom,smem-state-names = "ipa-clock-enabled-valid",
"ipa-clock-enabled";
};
--
2.20.1
Powered by blists - more mailing lists