| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 11 Mar 2020 10:53:03 +0530
From: Amit Kucheria <amit.kucheria@...aro.org>
To: Joe Perches <joe@...ches.com>
Cc: Stanimir Varbanov <stanimir.varbanov@...aro.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ohad Ben-Cohen <ohad@...ery.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Kishon Vijay Abraham I <kishon@...com>,
Linus Walleij <linus.walleij@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
linux-media@...r.kernel.org,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>, linux-gpio@...r.kernel.org,
linux-remoteproc@...r.kernel.org,
Linux PM list <linux-pm@...r.kernel.org>
Subject: Re: [PATCH -next 011/491] ARM/QUALCOMM SUPPORT: Use fallthrough;
On Wed, Mar 11, 2020 at 10:37 AM Joe Perches <joe@...ches.com> wrote:
>
> Convert the various uses of fallthrough comments to fallthrough;
>
> Done via script
> Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/
Reviewed-by: Amit Kucheria <amit.kucheria@...aro.org>
> Signed-off-by: Joe Perches <joe@...ches.com>
> ---
> drivers/media/platform/qcom/venus/vdec.c | 2 +-
> drivers/phy/qualcomm/phy-qcom-usb-hs.c | 2 +-
> drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 4 ++--
> drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 2 +-
> drivers/rpmsg/qcom_glink_native.c | 4 ++--
> drivers/soc/qcom/socinfo.c | 16 ++++++++--------
> drivers/thermal/qcom/tsens-v0_1.c | 8 ++++----
> drivers/thermal/qcom/tsens-v1.c | 4 ++--
> 8 files changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
> index f34920..9e0451 100644
> --- a/drivers/media/platform/qcom/venus/vdec.c
> +++ b/drivers/media/platform/qcom/venus/vdec.c
> @@ -983,7 +983,7 @@ static int vdec_stop_capture(struct venus_inst *inst)
> switch (inst->codec_state) {
> case VENUS_DEC_STATE_DECODING:
> ret = hfi_session_flush(inst, HFI_FLUSH_ALL);
> - /* fallthrough */
> + fallthrough;
> case VENUS_DEC_STATE_DRAIN:
> vdec_cancel_dst_buffers(inst);
> inst->codec_state = VENUS_DEC_STATE_STOPPED;
> diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
> index 610542..327df1a 100644
> --- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
> @@ -53,7 +53,7 @@ static int qcom_usb_hs_phy_set_mode(struct phy *phy,
> case PHY_MODE_USB_OTG:
> case PHY_MODE_USB_HOST:
> val |= ULPI_INT_IDGRD;
> - /* fall through */
> + fallthrough;
> case PHY_MODE_USB_DEVICE:
> val |= ULPI_INT_SESS_VALID;
> default:
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index fe0be8..3b0ab0e 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -793,13 +793,13 @@ static int pmic_gpio_populate(struct pmic_gpio_state *state,
> switch (subtype) {
> case PMIC_GPIO_SUBTYPE_GPIO_4CH:
> pad->have_buffer = true;
> - /* Fall through */
> + fallthrough;
> case PMIC_GPIO_SUBTYPE_GPIOC_4CH:
> pad->num_sources = 4;
> break;
> case PMIC_GPIO_SUBTYPE_GPIO_8CH:
> pad->have_buffer = true;
> - /* Fall through */
> + fallthrough;
> case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
> pad->num_sources = 8;
> break;
> diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
> index 338a15..b5949f7 100644
> --- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
> @@ -346,7 +346,7 @@ static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
> return -EINVAL;
> }
> pin->pull_up_strength = arg;
> - /* FALLTHROUGH */
> + fallthrough;
> case PIN_CONFIG_BIAS_PULL_UP:
> pin->bias = pin->pull_up_strength;
> banks |= BIT(2);
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index 1995f5b..f40312 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -553,7 +553,7 @@ static void qcom_glink_receive_version(struct qcom_glink *glink,
> break;
> case GLINK_VERSION_1:
> glink->features &= features;
> - /* FALLTHROUGH */
> + fallthrough;
> default:
> qcom_glink_send_version_ack(glink);
> break;
> @@ -584,7 +584,7 @@ static void qcom_glink_receive_version_ack(struct qcom_glink *glink,
> break;
>
> glink->features &= features;
> - /* FALLTHROUGH */
> + fallthrough;
> default:
> qcom_glink_send_version(glink);
> break;
> diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
> index 7864b7..8ae5646 100644
> --- a/drivers/soc/qcom/socinfo.c
> +++ b/drivers/soc/qcom/socinfo.c
> @@ -325,7 +325,7 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
> debugfs_create_x32("raw_device_number", 0400,
> qcom_socinfo->dbg_root,
> &qcom_socinfo->info.raw_device_num);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 11):
> case SOCINFO_VERSION(0, 10):
> case SOCINFO_VERSION(0, 9):
> @@ -333,12 +333,12 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
>
> debugfs_create_u32("foundry_id", 0400, qcom_socinfo->dbg_root,
> &qcom_socinfo->info.foundry_id);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 8):
> case SOCINFO_VERSION(0, 7):
> DEBUGFS_ADD(info, pmic_model);
> DEBUGFS_ADD(info, pmic_die_rev);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 6):
> qcom_socinfo->info.hw_plat_subtype =
> __le32_to_cpu(info->hw_plat_subtype);
> @@ -346,7 +346,7 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
> debugfs_create_u32("hardware_platform_subtype", 0400,
> qcom_socinfo->dbg_root,
> &qcom_socinfo->info.hw_plat_subtype);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 5):
> qcom_socinfo->info.accessory_chip =
> __le32_to_cpu(info->accessory_chip);
> @@ -354,27 +354,27 @@ static void socinfo_debugfs_init(struct qcom_socinfo *qcom_socinfo,
> debugfs_create_u32("accessory_chip", 0400,
> qcom_socinfo->dbg_root,
> &qcom_socinfo->info.accessory_chip);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 4):
> qcom_socinfo->info.plat_ver = __le32_to_cpu(info->plat_ver);
>
> debugfs_create_u32("platform_version", 0400,
> qcom_socinfo->dbg_root,
> &qcom_socinfo->info.plat_ver);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 3):
> qcom_socinfo->info.hw_plat = __le32_to_cpu(info->hw_plat);
>
> debugfs_create_u32("hardware_platform", 0400,
> qcom_socinfo->dbg_root,
> &qcom_socinfo->info.hw_plat);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 2):
> qcom_socinfo->info.raw_ver = __le32_to_cpu(info->raw_ver);
>
> debugfs_create_u32("raw_version", 0400, qcom_socinfo->dbg_root,
> &qcom_socinfo->info.raw_ver);
> - /* Fall through */
> + fallthrough;
> case SOCINFO_VERSION(0, 1):
> DEBUGFS_ADD(info, build_id);
> break;
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 4b8dd6..893ce1 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -163,7 +163,7 @@ static int calibrate_8916(struct tsens_priv *priv)
> p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT;
> for (i = 0; i < priv->num_sensors; i++)
> p2[i] = ((base1 + p2[i]) << 3);
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB2:
> base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK);
> p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT;
> @@ -228,7 +228,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
> p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
> p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB:
> case ONE_PT_CALIB2:
> base1 = bkp[0] & BASE1_MASK;
> @@ -263,7 +263,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
> p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
> p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB:
> case ONE_PT_CALIB2:
> base1 = calib[0] & BASE1_MASK;
> @@ -293,7 +293,7 @@ static int calibrate_8974(struct tsens_priv *priv)
> p2[i] <<= 2;
> p2[i] |= BIT_APPEND;
> }
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB2:
> for (i = 0; i < priv->num_sensors; i++) {
> p1[i] += base1;
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index bd2ddb..d096d3 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -202,7 +202,7 @@ static int calibrate_v1(struct tsens_priv *priv)
> p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT;
> for (i = 0; i < priv->num_sensors; i++)
> p2[i] = ((base1 + p2[i]) << 2);
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB2:
> base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT;
> p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
> @@ -263,7 +263,7 @@ static int calibrate_8976(struct tsens_priv *priv)
>
> for (i = 0; i < priv->num_sensors; i++)
> p2[i] = ((base1 + p2[i]) << 2);
> - /* Fall through */
> + fallthrough;
> case ONE_PT_CALIB2:
> base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
> p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
> --
> 2.24.0
>
Powered by blists - more mailing lists