linux-kernel - [PATCH v2 3/4] arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 11 Mar 2020 08:49:28 +0100
From:   Michael Walle <michael@...le.cc>
To:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Cc:     Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Li Yang <leoyang.li@....com>, Michael Walle <michael@...le.cc>
Subject: [PATCH v2 3/4] arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS

The KBox A-230-LS supports four external ports which are connected to
the internal switch of the LS1028A via QSGMII. Now that the Felix switch
is supported, add these ports in the device tree.

Signed-off-by: Michael Walle <michael@...le.cc>
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts     | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 32f6c80414bc..4e30558485b0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -18,6 +18,29 @@
 		     "kontron,sl28", "fsl,ls1028a";
 };
 
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
 &i2c3 {
 	eeprom@57 {
 		compatible = "atmel,24c32";
@@ -25,3 +48,40 @@
 		pagesize = <32>;
 	};
 };
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
-- 
2.20.1