Message-ID: <22341236-8298-dc97-217b-46071a362207@ti.com>
Date:   Wed, 11 Mar 2020 08:02:44 -0500
From:   Dan Murphy <dmurphy@...com>
To:     Luca Weiss <luca@...tu.xyz>, <linux-leds@...r.kernel.org>
CC:     Heiko Stuebner <heiko@...ech.de>, Icenowy Zheng <icenowy@...c.io>,
        Jacek Anaszewski <jacek.anaszewski@...il.com>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Mark Rutland <mark.rutland@....com>,
        Maxime Ripard <mripard@...nel.org>,
        Pavel Machek <pavel@....cz>, Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <~postmarketos/upstreaming@...ts.sr.ht>
Subject: Re: [PATCH 3/3] leds: add sgm3140 driver

Luca

On 3/9/20 3:35 PM, Luca Weiss wrote:
> Add a driver for the SGMICRO SGM3140 Buck/Boost Charge Pump LED driver.
>
> This device is controlled by two GPIO pins, one for enabling and the
> second one for switching between torch and flash mode.

How does one enable torch and one enable flash?

Is the flash-gpio control this or does the enable-gpio enable the flash?

The DT binding did not indicate what the GPIOs are really going to control.

>
> Signed-off-by: Luca Weiss <luca@...tu.xyz>
> ---
> Changes since RFC:
> - address review comments from Jacek Anaszewski:
>    - implement strobe_get op
>    - implement timeout_set op
>    - init v4l2_sd_cfg variable
>    - remove init_data.devicename assignemnt
>    - use devm_ version of led_classdev_flash_register_ext
>    - release child_node in case of success
>
>   drivers/leds/Kconfig        |   9 ++
>   drivers/leds/Makefile       |   1 +
>   drivers/leds/leds-sgm3140.c | 260 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 270 insertions(+)
>   create mode 100644 drivers/leds/leds-sgm3140.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 4b68520ac251..9206fc66799d 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -836,6 +836,15 @@ config LEDS_LM36274
>   	  Say Y to enable the LM36274 LED driver for TI LMU devices.
>   	  This supports the LED device LM36274.
>   
> +config LEDS_SGM3140
> +	tristate "LED support for the SGM3140"
> +	depends on LEDS_CLASS_FLASH
> +	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS

What is the purpose of this?  Enable if V4L2_FLASH_LED_CLASS is enabled 
or if it is not enabled?

Seems to be a do nothing dependency in the Kconfig

> +	depends on OF
> +	help
> +	  This option enables support for the SGM3140 500mA Buck/Boost Charge
> +	  Pump LED Driver.
> +
>   comment "LED Triggers"
>   source "drivers/leds/trigger/Kconfig"
>   
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 2da39e896ce8..38d57dd53e4b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -85,6 +85,7 @@ obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
>   obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= leds-ti-lmu-common.o
>   obj-$(CONFIG_LEDS_LM3697)		+= leds-lm3697.o
>   obj-$(CONFIG_LEDS_LM36274)		+= leds-lm36274.o
> +obj-$(CONFIG_LEDS_SGM3140)		+= leds-sgm3140.o
>   
>   # LED SPI Drivers
>   obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
> diff --git a/drivers/leds/leds-sgm3140.c b/drivers/leds/leds-sgm3140.c
> new file mode 100644
> index 000000000000..357f4cbb279a
> --- /dev/null
> +++ b/drivers/leds/leds-sgm3140.c
> @@ -0,0 +1,260 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2020 Luca Weiss <luca@...tu.xyz>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include <media/v4l2-flash-led-class.h>
> +
> +#define FLASH_TIMEOUT_DEFAULT		250000 /* 250ms */
> +#define FLASH_MAX_TIMEOUT_DEFAULT	300000 /* 300ms */
> +
> +struct sgm3140 {
> +	struct gpio_desc *flash_gpio;
> +	struct gpio_desc *enable_gpio;
> +
> +	/* current timeout in us */
> +	u32 timeout;
> +	/* maximum timeout in us */
> +	u32 max_timeout;
> +
> +	struct led_classdev_flash fled_cdev;
> +	struct v4l2_flash *v4l2_flash;
> +
> +	struct timer_list powerdown_timer;
> +};
> +
> +static struct sgm3140 *flcdev_to_sgm3140(struct led_classdev_flash *flcdev)
> +{
> +	return container_of(flcdev, struct sgm3140, fled_cdev);
> +}
> +
> +static int sgm3140_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
> +{
> +	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
> +
> +	if (state) {
> +		gpiod_set_value_cansleep(priv->flash_gpio, 1);
> +		gpiod_set_value_cansleep(priv->enable_gpio, 1);
> +		mod_timer(&priv->powerdown_timer,
> +			  jiffies + usecs_to_jiffies(priv->timeout));
> +	} else {
> +		gpiod_set_value_cansleep(priv->enable_gpio, 0);
> +		gpiod_set_value_cansleep(priv->flash_gpio, 0);
> +		del_timer_sync(&priv->powerdown_timer);
> +	}
> +
> +	return 0;
> +}
> +
> +static int sgm3140_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
> +{
> +	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
> +
> +	*state = timer_pending(&priv->powerdown_timer);
> +
> +	return 0;
> +}
> +
> +static int sgm3140_timeout_set(struct led_classdev_flash *fled_cdev, u32 timeout)
> +{
> +	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
> +
> +	priv->timeout = timeout;
> +
> +	return 0;
> +}
> +
> +struct led_flash_ops sgm3140_flash_ops = {
> +	.strobe_set = sgm3140_strobe_set,
> +	.strobe_get = sgm3140_strobe_get,
> +	.timeout_set = sgm3140_timeout_set,
> +};
> +
> +int sgm3140_brightness_set(struct led_classdev *led_cdev,
> +			   enum led_brightness brightness)
> +{
> +	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> +	struct sgm3140 *priv = flcdev_to_sgm3140(fled_cdev);
> +
> +	if (brightness == LED_OFF)
> +		gpiod_set_value_cansleep(priv->enable_gpio, 0);
> +	else
> +		gpiod_set_value_cansleep(priv->enable_gpio, 1);
> +
> +	return 0;
> +}
> +
> +static void sgm3140_powerdown_timer(struct timer_list *t)
> +{
> +	struct sgm3140 *priv = from_timer(priv, t, powerdown_timer);
> +
> +	gpiod_set_value_cansleep(priv->enable_gpio, 0);
> +	gpiod_set_value_cansleep(priv->flash_gpio, 0);
> +}
> +
> +static void sgm3140_init_flash_timeout(struct sgm3140 *priv)
> +{
> +	struct led_classdev_flash *fled_cdev = &priv->fled_cdev;
> +	struct led_flash_setting *s;
> +
> +	/* Init flash timeout setting */
> +	s = &fled_cdev->timeout;
> +	s->min = 1;
> +	s->max = priv->max_timeout;
> +	s->step = 1;
> +	s->val = FLASH_TIMEOUT_DEFAULT;
> +}
> +
> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> +static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv,
> +					   struct v4l2_flash_config *v4l2_sd_cfg)
> +{
> +	struct led_classdev *led_cdev = &priv->fled_cdev.led_cdev;
> +	struct led_flash_setting *s;
> +
> +	strlcpy(v4l2_sd_cfg->dev_name, led_cdev->dev->kobj.name,
> +		sizeof(v4l2_sd_cfg->dev_name));
> +
> +	/* Init flash intensity setting */
> +	s = &v4l2_sd_cfg->intensity;
> +	s->min = 0;
> +	s->max = 1;
> +	s->step = 1;
> +	s->val = 1;
> +}
> +
> +#else
> +static void sgm3140_init_v4l2_flash_config(struct sgm3140 *priv,
> +					   struct v4l2_flash_config *v4l2_sd_cfg)
> +{
> +}
> +#endif
> +
> +static int sgm3140_probe(struct platform_device *pdev)
> +{
> +	struct sgm3140 *priv;
> +	struct led_classdev *led_cdev;
> +	struct led_classdev_flash *fled_cdev;
> +	struct led_init_data init_data = {};
> +	struct device_node *child_node;
> +	struct v4l2_flash_config v4l2_sd_cfg = {};
> +	int ret;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->flash_gpio = devm_gpiod_get(&pdev->dev, "flash", GPIOD_OUT_LOW);
> +	ret = PTR_ERR_OR_ZERO(priv->flash_gpio);
> +	if (ret) {
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request flash gpio: %d\n",
> +				ret);
> +		return ret;
> +	}
> +
> +	priv->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", GPIOD_OUT_LOW);
> +	ret = PTR_ERR_OR_ZERO(priv->enable_gpio);
> +	if (ret) {
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to request enable gpio: %d\n",
> +				ret);
> +		return ret;
> +	}
> +
> +	child_node = of_get_next_available_child(pdev->dev.of_node, NULL);

Please use the device_property api's to retrieve DT settings.

> +	if (!child_node) {
> +		dev_err(&pdev->dev, "No DT child node found for connected LED.\n");
> +		return -EINVAL;
> +	}
> +
> +
> +	ret = of_property_read_u32(child_node, "flash-max-timeout-us",
> +				   &priv->max_timeout);
Please use the device_property api's to retrieve DT settings.  Then 
there is no need to release the "of" child node.
> +	if (ret < 0) {
if (ret)
> +		priv->max_timeout = FLASH_MAX_TIMEOUT_DEFAULT;
> +		dev_warn(&pdev->dev, "flash-max-timeout-us DT property missing\n");
> +	}
> +
> +	/*
> +	 * Set default timeout to FLASH_DEFAULT_TIMEOUT except if max_timeout
> +	 * from DT is lower.
> +	 */
> +	priv->timeout = min(priv->max_timeout, (u32)FLASH_TIMEOUT_DEFAULT);
> +
> +	timer_setup(&priv->powerdown_timer, sgm3140_powerdown_timer, 0);
> +
> +	fled_cdev = &priv->fled_cdev;
> +	led_cdev = &fled_cdev->led_cdev;
> +
> +	fled_cdev->ops = &sgm3140_flash_ops;
> +
> +	led_cdev->brightness_set_blocking = sgm3140_brightness_set;
> +	led_cdev->max_brightness = LED_ON;
> +	led_cdev->flags |= LED_DEV_CAP_FLASH;
> +
> +	sgm3140_init_flash_timeout(priv);
> +
> +	init_data.fwnode = of_fwnode_handle(child_node);
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	/* Register in the LED subsystem */
> +	ret = devm_led_classdev_flash_register_ext(&pdev->dev, fled_cdev, &init_data);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Failed to register flash device: %d\n",
> +			ret);
> +		goto err;
> +	}
> +
> +	sgm3140_init_v4l2_flash_config(priv, &v4l2_sd_cfg);
> +
> +	/* Create V4L2 Flash subdev */
> +	priv->v4l2_flash = v4l2_flash_init(&pdev->dev, of_fwnode_handle(child_node),
> +					   fled_cdev, NULL,
> +					   &v4l2_sd_cfg);
> +	if (IS_ERR(priv->v4l2_flash)) {
> +		ret = PTR_ERR(priv->v4l2_flash);
> +		goto err;

Do you need to jump here?  This should just fall out and go through err 
anyway.

Dan

Powered by blists - more mailing lists