| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200311131210.GA5115@afzalpc>
Date: Wed, 11 Mar 2020 18:42:10 +0530
From: afzal mohammed <afzal.mohd.ma@...il.com>
To: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Nathan Chancellor <natechancellor@...il.com>,
linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paulburton@...nel.org>,
Florian Fainelli <f.fainelli@...il.com>,
bcm-kernel-feedback-list@...adcom.com,
"Maciej W. Rozycki" <macro@...ux-mips.org>,
Jiaxun Yang <jiaxun.yang@...goat.com>,
Keguang Zhang <keguang.zhang@...il.com>,
Huacai Chen <chenhc@...ote.com>,
John Crispin <john@...ozen.org>
Subject: Re: [PATCH v4] MIPS: Replace setup_irq() by request_irq()
Hi Thomas,
On Wed, Mar 11, 2020 at 11:42:17AM +0100, Thomas Bogendoerfer wrote:
> On Wed, Mar 11, 2020 at 02:33:08PM +0530, afzal mohammed wrote:
> > diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
> > int r4k_clockevent_init(void)
> > {
> > - unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
> > + unsigned long flags = IRQF_PERCPU | IRQF_TIMER;
> I don't see why this should help. In my tree only sgi-ip30 removes
> IRQF_SHARED from flags, but then it uses setup_percpu_irq().
> What do I miss ?
You did not miss anything. Though it works, i took a wrong route
following the tags & arrived at that solution in a hurry.
(struct irqaction used in sgi-ip30 was used here earlier w/ setup_irq).
The problem is sanity checks in request_irq() [ rather in
request_thread_iq() ]
if (((irqflags & IRQF_SHARED) && !dev_id) ||
(!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
return -EINVAL;
If IRQF_SHARED is passed, it exepcts a non-NULL dev_id, here it is
NULL, setup_irq() doesn't have any check like that.
So i think proper solution is to add a non NULL dev_id, as removing
IRQF_SHARED might affect some platforms that might be using that
interrupt line shared.
Patch with non-NULL dev_id below, it works w/ Nathan's test case.
Would you prefer an incremental patch or a fixed up v5 patch ?
i will test build the other cases as well & sent the patch later today,
though it is trivial, just being paranoid, since bitten by build error
earlier.
Also there was no meaningful pointer to pass as dev_id except in one
case, so i have used name itself.
Regards
afzal
--->8---
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index c8bbac0c5051..cbbb27fbab19 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -758,7 +758,7 @@ void __init arch_init_irq(void)
/* Register the bus error interrupt. */
if (dec_interrupt[DEC_IRQ_BUS] >= 0 && busirq_handler) {
if (request_irq(dec_interrupt[DEC_IRQ_BUS], busirq_handler,
- busirq_flags, "bus error", NULL))
+ busirq_flags, "bus error", "bus error"))
pr_err("Failed to register bus error interrupt\n");
}
/* Register the HALT interrupt. */
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 64e917dfe6b2..4b19810c67d4 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -292,7 +292,7 @@ int r4k_clockevent_init(void)
cp0_timer_irq_installed = 1;
- if (request_irq(irq, c0_compare_interrupt, flags, "timer", NULL))
+ if (request_irq(irq, c0_compare_interrupt, flags, "timer", cd))
pr_err("Failed to request irq %d (timer)\n", irq);
return 0;
diff --git a/arch/mips/loongson2ef/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c
index 34e15e8b7a8f..1c99e83cabae 100644
--- a/arch/mips/loongson2ef/lemote-2f/irq.c
+++ b/arch/mips/loongson2ef/lemote-2f/irq.c
@@ -109,7 +109,7 @@ void __init mach_init_irq(void)
/* setup north bridge irq (bonito) */
if (request_irq(LOONGSON_NORTH_BRIDGE_IRQ, ip6_action,
- IRQF_SHARED | IRQF_NO_THREAD, "cascade", NULL))
+ IRQF_SHARED | IRQF_NO_THREAD, "cascade", "cascade"))
pr_err("Failed to register north bridge cascade interrupt\n");
/* setup source bridge irq (i8259) */
if (request_irq(LOONGSON_SOUTH_BRIDGE_IRQ, no_action,
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
index baf0da8b4c98..0601a3f7f8f6 100644
--- a/arch/mips/pmcs-msp71xx/msp_time.c
+++ b/arch/mips/pmcs-msp71xx/msp_time.c
@@ -81,7 +81,7 @@ unsigned int get_c0_compare_int(void)
/* MIPS_MT modes may want timer for second VPE */
if ((get_current_vpe()) && !tim_installed) {
if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
- "timer", NULL))
+ "timer", "timer"))
pr_err("Failed to register timer interrupt\n");
tim_installed++;
}
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index ba966d62fb4b..1bfea4aae124 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -223,7 +223,7 @@ void __init sni_a20r_irq_init(void)
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
index 4a850ab03398..15080155cc9a 100644
--- a/arch/mips/sni/pcit.c
+++ b/arch/mips/sni/pcit.c
@@ -245,7 +245,7 @@ void __init sni_pcit_irq_init(void)
sni_hwint = sni_pcit_hwint;
change_c0_status(ST0_IM, IE_IRQ1);
if (request_irq(SNI_PCIT_INT_START + 6, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
@@ -260,7 +260,7 @@ void __init sni_pcit_cplus_irq_init(void)
sni_hwint = sni_pcit_hwint_cplus;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(MIPS_CPU_IRQ_BASE + 3, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
index ba1f2fc6a43e..2b4a6448b428 100644
--- a/arch/mips/sni/rm200.c
+++ b/arch/mips/sni/rm200.c
@@ -473,10 +473,10 @@ void __init sni_rm200_irq_init(void)
sni_hwint = sni_rm200_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler,
- IRQF_SHARED, "onboard ISA", NULL))
+ IRQF_SHARED, "onboard ISA", "onboard ISA"))
pr_err("Failed to register onboard ISA interrupt\n");
if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler,
- IRQF_SHARED, "ISA", NULL))
+ IRQF_SHARED, "ISA", "ISA"))
pr_err("Failed to register ISA interrupt\n");
}
Powered by blists - more mailing lists