linux-kernel - Re: [v1 2/3] media: ov8856: Add devicetree support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAG3jFyv8X=k=1EGMCHnSNqDaRBZ68pht42yDzc5hJPui0wdAjQ@mail.gmail.com>
Date:   Wed, 11 Mar 2020 14:32:30 +0100
From:   Robert Foss <robert.foss@...aro.org>
To:     Sakari Ailus <sakari.ailus@....fi>
Cc:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        ben.kao@...el.com, Rob Herring <robh+dt@...nel.org>,
        linux-media <linux-media@...r.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        linux-mediatek@...ts.infradead.org,
        Dongchun Zhu <dongchun.zhu@...iatek.com>,
        Tomasz Figa <tfiga@...omium.org>
Subject: Re: [v1 2/3] media: ov8856: Add devicetree support

Hey Sakari,

On Wed, 11 Mar 2020 at 12:49, Sakari Ailus <sakari.ailus@....fi> wrote:
>
> Hi Robert,
>
> On Tue, Mar 10, 2020 at 04:55:20PM +0100, Robert Foss wrote:
> > Hi Andy,
> >
> > On Tue, 10 Mar 2020 at 15:26, Andy Shevchenko
> > <andriy.shevchenko@...ux.intel.com> wrote:
> > >
> > > On Tue, Mar 10, 2020 at 02:46:02PM +0100, Robert Foss wrote:
> > > > Add devicetree match table, and enable ov8856_probe()
> > > > to initialize power, clocks and reset pins.
> > >
> > > ...
> > >
> > > > +#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
> > >
> > > Use ARRAY_SIZE() directly.
> >
> > Ack.
> >
> > >
> > > Have you seen Sakari's comments?
> > > Sakari, do I have déją vu or you indeed commented this driver?
> >
> > Yes, I may have missed some part of it, so please tell me if I have.
> >
> > There is a patchset floating around that implements a larger chunk of
> > functionality,
> > including a couple of new modes. This is based on that series.
>
> Please see earlier comments given against an earlier variant of this set.
> They're on LMML.
>
> >
> > >
> > > ...
> > >
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > >
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
> > >
> > > Yes, seems this one is inverted.
> > >
> > > ...
> > >
> > > > +{
> > > > +     gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> > > > +     regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> > > > +     clk_disable_unprepare(ov8856->xvclk);
> > > > +}
> > > > +
> > > > +
> > >
> > > One blank line is enough.
> > >
> > > ...
> > >
> > > > +     ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> > > > +     if (IS_ERR(ov8856->xvclk)) {
> > > > +             dev_err(&client->dev, "failed to get xvclk\n");
> > > > +             return -EINVAL;
> > > > +     }
> > >
> > > Previously it worked without clock provider, now you make a dependency.
> > >
> > > This won't work.
> >
> > So the ideal behavior would be to only use the xclk if it is provided?
>
> See e.g. the smiapp driver on how to do this so it continues to work on
> ACPI.

Thanks for the pointer!

>
> I think it'd be also appropriate to add the usleep() after lifting reset
> only if the reset GPIO is defined for the device.

Ack