| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8645c93547ae6c4e35633dbb09d9355219d9e3b2.camel@intel.com>
Date: Tue, 10 Mar 2020 18:59:47 -0700
From: Sai Praneeth Prakhya <sai.praneeth.prakhya@...el.com>
To: Reinette Chatre <reinette.chatre@...el.com>, shuah@...nel.org,
linux-kselftest@...r.kernel.org
Cc: tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
tony.luck@...el.com, babu.moger@....com, james.morse@....com,
ravi.v.shankar@...el.com, fenghua.yu@...el.com, x86@...nel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH V1 10/13] selftests/resctrl: Change Cache Allocation
Technology (CAT) test
Hi Reinette,
On Tue, 2020-03-10 at 15:14 -0700, Reinette Chatre wrote:
> Hi Sai,
>
> Not just specific to this patch but I think the prevalent use of global
> variables that are initialized/used or allocated/released from a variety
> of places within the code is creating traps. I seemed to have stumbled
> on a few during this review so far but it is hard to keep track of and I
> am not confident that I caught them all. Having the code be symmetrical
> (allocate and free from same area or initialize and use from same area)
> does help to avoid such complexity.
Sure! makes sense. I will try to wrap them up in some meaningful structures to
pass around functions and will see if everything still works as expected. If
not, I will comment why a particular variable needs to be global.
> This patch and the patch that follows are both quite large and difficult
> to keep track of all the collected changes. There seems to be
> opportunity for separating it into logical changes. Some of my comments
> may be just because I could not keep track of all that is changed at the
> same time.
Ok.. makes sense. The main reason this patch and the next patch are large
because they do two things
1. Remove previous CAT/CQM test case
2. Add new CAT/CQM test cases
Since the new test cases are not just logical extensions or fixing some bugs
in previous test cases, the patch might not be readable. I am thinking to
split this at-least like this
1. A patch to remove CAT test case
2. A patch to remove CQM test case
3. Patches that just add CAT and CQM (without other changes)
Please let me know if you think otherwise
> On 3/6/2020 7:40 PM, Sai Praneeth Prakhya wrote:
> > The present CAT test case, spawns two processes that run in two different
> > control groups with exclusive schemata and both the processes read a
> > buffer
> > from memory only once. Before reading the buffer, perf miss count is
> > cleared and perf miss count is calculated for the read. Since the
> > processes
> > are reading through the buffer only once and initially all the buffer is
> > in
> > memory perf miss count will always be the same regardless of the cache
> > size
> > allocated by CAT to these processes. So, the test isn't testing CAT. Fix
> > this issue by changing the CAT test case.
> >
> > The updated CAT test runs a "critical" process with exclusive schemata
> > that
> > reads a buffer (same as the size of allocated cache) multiple times
> > there-by utilizing the allocated cache and calculates perf miss rate for
>
> Transitioning the description from "perf miss count" to "perf miss rate"
> is subtle. It would be valuable to elaborate what is meant with "perf
> miss rate".
>
> > every read of the buffer. The average of this perf miss rate is saved.
> > This
> > value indicates the critical process self induced misses. Now, the
> > "critical" process runs besides a "noisy" neighbor that is reading a
> > buffer
> > that is 10 times the size of LLC and both the processes are in different
> > control groups with exclusive schematas. The average perf miss rate for
> > "critical" process is calculated again and compared with the earlier
> > value.
> > If the difference between both these values is greater than 5% it means
> > that "noisy" neighbor does have impact on "critical" process which means
> > CAT is not working as expected and hence the test fails.
> >
> > Reported-by: Reinette Chatre <reinette.chatre@...el.com>
> > Suggested-by: Tony Luck <tony.luck@...el.com>
> > Co-developed-by: Fenghua Yu <fenghua.yu@...el.com>
> > Signed-off-by: Fenghua Yu <fenghua.yu@...el.com>
> > Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@...el.com>
> > ---
> > tools/testing/selftests/resctrl/cache.c | 167 ++++++++-----
> > tools/testing/selftests/resctrl/cat_test.c | 312 ++++++++++++++-----
> > -----
> > tools/testing/selftests/resctrl/fill_buf.c | 33 ++-
> > tools/testing/selftests/resctrl/resctrl.h | 9 +-
> > tools/testing/selftests/resctrl/resctrl_tests.c | 2 +-
> > tools/testing/selftests/resctrl/resctrlfs.c | 34 ++-
> > 6 files changed, 352 insertions(+), 205 deletions(-)
> >
> > diff --git a/tools/testing/selftests/resctrl/cache.c
> > b/tools/testing/selftests/resctrl/cache.c
> > index be60d7d3f066..e30cdd7b851c 100644
> > --- a/tools/testing/selftests/resctrl/cache.c
> > +++ b/tools/testing/selftests/resctrl/cache.c
> > @@ -10,9 +10,9 @@ struct read_format {
> > } values[2];
> > };
> >
> > -static struct perf_event_attr pea_llc_miss;
> > +static struct perf_event_attr pea_llc_miss, pea_llc_access;
> > static struct read_format rf_cqm;
> > -static int fd_lm;
> > +static int fd_lm, fd_la;
> > char llc_occup_path[1024];
> >
> > static void initialize_perf_event_attr(void)
> > @@ -27,15 +27,30 @@ static void initialize_perf_event_attr(void)
> > pea_llc_miss.inherit = 1;
> > pea_llc_miss.exclude_guest = 1;
> > pea_llc_miss.disabled = 1;
> > +
> > + pea_llc_access.type = PERF_TYPE_HARDWARE;
> > + pea_llc_access.size = sizeof(struct perf_event_attr);
> > + pea_llc_access.read_format = PERF_FORMAT_GROUP;
> > + pea_llc_access.exclude_kernel = 1;
> > + pea_llc_access.exclude_hv = 1;
> > + pea_llc_access.exclude_idle = 1;
> > + pea_llc_access.exclude_callchain_kernel = 1;
> > + pea_llc_access.inherit = 1;
> > + pea_llc_access.exclude_guest = 1;
> > + pea_llc_access.disabled = 1;
> > +
>
> This initialization appears to duplicate the initialization done above.
> Perhaps this function could be a wrapper that calls an initialization
> function with pointer to perf_event_attr that initializes structure the
> same?
I did think about a wrapper but since pea_llc_access and pea_llc_miss are
global variables, I thought passing them as variables might not look good (why
do we want to pass a global variable?). I will try and see if I can make these
local variables.
> > }
> >
> > static void ioctl_perf_event_ioc_reset_enable(void)
> > {
> > ioctl(fd_lm, PERF_EVENT_IOC_RESET, 0);
> > ioctl(fd_lm, PERF_EVENT_IOC_ENABLE, 0);
> > +
> > + ioctl(fd_la, PERF_EVENT_IOC_RESET, 0);
> > + ioctl(fd_la, PERF_EVENT_IOC_ENABLE, 0);
> > }
>
> Here is more duplication.
Ok.. will fix it.
> >
> > -static int perf_event_open_llc_miss(pid_t pid, int cpu_no)
> > +static int perf_event_open_llc_miss_rate(pid_t pid, int cpu_no)
> > {
> > fd_lm = perf_event_open(&pea_llc_miss, pid, cpu_no, -1,
> > PERF_FLAG_FD_CLOEXEC);
> > @@ -45,29 +60,40 @@ static int perf_event_open_llc_miss(pid_t pid, int
> > cpu_no)
> > return -1;
> > }
> >
> > + fd_la = perf_event_open(&pea_llc_access, pid, cpu_no, fd_lm,
> > + PERF_FLAG_FD_CLOEXEC);
> > + if (fd_la == -1) {
> > + perror("Error opening member");
> > + ctrlc_handler(0, NULL, NULL);
> > + return -1;
>
> Should fd_lm not be closed on this error path?
That's right. will fix it.
> > + }
> > +
> > return 0;
> > }
> >
> > -static int initialize_llc_perf(void)
> > +static void initialize_llc_perf(void)
> > {
> > memset(&pea_llc_miss, 0, sizeof(struct perf_event_attr));
> > + memset(&pea_llc_access, 0, sizeof(struct perf_event_attr));
> > memset(&rf_cqm, 0, sizeof(struct read_format));
> >
> > - /* Initialize perf_event_attr structures for HW_CACHE_MISSES */
> > + /*
> > + * Initialize perf_event_attr structures for HW_CACHE_MISSES and
> > + * HW_CACHE_REFERENCES
> > + */
> > initialize_perf_event_attr();
> >
> > pea_llc_miss.config = PERF_COUNT_HW_CACHE_MISSES;
> > + pea_llc_access.config = PERF_COUNT_HW_CACHE_REFERENCES;
> >
> > - rf_cqm.nr = 1;
> > -
> > - return 0;
> > + rf_cqm.nr = 2;
> > }
> >
> > static int reset_enable_llc_perf(pid_t pid, int cpu_no)
> > {
> > int ret = 0;
> >
> > - ret = perf_event_open_llc_miss(pid, cpu_no);
> > + ret = perf_event_open_llc_miss_rate(pid, cpu_no);
> > if (ret < 0)
> > return ret;
> >
> > @@ -78,21 +104,21 @@ static int reset_enable_llc_perf(pid_t pid, int
> > cpu_no)
> > }
> >
> > /*
> > - * get_llc_perf: llc cache miss through perf events
> > - * @cpu_no: CPU number that the benchmark PID is binded to
> > + * get_llc_perf_miss_rate: llc cache miss rate through perf events
>
> Could "llc" be "LLC" to be consistent with below?
Sure! will fix it.
> > + * @cpu_no: CPU number that the benchmark PID is
> > binded to
> > *
> > - * Perf events like HW_CACHE_MISSES could be used to validate number of
> > - * cache lines allocated.
> > + * Perf events like HW_CACHE_MISSES and HW_CACHE_REFERENCES could be used
> > to
> > + * approximate LLc occupancy under controlled environment
>
> s/LLc/LLC/
Sure! my bad.
> > *
> > * Return: =0 on success. <0 on failure.
> > */
> > -static int get_llc_perf(unsigned long *llc_perf_miss)
> > +static int get_llc_perf_miss_rate(float *llc_perf_miss_rate)
> > {
> > - __u64 total_misses;
> > + __u64 total_misses, total_references;
> >
> > /* Stop counters after one span to get miss rate */
> > -
> > ioctl(fd_lm, PERF_EVENT_IOC_DISABLE, 0);
> > + ioctl(fd_la, PERF_EVENT_IOC_DISABLE, 0);
> >
> > if (read(fd_lm, &rf_cqm, sizeof(struct read_format)) == -1) {
> > perror("Could not get llc misses through perf");
> > @@ -100,11 +126,19 @@ static int get_llc_perf(unsigned long
> > *llc_perf_miss)
> > return -1;
> > }
> >
> > + if (read(fd_la, &rf_cqm, sizeof(struct read_format)) == -1) {
> > + perror("Could not get llc accesses through perf");
> > +
> > + return -1;
>
> It looks like the cleanup (closing of file descriptors) is omitted on
> this and the earlier error path.
True! Missed it, my bad! Will fix it.
> > + }
> > +
> > total_misses = rf_cqm.values[0].value;
> > + total_references = rf_cqm.values[1].value;
> >
> > close(fd_lm);
> > + close(fd_la);
> >
> > - *llc_perf_miss = total_misses;
> > + *llc_perf_miss_rate = ((float)total_misses / total_references) * 100;
> >
> > return 0;
> > }
> > @@ -176,15 +210,16 @@ static int print_results_cache(char *filename, int
> > bm_pid,
> >
> > int measure_cache_vals(struct resctrl_val_param *param, int bm_pid)
> > {
> > - unsigned long llc_perf_miss = 0, llc_occu_resc = 0, llc_value = 0;
> > + unsigned long llc_occu_resc = 0, llc_value = 0;
> > + float llc_perf_miss_rate = 0;
> > int ret;
> >
> > /* Measure cache miss from perf */
> > if (!strcmp(param->resctrl_val, "cat")) {
> > - ret = get_llc_perf(&llc_perf_miss);
> > + ret = get_llc_perf_miss_rate(&llc_perf_miss_rate);
> > if (ret < 0)
> > return ret;
> > - llc_value = llc_perf_miss;
> > + llc_value = llc_perf_miss_rate;
>
> What is the benefit of llc_perf_miss_rate being of type float?
Good catch.. not really (as I think of it now). I think, I made it float while
working on CQM test case with perf.
> > }
> >
> > /* Measure llc occupancy from resctrl */
> > @@ -202,66 +237,72 @@ int measure_cache_vals(struct resctrl_val_param
> > *param, int bm_pid)
> > }
> >
> > /*
> > - * cache_val: execute benchmark and measure LLC occupancy
> > resctrl
> > - * and perf cache miss for the benchmark
> > - * @param: parameters passed to cache_val()
> > + * setup_critical_process: Bind given pid to given cpu and write the pid
> > + * in requested resctrl FS location, set
> > schemata,
> > + * initialize perf LLC counters and also
> > initialize
> > + * fill buffer benchmark.
> > + * @pid: pid of the process
> > + * @param: Parameters passed to cache_val()
> > *
> > - * Return: 0 on success. non-zero on failure.
> > + * Return: 0 on success. non-zero on failure.
> > */
> > -int cat_val(struct resctrl_val_param *param)
> > +int setup_critical_process(pid_t pid, struct resctrl_val_param *param)
> > {
> > - int malloc_and_init_memory = 1, memflush = 1, operation = 0, ret = 0;
> > + int ret = 0;
> > char *resctrl_val = param->resctrl_val;
> > - pid_t bm_pid;
> > + char schemata[64];
> >
> > - if (strcmp(param->filename, "") == 0)
> > - sprintf(param->filename, "stdio");
> > + /* Taskset parent (critical process) to a specified cpu */
> > + ret = taskset_benchmark(pid, param->cpu_no);
> > + if (ret)
> > + return ret;
> >
> > - bm_pid = getpid();
> > + /* Write parent to specified con_mon grp, mon_grp in resctrl FS */
> > + ret = write_bm_pid_to_resctrl(pid, param->ctrlgrp, param->mongrp,
> > + resctrl_val);
> > + if (ret)
> > + return ret;
> >
> > - /* Taskset benchmark to specified cpu */
> > - ret = taskset_benchmark(bm_pid, param->cpu_no);
> > + sprintf(schemata, "%lx", param->mask);
> > + ret = write_schemata(param->ctrlgrp, schemata, param->cpu_no, "cat");
> > if (ret)
> > return ret;
> >
> > - /* Write benchmark to specified con_mon grp, mon_grp in resctrl FS */
> > - ret = write_bm_pid_to_resctrl(bm_pid, param->ctrlgrp, param->mongrp,
> > - resctrl_val);
> > + initialize_llc_perf();
> > +
> > + ret = init_buffer(param->span, 1, 1);
> > if (ret)
> > return ret;
> >
> > - if ((strcmp(resctrl_val, "cat") == 0)) {
> > - ret = initialize_llc_perf();
> > - if (ret)
> > - return ret;
> > - }
> > + return 0;
> > +}
> > +
> > +int run_critical_process(pid_t pid, struct resctrl_val_param *param)
> > +{
> > + int ret = 0;
> >
> > - /* Test runs until the callback setup() tells the test to stop. */
> > + /* Test runs until the callback setup() tells the test to stop */
> > while (1) {
> > - if (strcmp(resctrl_val, "cat") == 0) {
> > - ret = param->setup(param);
> > - if (ret) {
> > - ret = 0;
> > - break;
> > - }
> > - ret = reset_enable_llc_perf(bm_pid, param->cpu_no);
> > - if (ret)
> > - break;
> > -
> > - if (run_fill_buf(param->span, malloc_and_init_memory,
> > - memflush, operation, resctrl_val)) {
> > - fprintf(stderr, "Error-running fill
> > buffer\n");
> > - ret = -1;
> > - break;
> > - }
> > -
> > - sleep(1);
> > - ret = measure_cache_vals(param, bm_pid);
> > - if (ret)
> > - break;
> > - } else {
> > + ret = param->setup(param);
> > + if (ret) {
> > + ret = 0;
> > + break;
> > + }
> > +
> > + ret = reset_enable_llc_perf(pid, param->cpu_no);
>
> This is in a while(1) loop and it seems reset_enable_llc_perf() opens
> the file descriptors and reset then enable the counters. Would it not be
> more efficient to open the file descriptors outside of this while() loop
> and just reset/enable the counters within?
I did try this (i.e. open perf counters before while loop and in the loop just
reset them before every run) but I wasn't able to get readings from perf
counters. Hence, I started having open perf counters in the loop. But please
note that I didn't debug why that was the case and I tried it really long ago
(when I initially worked on this code, so things might have changed now). I
will try again and see if it works.
> > + if (ret)
> > + break;
> > +
> > + /* Read buffer once */
> > + if (use_buffer_once(0)) {
> > + fprintf(stderr, "Error-running fill buffer\n");
> > + ret = -1;
> > break;
> > }
>
> If I understand correctly reset_enable_llc_perf() will open the perf
> file descriptors and start the measurement and measure_cache_vals() will
> read from the file descriptors to obtain the measurements. It seems that
> if use_buffer_once() fails that the perf file descriptors need to be closed?
Yes, that's right. Will fix it.
>
> > +
> > + ret = measure_cache_vals(param, pid);
> > + if (ret)
> > + break;
> > }
> >
> > return ret;
> > diff --git a/tools/testing/selftests/resctrl/cat_test.c
> > b/tools/testing/selftests/resctrl/cat_test.c
> > index 046c7f285e72..f7a67f005fe5 100644
> > --- a/tools/testing/selftests/resctrl/cat_test.c
> > +++ b/tools/testing/selftests/resctrl/cat_test.c
> > @@ -11,70 +11,65 @@
> > #include "resctrl.h"
> > #include <unistd.h>
> >
> > -#define RESULT_FILE_NAME1 "result_cat1"
> > -#define RESULT_FILE_NAME2 "result_cat2"
> > -#define NUM_OF_RUNS 5
> > -#define MAX_DIFF_PERCENT 4
> > -#define MAX_DIFF 1000000
> > +#define RESULT_FILE_NAME "result_cat"
> > +#define NUM_OF_RUNS 10
> > +#define MAX_DIFF_PERCENT 5
> >
> > -int count_of_bits;
> > char cbm_mask[256];
> > -unsigned long long_mask;
> > -unsigned long cache_size;
> >
> > -/*
> > - * Change schemata. Write schemata to specified
> > - * con_mon grp, mon_grp in resctrl FS.
> > - * Run 5 times in order to get average values.
> > - */
> > +static unsigned long avg_llc_perf_miss_rate_single_thread;
> > +static unsigned long p1_mask, p2_mask;
>
> If these _have_ to be global variables, could they have more descriptive
> names?
Sure! Will fix them.
> > +static unsigned long cache_size;
> > +static pid_t noisy_pid;
> > +static int count_of_bits;
> > +
> > +/* Run 5 times in order to get average values */
>
> Seems like NUM_OF_RUNS above was changed to 10 so the above is no longer
> accurate. Perhaps just say "Run NUM_OF_RUNS times" ?
Sure!
> > static int cat_setup(struct resctrl_val_param *p)
> > {
> > - char schemata[64];
> > - int ret = 0;
> > -
> > /* Run NUM_OF_RUNS times */
> > if (p->num_of_runs >= NUM_OF_RUNS)
> > return -1;
> >
> > - if (p->num_of_runs == 0) {
> > - sprintf(schemata, "%lx", p->mask);
> > - ret = write_schemata(p->ctrlgrp, schemata, p->cpu_no,
> > - p->resctrl_val);
> > - }
> > p->num_of_runs++;
> > -
> > - return ret;
> > + return 0;
> > }
>
> All of this complication does not seem to be necessary. This cat_setup()
> does not actually do any setup ... it seems to only exist to be able to
> break out of an infinite loop. Why not just eliminate this function and
> just run the loop within run_critical_process() NUM_OF_RUNS times?
Makes sense. Will change it.
> >
> > -static void show_cache_info(unsigned long sum_llc_perf_miss, int
> > no_of_bits,
> > - unsigned long span)
> > +static void show_cache_info(unsigned long sum_llc_perf_miss_rate,
> > + int no_of_bits, unsigned long span)
> > {
> > - unsigned long allocated_cache_lines = span / 64;
> > - unsigned long avg_llc_perf_miss = 0;
> > - float diff_percent;
> > + unsigned long avg_llc_perf_miss_rate = 0, diff_percent = 0;
> > +
> > + avg_llc_perf_miss_rate = sum_llc_perf_miss_rate / (NUM_OF_RUNS - 1);
> > + if (!noisy_pid) {
> > + avg_llc_perf_miss_rate_single_thread = avg_llc_perf_miss_rate;
> > + return;
> > + }
> >
> > - avg_llc_perf_miss = sum_llc_perf_miss / (NUM_OF_RUNS - 1);
> > - diff_percent = ((float)allocated_cache_lines - avg_llc_perf_miss) /
> > - allocated_cache_lines * 100;
> > + diff_percent = labs(avg_llc_perf_miss_rate -
> > + avg_llc_perf_miss_rate_single_thread);
> >
> > - printf("%sok CAT: cache miss rate within %d%%\n",
> > - !is_amd && abs((int)diff_percent) > MAX_DIFF_PERCENT ?
> > + printf("%sok CAT: cache miss rate difference within %d%%\n",
> > + !is_amd && diff_percent > MAX_DIFF_PERCENT ?
> > "not " : "", MAX_DIFF_PERCENT);
> > - tests_run++;
> > - printf("# Percent diff=%d\n", abs((int)diff_percent));
> > printf("# Number of bits: %d\n", no_of_bits);
> > - printf("# Avg_llc_perf_miss: %lu\n", avg_llc_perf_miss);
> > - printf("# Allocated cache lines: %lu\n", allocated_cache_lines);
> > + printf("# Buffer size: %lu\n", span);
> > + printf("# Avg_llc_perf_miss_rate without noisy process: %lu%%\n",
> > + avg_llc_perf_miss_rate_single_thread);
> > + printf("# Avg_llc_perf_miss_rate with noisy process: %lu%%\n",
> > + avg_llc_perf_miss_rate);
> > + printf("# Percent diff: %lu\n", diff_percent);
> > + tests_run++;
> > }
> >
> > static int check_results(struct resctrl_val_param *param)
> > {
> > char *token_array[8], temp[512];
> > - unsigned long sum_llc_perf_miss = 0;
> > + unsigned long sum_llc_perf_miss_rate = 0;
> > int runs = 0, no_of_bits = 0;
> > FILE *fp;
> >
> > - printf("# Checking for pass/fail\n");
> > + if (noisy_pid)
> > + printf("# Checking for pass/fail\n");
> > fp = fopen(param->filename, "r");
> > if (!fp) {
> > perror("# Cannot open file");
> > @@ -90,37 +85,107 @@ static int check_results(struct resctrl_val_param
> > *param)
> > token_array[fields++] = token;
> > token = strtok(NULL, ":\t");
> > }
> > +
> > /*
> > * Discard the first value which is inaccurate due to
> > monitoring
> > * setup transition phase.
> > */
> > - if (runs > 0)
> > - sum_llc_perf_miss += strtoul(token_array[3], NULL, 0);
> > runs++;
> > + if (runs == 1)
> > + continue;
> > +
> > + sum_llc_perf_miss_rate += strtoul(token_array[3], NULL, 0);
> > }
> >
> > fclose(fp);
> > no_of_bits = count_bits(param->mask);
> > -
> > - show_cache_info(sum_llc_perf_miss, no_of_bits, param->span);
> > + show_cache_info(sum_llc_perf_miss_rate, no_of_bits, param->span);
> >
> > return 0;
> > }
> >
> > void cat_test_cleanup(void)
> > {
> > - remove(RESULT_FILE_NAME1);
> > - remove(RESULT_FILE_NAME2);
> > + remove(RESULT_FILE_NAME);
> > +}
> > +
> > +static int prepare_masks_for_two_processes(int no_of_bits, char
> > *cache_type)
>
> It would be valuable to include comments that describe the goal of these
> masks. Some questions that may be asked when seeing this function ...
> Why are two masks needed? What are the differences between them? How are
> they intended to be used?
Ok.. makes sense. Will add comments. Just to keep things clear here (for
others), the two masks are exclusive masks. The masks are exclusive because no
other process should cause interference for the critical process.
> > +{
> > + int ret, i;
> > + unsigned long long_mask, shareable_mask;
> > +
> > + /* Get default cbm mask for L3/L2 cache */
> > + ret = get_cbm_mask(cache_type);
> > + if (ret)
> > + return ret;
> > +
> > + /* Get max number of bits from default cbm mask */
> > + long_mask = strtoul(cbm_mask, NULL, 16);
> > + count_of_bits = count_bits(long_mask);
> > +
> > + /*
> > + * Max limit is count_of_bits - 1 because we need exclusive masks for
> > + * the two processes. So, the last saved bit will be used by the other
> > + * process.
> > + */
> > + if (no_of_bits < 1 || no_of_bits > count_of_bits - 1) {
> > + printf("Invalid input value for no_of_bits 'n'\n");
> > + printf("Please Enter value in range 1 to %d\n",
> > + count_of_bits - 1);
> > + return -1;
> > + }
> > +
> > + ret = get_shareable_mask(cache_type, &shareable_mask);
> > + if (ret)
> > + return ret;
> > +
> > + /* Prepare cbm mask without any shareable bits */
> > + for (i = 0; i < no_of_bits; i++) {
> > + p1_mask <<= 1;
> > + p1_mask |= 1;
> > + }
> > + p1_mask = ~shareable_mask & p1_mask;
> > + p2_mask = ~p1_mask & long_mask;
> > +
> > + return 0;
> > }
> >
> > -int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
> > +static int start_noisy_process(pid_t pid, int sibling_cpu_no)
> > {
> > - unsigned long l_mask, l_mask_1;
> > - int ret, pipefd[2], sibling_cpu_no;
> > - char pipe_message;
> > - pid_t bm_pid;
> > + int ret;
> > + unsigned long buf_size = cache_size * 10;
> >
> > - cache_size = 0;
> > + /* Taskset noisy process to specified cpu */
> > + ret = taskset_benchmark(pid, sibling_cpu_no);
> > + if (ret)
> > + return ret;
> > +
> > + /* Write noisy process to root con_mon grp in resctrl FS */
> > + ret = write_bm_pid_to_resctrl(pid, "", "", "cat");
> > + if (ret)
> > + return ret;
> > +
> > + /*
> > + * Passing 'cat' will not loop around buffer forever, hence don't pass
> > + * test name
> > + */
> > + ret = run_fill_buf(buf_size, 1, 1, 0, "");
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +int cat_perf_miss_val(int cpu_no, int no_of_bits, char *cache_type)
> > +{
> > + int ret, sibling_cpu_no;
> > + unsigned long buf_size;
> > + pid_t critical_pid;
> > + char schemata[64];
> > +
> > + noisy_pid = 0;
> > + critical_pid = getpid();
> > + printf("# critical_pid: %d\n", critical_pid);
> >
> > ret = remount_resctrlfs(true);
> > if (ret)
> > @@ -129,77 +194,43 @@ int cat_perf_miss_val(int cpu_no, int n, char
> > *cache_type)
> > if (!validate_resctrl_feature_request("cat"))
> > return -1;
> >
> > - /* Get default cbm mask for L3/L2 cache */
> > - ret = get_cbm_mask(cache_type);
> > + ret = prepare_masks_for_two_processes(no_of_bits, cache_type);
> > if (ret)
> > return ret;
>
> Global variables p1_mask and p2_mask are initialized from above and only
> used in this function. Would it not be simpler to just initialize and
> use them as local variables here?
Makes sense. Will change them.
> >
> > - long_mask = strtoul(cbm_mask, NULL, 16);
> > + /*
> > + * Change root con_mon grp schemata to be exclusive of critical
> > process
> > + * schemata to avoid any interference
> > + */
> > + sprintf(schemata, "%lx", p2_mask);
> > + ret = write_schemata("", schemata, cpu_no, "cat");
> > + if (ret)
> > + return ret;
> >
> > /* Get L3/L2 cache size */
> > ret = get_cache_size(cpu_no, cache_type, &cache_size);
> > if (ret)
> > return ret;
> > - printf("cache size :%lu\n", cache_size);
> > -
> > - /* Get max number of bits from default-cabm mask */
> > - count_of_bits = count_bits(long_mask);
> > -
> > - if (n < 1 || n > count_of_bits - 1) {
> > - printf("Invalid input value for no_of_bits n!\n");
> > - printf("Please Enter value in range 1 to %d\n",
> > - count_of_bits - 1);
> > - return -1;
> > - }
> > -
> > - /* Get core id from same socket for running another thread */
> > - sibling_cpu_no = get_core_sibling(cpu_no);
> > - if (sibling_cpu_no < 0)
> > - return -1;
> > + printf("# cache size: %lu\n", cache_size);
> >
> > + buf_size = cache_size * ((float)(no_of_bits) / count_of_bits);
>
> Is all the parentheses and float necessary? The number of bits with
> which the cache can be partitioned should divide the cache evenly, no?
> How about:
> buf_size = cache_size / count_of_bits * no_of_bits
Makes sense. Will fix it.
> > struct resctrl_val_param param = {
> > .resctrl_val = "cat",
> > .cpu_no = cpu_no,
> > .mum_resctrlfs = 0,
> > .setup = cat_setup,
> > + .ctrlgrp = "c1",
> > + .filename = RESULT_FILE_NAME,
> > + .mask = p1_mask,
> > + .num_of_runs = 0,
> > + .span = buf_size
> > };
> >
> > - l_mask = long_mask >> n;
> > - l_mask_1 = ~l_mask & long_mask;
> > -
> > - /* Set param values for parent thread which will be allocated bitmask
> > - * with (max_bits - n) bits
> > - */
> > - param.span = cache_size * (count_of_bits - n) / count_of_bits;
> > - strcpy(param.ctrlgrp, "c2");
> > - strcpy(param.mongrp, "m2");
> > - strcpy(param.filename, RESULT_FILE_NAME2);
> > - param.mask = l_mask;
> > - param.num_of_runs = 0;
> > -
> > - if (pipe(pipefd)) {
> > - perror("# Unable to create pipe");
> > - return errno;
> > - }
> > -
> > - bm_pid = fork();
> > -
> > - /* Set param values for child thread which will be allocated bitmask
> > - * with n bits
> > - */
> > - if (bm_pid == 0) {
> > - param.mask = l_mask_1;
> > - strcpy(param.ctrlgrp, "c1");
> > - strcpy(param.mongrp, "m1");
> > - param.span = cache_size * n / count_of_bits;
> > - strcpy(param.filename, RESULT_FILE_NAME1);
> > - param.num_of_runs = 0;
> > - param.cpu_no = sibling_cpu_no;
> > - }
> > -
> > - remove(param.filename);
> > + ret = setup_critical_process(critical_pid, ¶m);
> > + if (ret)
> > + return ret;
> >
> > - ret = cat_val(¶m);
> > + ret = run_critical_process(critical_pid, ¶m);
> > if (ret)
> > return ret;
> >
> > @@ -207,38 +238,51 @@ int cat_perf_miss_val(int cpu_no, int n, char
> > *cache_type)
> > if (ret)
> > return ret;
> >
> > - if (bm_pid == 0) {
> > - /* Tell parent that child is ready */
> > - close(pipefd[0]);
> > - pipe_message = 1;
> > - if (write(pipefd[1], &pipe_message, sizeof(pipe_message)) <
> > - sizeof(pipe_message)) {
> > - close(pipefd[1]);
> > - perror("# failed signaling parent process");
> > - return errno;
> > - }
> > + printf("# ran critical process without noisy process\n");
> >
> > - close(pipefd[1]);
> > - while (1)
> > - ;
> > + /*
> > + * Results from first run of critical process are already calculated
> > + * and stored in 'avg_llc_perf_miss_single_thread'. Hence, delete the
> > + * file, so that it could be reused for second run.
> > + */
> > + cat_test_cleanup();
> > +
> > + /* Get core id from same socket for running noisy process */
> > + sibling_cpu_no = get_core_sibling(cpu_no);
> > + if (sibling_cpu_no < 0)
> > + return -1;
> > +
> > + noisy_pid = fork();
> > + if (noisy_pid == 0) {
>
> This is confusing. Before the above "noisy_pid == 0" meant that we are
> dealing with the critical process. Now this changes, "noisy_pid == 0"
> means that we are dealing with the noisy process ... and below
> "noisy_pid != 0" means we are dealing with the critical process?
Sorry! for the confusion. It's because I have used the same variable
"noisy_pid" for two different purposes.
1. To check if "noisy" process is started or not (i.e. before fork())
2. To store the pid of "noisy" process (after fork())
I will use different variables so that the code might be clear.
> > + /*
> > + * Child is the noisy_process which runs in root con_mon grp
> > by
> > + * default and hence no need to write pid to resctrl FS.
> > + * Schemata for root con_mon grp is also set above.
> > + */
> > + printf("# noisy_pid: %d\n", getpid());
> > + ret = start_noisy_process(getpid(), sibling_cpu_no);
> > + exit(EXIT_SUCCESS);
> > + } else if (noisy_pid == -1) {
> > + return -1;
> > } else {
> > - /* Parent waits for child to be ready. */
> > - close(pipefd[1]);
> > - pipe_message = 0;
> > - while (pipe_message != 1) {
> > - if (read(pipefd[0], &pipe_message,
> > - sizeof(pipe_message)) < sizeof(pipe_message))
> > {
> > - perror("# failed reading from child process");
> > - break;
> > - }
> > - }
> > - close(pipefd[0]);
> > - kill(bm_pid, SIGKILL);
> > - }
> > + /*
> > + * Parent runs again. Sleep for a second here so that noisy
> > + * process gets to run before critical process
> > + */
> > + sleep(1);
> > + param.num_of_runs = 0;
> > + ret = run_critical_process(critical_pid, ¶m);
> > + if (ret)
> > + return ret;
> >
> > - cat_test_cleanup();
> > - if (bm_pid)
> > - umount_resctrlfs();
> > + ret = check_results(¶m);
> > + if (ret)
> > + return ret;
> > +
> > + ret = kill(noisy_pid, SIGKILL);
> > + if (ret)
> > + printf("Failed to kill noisy_pid\n");
> > + }
> >
> > return 0;
> > }
> > diff --git a/tools/testing/selftests/resctrl/fill_buf.c
> > b/tools/testing/selftests/resctrl/fill_buf.c
> > index 204ae8870a32..0500dab90b2e 100644
> > --- a/tools/testing/selftests/resctrl/fill_buf.c
> > +++ b/tools/testing/selftests/resctrl/fill_buf.c
> > @@ -139,7 +139,6 @@ static int fill_cache_write(char *resctrl_val)
> > return 0;
> > }
> >
> > -static
> > int init_buffer(unsigned long long buf_size, int malloc_and_init, int
> > memflush)
> > {
> > unsigned char *start_ptr, *end_ptr;
> > @@ -177,7 +176,33 @@ int init_buffer(unsigned long long buf_size, int
> > malloc_and_init, int memflush)
> > return 0;
> > }
> >
> > -static int use_buffer_forever(int op, char *resctrl_val)
> > +int use_buffer_once(int op)
> > +{
> > + FILE *fp;
> > + int ret = 0;
> > +
> > + if (op == 0) {
> > + ret = fill_one_span_read();
> > +
> > + /* Consume result so that reading memory is not optimized */
> > + fp = fopen("/dev/null", "w");
> > + if (!fp)
> > + perror("Unable to write to /dev/null");
> > + fprintf(fp, "Sum: %d ", ret);
> > + fclose(fp);
> > + ret = 0;
> > + } else {
> > + fill_one_span_write();
> > + }
> > +
> > + if (ret) {
> > + printf("\n Error in fill cache read/write...\n");
> > + return -1;
> > + }
> > + return 0;
> > +}
> > +
> > +int use_buffer_forever(int op, char *resctrl_val)
> > {
> > int ret;
> >
> > @@ -187,7 +212,7 @@ static int use_buffer_forever(int op, char
> > *resctrl_val)
> > ret = fill_cache_write(resctrl_val);
> >
> > if (ret) {
> > - printf("\n Errror in fill cache read/write...\n");
> > + printf("\n Error in fill cache read/write...\n");
>
> Please remove this hunk. Two reasons: (1) only one logical change per
> patch, (2) a fix for this was already submitted upstream.
Sure! makes sense. I wasn't aware that there is already a fix for this.
> > return -1;
> > }
> >
> > @@ -228,7 +253,7 @@ int run_fill_buf(unsigned long span, int
> > malloc_and_init_memory,
> > ret = fill_cache(cache_size, malloc_and_init_memory, memflush, op,
> > resctrl_val);
> > if (ret) {
> > - printf("\n Errror in fill cache\n");
> > + printf("\n Error in fill cache\n");
>
> Same comment as above.
Ok
> > return -1;
> > }
> >
> > diff --git a/tools/testing/selftests/resctrl/resctrl.h
> > b/tools/testing/selftests/resctrl/resctrl.h
> > index e320e79bc4d4..79148cbbd7a4 100644
> > --- a/tools/testing/selftests/resctrl/resctrl.h
> > +++ b/tools/testing/selftests/resctrl/resctrl.h
> > @@ -27,7 +27,7 @@
> > #define MB (1024 * 1024)
> > #define RESCTRL_PATH "/sys/fs/resctrl"
> > #define PHYS_ID_PATH "/sys/devices/system/cpu/cpu"
> > -#define CBM_MASK_PATH "/sys/fs/resctrl/info"
> > +#define INFO_PATH "/sys/fs/resctrl/info"
> >
> > #define PARENT_EXIT(err_msg) \
> > do { \
> > @@ -84,6 +84,9 @@ int write_bm_pid_to_resctrl(pid_t bm_pid, char *ctrlgrp,
> > char *mongrp,
> > char *resctrl_val);
> > int perf_event_open(struct perf_event_attr *hw_event, pid_t pid, int cpu,
> > int group_fd, unsigned long flags);
> > +int init_buffer(unsigned long long buf_size, int malloc_and_init, int
> > memflush);
> > +int use_buffer_once(int op);
> > +int use_buffer_forever(int op, char *resctrl_val);
> > int run_fill_buf(unsigned long span, int malloc_and_init_memory, int
> > memflush,
> > int op, char *resctrl_va);
> > int resctrl_val(char **benchmark_cmd, struct resctrl_val_param *param);
> > @@ -93,9 +96,11 @@ void mbm_test_cleanup(void);
> > int mba_schemata_change(int cpu_no, char *bw_report, char
> > **benchmark_cmd);
> > void mba_test_cleanup(void);
> > int get_cbm_mask(char *cache_type);
> > +int get_shareable_mask(char *cache_type, unsigned long *shareable_mask);
> > int get_cache_size(int cpu_no, char *cache_type, unsigned long
> > *cache_size);
> > void ctrlc_handler(int signum, siginfo_t *info, void *ptr);
> > -int cat_val(struct resctrl_val_param *param);
> > +int setup_critical_process(pid_t pid, struct resctrl_val_param *param);
> > +int run_critical_process(pid_t pid, struct resctrl_val_param *param);
> > void cat_test_cleanup(void);
> > int cat_perf_miss_val(int cpu_no, int no_of_bits, char *cache_type);
> > int cqm_resctrl_val(int cpu_no, int n, char **benchmark_cmd);
> > diff --git a/tools/testing/selftests/resctrl/resctrl_tests.c
> > b/tools/testing/selftests/resctrl/resctrl_tests.c
> > index 84a436e0775c..60db128312a6 100644
> > --- a/tools/testing/selftests/resctrl/resctrl_tests.c
> > +++ b/tools/testing/selftests/resctrl/resctrl_tests.c
> > @@ -192,8 +192,8 @@ int main(int argc, char **argv)
> > printf("# Starting CAT test ...\n");
> > res = cat_perf_miss_val(cpu_no, no_of_bits, "L3");
> > printf("%sok CAT: test\n", res ? "not " : "");
> > - tests_run++;
> > cat_test_cleanup();
> > + tests_run++;
> > }
>
> What is the benefit of this change?
Just wanted to keep the pattern same for all the test cases i.e. "tests_run"
increments last.
> If you want to do cleanup like this
> then it would be great to separate it into a different patch to keep
> logical changes together and make this patch easier to review.
Ok.. makes sense.
> >
> > printf("1..%d\n", tests_run);
> > diff --git a/tools/testing/selftests/resctrl/resctrlfs.c
> > b/tools/testing/selftests/resctrl/resctrlfs.c
> > index 465faaad3239..52452bb0178a 100644
> > --- a/tools/testing/selftests/resctrl/resctrlfs.c
> > +++ b/tools/testing/selftests/resctrl/resctrlfs.c
> > @@ -215,7 +215,7 @@ int get_cbm_mask(char *cache_type)
> > char cbm_mask_path[1024];
> > FILE *fp;
> >
> > - sprintf(cbm_mask_path, "%s/%s/cbm_mask", CBM_MASK_PATH, cache_type);
> > + sprintf(cbm_mask_path, "%s/%s/cbm_mask", INFO_PATH, cache_type);
>
> This could also be a separate patch.
Ok.
> >
> > fp = fopen(cbm_mask_path, "r");
> > if (!fp) {
> > @@ -235,6 +235,38 @@ int get_cbm_mask(char *cache_type)
> > }
> >
> > /*
> > + * get_shareable_mask - Get shareable mask from shareable_bits for given
> > cache
> > + * @cache_type: Cache level L2/L3
> > + * @shareable_mask: Mask is returned as unsigned long value
> > + *
> > + * Return: = 0 on success, < 0 on failure.
> > + */
> > +int get_shareable_mask(char *cache_type, unsigned long *shareable_mask)
> > +{
> > + char shareable_bits_file[1024];
> > + FILE *fp;
> > +
> > + sprintf(shareable_bits_file, "%s/%s/shareable_bits", INFO_PATH,
> > + cache_type);
> > +
> > + fp = fopen(shareable_bits_file, "r");
> > + if (!fp) {
> > + perror("Failed to open shareable_bits file");
> > +
> > + return -1;
> > + }
> > + if (fscanf(fp, "%lx", shareable_mask) <= 0) {
> > + perror("Could not get shareable bits");
> > + fclose(fp);
> > +
> > + return -1;
> > + }
> > + fclose(fp);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > * get_core_sibling - Get sibling core id from the same socket for given
> > CPU
> > * @cpu_no: CPU number
> > *
> >
>
> Apart from the code comments I do remain interested in how this test
> performs on different systems under different load to ensure that the
> hardware prefetcher does not interfere with the results. If you do have
> assumptions/requirements in this area ("This has to run on an idle
> system") then it should be added to at least the README.
Sure! I will add the assumption to README and will also get data with/without
H/W prefetchers.
> As a sidenote when I looked at the README it seems to not take these
> cache tests into account ... it reads "Currently it supports Memory
> Bandwidth Monitoring test and Memory Bandwidth Allocation test on Intel
> RDT hardware. More tests will be added in the future."
Ok. Will update the README file.
Regards,
Sai
Powered by blists - more mailing lists