| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 12 Mar 2020 00:19:49 -0700
From: Gwendal Grignou <gwendal@...omium.org>
To: bleung@...omium.org, enric.balletbo@...labora.com,
groeck@...omium.org
Cc: linux-kernel@...r.kernel.org,
Gwendal Grignou <gwendal@...omium.org>
Subject: [PATCH v2] platform/chrome: Update cros_ec_commands.h to latest ec commands
Update from EC code base
https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h
Formatted to match kernel syntax.
Add new commands:
EC_CMD_RAND_NUM : Request random numbers.
EC_CMD_RWSIG_INFO: Key information
EC_CMD_MKBP_WAKE_MASK: Define wake up mask for MKBP events.
EC_CMD_LOCATE_CHIP: For power delivery
EC_CMD_REBOOT_AP_ON_G3: For testing purposes
EC_CMD_GET_PD_PORT_CAPS: Get PD device information
EC_CMD_FP_READ_MATCH_SECRET: Used for Finger print sensor management.
Update commands:
EC_CMD_POWER_INFO (v0 was not used in the kernel)
EC_CMD_MOTION_SENSE_CMD (Add calibration mode, online calibration info).
Add new Mems sensors.
Signed-off-by: Gwendal Grignou <gwendal@...omium.org>
---
Changes since v1: Include limits.h as U16_MAX is used.
.../linux/platform_data/cros_ec_commands.h | 605 ++++++++++++++++--
1 file changed, 555 insertions(+), 50 deletions(-)
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 69210881ebac8..db23bcc464dc1 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -15,9 +15,10 @@
-
#define BUILD_ASSERT(_cond)
+#include <linux/limits.h>
+
/*
* Current version of this protocol
*
@@ -400,7 +401,7 @@
* parent structure that the alignment will still be true given the packing of
* the parent structure. This is particularly important if the sub-structure
* will be passed as a pointer to another function, since that function will
- * not know about the misaligment caused by the parent structure's packing.
+ * not know about the misalignment caused by the parent structure's packing.
*
* Also be very careful using __packed - particularly when nesting non-packed
* structures inside packed ones. In fact, DO NOT use __packed directly;
@@ -456,8 +457,7 @@
(EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING)
/*
- * Host command response codes (16-bit). Note that response codes should be
- * stored in a uint16_t rather than directly in a value of this type.
+ * Host command response codes (16-bit).
*/
enum ec_status {
EC_RES_SUCCESS = 0,
@@ -481,7 +481,10 @@ enum ec_status {
EC_RES_INVALID_HEADER_CRC = 18, /* Header CRC invalid */
EC_RES_INVALID_DATA_CRC = 19, /* Data CRC invalid */
EC_RES_DUP_UNAVAILABLE = 20, /* Can't resend response */
-};
+
+ EC_RES_MAX = U16_MAX /**< Force enum to be 16 bits */
+} __packed;
+BUILD_ASSERT(sizeof(enum ec_status) == sizeof(uint16_t));
/*
* Host event codes. Note these are 1-based, not 0-based, because ACPI query
@@ -550,7 +553,12 @@ enum host_event_code {
/* EC desires to change state of host-controlled USB mux */
EC_HOST_EVENT_USB_MUX = 28,
- /* TABLET/LAPTOP mode or detachable base attach/detach event */
+ /*
+ * The device has changed "modes". This can be one of the following:
+ *
+ * - TABLET/LAPTOP mode
+ * - detachable base attach/detach event
+ */
EC_HOST_EVENT_MODE_CHANGE = 29,
/* Keyboard recovery combo with hardware reinitialization */
@@ -963,10 +971,14 @@ struct ec_response_hello {
/* Get version number */
#define EC_CMD_GET_VERSION 0x0002
-enum ec_current_image {
+
+enum ec_image {
EC_IMAGE_UNKNOWN = 0,
EC_IMAGE_RO,
- EC_IMAGE_RW
+ EC_IMAGE_RW,
+ EC_IMAGE_RW_A = EC_IMAGE_RW,
+ EC_IMAGE_RO_B,
+ EC_IMAGE_RW_B
};
/**
@@ -974,7 +986,7 @@ enum ec_current_image {
* @version_string_ro: Null-terminated RO firmware version string.
* @version_string_rw: Null-terminated RW firmware version string.
* @reserved: Unused bytes; was previously RW-B firmware version string.
- * @current_image: One of ec_current_image.
+ * @current_image: One of ec_image.
*/
struct ec_response_get_version {
char version_string_ro[32];
@@ -1679,6 +1691,82 @@ struct ec_params_flash_select {
} __ec_align4;
+/**
+ * Request random numbers to be generated and returned.
+ * Can be used to test the random number generator is truly random.
+ * See https://csrc.nist.gov/publications/detail/sp/800-22/rev-1a/final and
+ * https://webhome.phy.duke.edu/~rgb/General/dieharder.php.
+ */
+#define EC_CMD_RAND_NUM 0x001A
+#define EC_VER_RAND_NUM 0
+
+struct ec_params_rand_num {
+ uint16_t num_rand_bytes; /**< num random bytes to generate */
+} __ec_align4;
+
+struct ec_response_rand_num {
+ uint8_t rand[0]; /**< generated random numbers */
+} __ec_align4;
+
+BUILD_ASSERT(sizeof(struct ec_response_rand_num) == 0);
+
+/**
+ * Get information about the key used to sign the RW firmware.
+ * For more details on the fields, see "struct vb21_packed_key".
+ */
+#define EC_CMD_RWSIG_INFO 0x001B
+#define EC_VER_RWSIG_INFO 0
+
+#define VBOOT2_KEY_ID_BYTES 20
+
+
+struct ec_response_rwsig_info {
+ /**
+ * Signature algorithm used by the key
+ * (enum vb2_signature_algorithm).
+ */
+ uint16_t sig_alg;
+
+ /**
+ * Hash digest algorithm used with the key
+ * (enum vb2_hash_algorithm).
+ */
+ uint16_t hash_alg;
+
+ /** Key version. */
+ uint32_t key_version;
+
+ /** Key ID (struct vb2_id). */
+ uint8_t key_id[VBOOT2_KEY_ID_BYTES];
+
+ uint8_t key_is_valid;
+
+ /** Alignment padding. */
+ uint8_t reserved[3];
+} __ec_align4;
+
+BUILD_ASSERT(sizeof(struct ec_response_rwsig_info) == 32);
+
+/**
+ * Get information about the system, such as reset flags, locked state, etc.
+ */
+#define EC_CMD_SYSINFO 0x001C
+#define EC_VER_SYSINFO 0
+
+enum sysinfo_flags {
+ SYSTEM_IS_LOCKED = BIT(0),
+ SYSTEM_IS_FORCE_LOCKED = BIT(1),
+ SYSTEM_JUMP_ENABLED = BIT(2),
+ SYSTEM_JUMPED_TO_CURRENT_IMAGE = BIT(3),
+ SYSTEM_REBOOT_AT_SHUTDOWN = BIT(4)
+};
+
+struct ec_response_sysinfo {
+ uint32_t reset_flags; /**< EC_RESET_FLAG_* flags */
+ uint32_t current_image; /**< enum ec_current_image */
+ uint32_t flags; /**< enum sysinfo_flags */
+} __ec_align4;
+
/*****************************************************************************/
/* PWM commands */
@@ -2283,7 +2371,7 @@ enum motionsense_command {
/*
* Sensor Offset command is a setter/getter command for the offset
- * used for calibration.
+ * used for factory calibration.
* The offsets can be calculated by the host, or via
* PERFORM_CALIB command.
*/
@@ -2328,6 +2416,11 @@ enum motionsense_command {
*/
MOTIONSENSE_CMD_SENSOR_SCALE = 18,
+ /*
+ * Read the current online calibration values (if available).
+ */
+ MOTIONSENSE_CMD_ONLINE_CALIB_READ = 19,
+
/* Number of motionsense sub-commands. */
MOTIONSENSE_NUM_CMDS
};
@@ -2342,6 +2435,7 @@ enum motionsensor_type {
MOTIONSENSE_TYPE_ACTIVITY = 5,
MOTIONSENSE_TYPE_BARO = 6,
MOTIONSENSE_TYPE_SYNC = 7,
+ MOTIONSENSE_TYPE_LIGHT_RGB = 8,
MOTIONSENSE_TYPE_MAX,
};
@@ -2375,6 +2469,9 @@ enum motionsensor_chip {
MOTIONSENSE_CHIP_LSM6DS3 = 17,
MOTIONSENSE_CHIP_LSM6DSO = 18,
MOTIONSENSE_CHIP_LNG2DM = 19,
+ MOTIONSENSE_CHIP_TCS3400 = 20,
+ MOTIONSENSE_CHIP_LIS2DW12 = 21,
+ MOTIONSENSE_CHIP_LIS2DWL = 22,
MOTIONSENSE_CHIP_MAX,
};
@@ -2407,6 +2504,12 @@ struct ec_response_motion_sensor_data {
};
} __ec_todo_packed;
+/* Response to AP reporting calibration data for a given sensor. */
+struct ec_response_online_calibration_data {
+ /** The calibration values. */
+ int16_t data[3];
+};
+
/* Note: used in ec_response_get_next_data */
struct ec_response_motion_sense_fifo_info {
/* Size of the fifo */
@@ -2517,12 +2620,19 @@ struct ec_params_motion_sense {
/*
* Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA
- * and MOTIONSENSE_CMD_PERFORM_CALIB.
*/
struct __ec_todo_unpacked {
uint8_t sensor_num;
- } info, info_3, data, fifo_flush, perform_calib,
- list_activities;
+ } info, info_3, info_4, data, fifo_flush, list_activities;
+
+ /*
+ * Used for MOTIONSENSE_CMD_PERFORM_CALIB:
+ * Allow entering/exiting the calibration mode.
+ */
+ struct __ec_todo_unpacked {
+ uint8_t sensor_num;
+ uint8_t enable;
+ } perform_calib;
/*
* Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR
@@ -2656,9 +2766,23 @@ struct ec_params_motion_sense {
*/
int16_t hys_degree;
} tablet_mode_threshold;
+
+ /*
+ * Used for MOTIONSENSE_CMD_ONLINE_CALIB_READ:
+ * Allow reading a single sensor's online calibration value.
+ */
+ struct __ec_todo_unpacked {
+ uint8_t sensor_num;
+ } online_calib_read;
+
};
} __ec_todo_packed;
+enum motion_sense_cmd_info_flags {
+ /* The sensor supports online calibration */
+ MOTION_SENSE_CMD_INFO_FLAG_ONLINE_CALIB = BIT(0),
+};
+
struct ec_response_motion_sense {
union {
/* Used for MOTIONSENSE_CMD_DUMP */
@@ -2709,6 +2833,33 @@ struct ec_response_motion_sense {
uint32_t fifo_max_event_count;
} info_3;
+ /* Used for MOTIONSENSE_CMD_INFO version 4 */
+ struct __ec_align4 {
+ /* Should be element of enum motionsensor_type. */
+ uint8_t type;
+
+ /* Should be element of enum motionsensor_location. */
+ uint8_t location;
+
+ /* Should be element of enum motionsensor_chip. */
+ uint8_t chip;
+
+ /* Minimum sensor sampling frequency */
+ uint32_t min_frequency;
+
+ /* Maximum sensor sampling frequency */
+ uint32_t max_frequency;
+
+ /* Max number of sensor events that could be in fifo */
+ uint32_t fifo_max_event_count;
+
+ /*
+ * Should be elements of
+ * enum motion_sense_cmd_info_flags
+ */
+ uint32_t flags;
+ } info_4;
+
/* Used for MOTIONSENSE_CMD_DATA */
struct ec_response_motion_sensor_data data;
@@ -2744,6 +2895,8 @@ struct ec_response_motion_sense {
struct ec_response_motion_sense_fifo_data fifo_read;
+ struct ec_response_online_calibration_data online_calib_read;
+
struct __ec_todo_packed {
uint16_t reserved;
uint32_t enabled;
@@ -2806,10 +2959,34 @@ struct ec_params_config_power_button {
/* Set USB port charging mode */
#define EC_CMD_USB_CHARGE_SET_MODE 0x0030
+enum usb_charge_mode {
+ /* Disable USB port. */
+ USB_CHARGE_MODE_DISABLED,
+ /* Set USB port to Standard Downstream Port, USB 2.0 mode. */
+ USB_CHARGE_MODE_SDP2,
+ /* Set USB port to Charging Downstream Port, BC 1.2. */
+ USB_CHARGE_MODE_CDP,
+ /* Set USB port to Dedicated Charging Port, BC 1.2. */
+ USB_CHARGE_MODE_DCP_SHORT,
+ /* Enable USB port (for dumb ports). */
+ USB_CHARGE_MODE_ENABLED,
+ /* Set USB port to CONFIG_USB_PORT_POWER_SMART_DEFAULT_MODE. */
+ USB_CHARGE_MODE_DEFAULT,
+
+ USB_CHARGE_MODE_COUNT
+};
+
+enum usb_suspend_charge {
+ /* Enable charging in suspend */
+ USB_ALLOW_SUSPEND_CHARGE,
+ /* Disable charging in suspend */
+ USB_DISALLOW_SUSPEND_CHARGE
+};
+
struct ec_params_usb_charge_set_mode {
uint8_t usb_port_id;
- uint8_t mode:7;
- uint8_t inhibit_charge:1;
+ uint8_t mode:7; /* enum usb_charge_mode */
+ uint8_t inhibit_charge:1; /* enum usb_suspend_charge */
} __ec_align1;
/*****************************************************************************/
@@ -3374,6 +3551,12 @@ enum ec_mkbp_event {
/* Send an incoming CEC message to the AP */
EC_MKBP_EVENT_CEC_MESSAGE = 9,
+ /* We have entered DisplayPort Alternate Mode on a Type-C port. */
+ EC_MKBP_EVENT_DP_ALT_MODE_ENTERED = 10,
+
+ /* New online calibration values are available. */
+ EC_MKBP_EVENT_ONLINE_CALIBRATION = 11,
+
/* Number of MKBP events */
EC_MKBP_EVENT_COUNT,
};
@@ -3497,6 +3680,57 @@ struct ec_response_keyboard_factory_test {
#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5
+#define EC_CMD_MKBP_WAKE_MASK 0x0069
+enum ec_mkbp_event_mask_action {
+ /* Retrieve the value of a wake mask. */
+ GET_WAKE_MASK = 0,
+
+ /* Set the value of a wake mask. */
+ SET_WAKE_MASK,
+};
+
+enum ec_mkbp_mask_type {
+ /*
+ * These are host events sent via MKBP.
+ *
+ * Some examples are:
+ * EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN)
+ * EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED)
+ *
+ * The only things that should be in this mask are:
+ * EC_HOST_EVENT_MASK(EC_HOST_EVENT_*)
+ */
+ EC_MKBP_HOST_EVENT_WAKE_MASK = 0,
+
+ /*
+ * These are MKBP events. Some examples are:
+ *
+ * EC_MKBP_EVENT_KEY_MATRIX
+ * EC_MKBP_EVENT_SWITCH
+ *
+ * The only things that should be in this mask are EC_MKBP_EVENT_*.
+ */
+ EC_MKBP_EVENT_WAKE_MASK,
+};
+
+struct ec_params_mkbp_event_wake_mask {
+ /* One of enum ec_mkbp_event_mask_action */
+ uint8_t action;
+
+ /*
+ * Which MKBP mask are you interested in acting upon? This is one of
+ * ec_mkbp_mask_type.
+ */
+ uint8_t mask_type;
+
+ /* If setting a new wake mask, this contains the mask to set. */
+ uint32_t new_wake_mask;
+};
+
+struct ec_response_mkbp_event_wake_mask {
+ uint32_t wake_mask;
+};
+
/*****************************************************************************/
/* Temperature sensor commands */
@@ -3879,16 +4113,69 @@ struct ec_response_ldo_get {
/*
* Get power info.
+ *
+ * Note: v0 of this command is deprecated
*/
#define EC_CMD_POWER_INFO 0x009D
-struct ec_response_power_info {
- uint32_t usb_dev_type;
- uint16_t voltage_ac;
- uint16_t voltage_system;
- uint16_t current_system;
- uint16_t usb_current_limit;
-} __ec_align4;
+/*
+ * v1 of EC_CMD_POWER_INFO
+ */
+enum system_power_source {
+ /*
+ * Haven't established which power source is used yet,
+ * or no presence signals are available
+ */
+ POWER_SOURCE_UNKNOWN = 0,
+ /* System is running on battery alone */
+ POWER_SOURCE_BATTERY = 1,
+ /* System is running on A/C alone */
+ POWER_SOURCE_AC = 2,
+ /* System is running on A/C and battery */
+ POWER_SOURCE_AC_BATTERY = 3,
+};
+
+struct ec_response_power_info_v1 {
+ /* enum system_power_source */
+ uint8_t system_power_source;
+ /* Battery state-of-charge, 0-100, 0 if not present */
+ uint8_t battery_soc;
+ /* AC Adapter 100% rating, Watts */
+ uint8_t ac_adapter_100pct;
+ /* AC Adapter 10ms rating, Watts */
+ uint8_t ac_adapter_10ms;
+ /* Battery 1C rating, derated */
+ uint8_t battery_1cd;
+ /* Rest of Platform average, Watts */
+ uint8_t rop_avg;
+ /* Rest of Platform peak, Watts */
+ uint8_t rop_peak;
+ /* Nominal charger efficiency, % */
+ uint8_t nominal_charger_eff;
+ /* Rest of Platform VR Average Efficiency, % */
+ uint8_t rop_avg_eff;
+ /* Rest of Platform VR Peak Efficiency, % */
+ uint8_t rop_peak_eff;
+ /* SoC VR Efficiency at Average level, % */
+ uint8_t soc_avg_eff;
+ /* SoC VR Efficiency at Peak level, % */
+ uint8_t soc_peak_eff;
+ /* Intel-specific items */
+ struct {
+ /* Battery's level of DBPT support: 0, 2 */
+ uint8_t batt_dbpt_support_level;
+ /*
+ * Maximum peak power from battery (10ms), Watts
+ * If DBPT is not supported, this is 0
+ */
+ uint8_t batt_dbpt_max_peak_power;
+ /*
+ * Sustained peak power from battery, Watts
+ * If DBPT is not supported, this is 0
+ */
+ uint8_t batt_dbpt_sus_peak_power;
+ } intel;
+} __ec_align1;
/*****************************************************************************/
/* I2C passthru command */
@@ -3908,7 +4195,7 @@ struct ec_response_power_info {
#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT)
struct ec_params_i2c_passthru_msg {
- uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */
+ uint16_t addr_flags; /* I2C slave address and flags */
uint16_t len; /* Number of bytes to read or write */
} __ec_align2;
@@ -4360,6 +4647,9 @@ struct ec_response_sb_fw_update {
* Entering Verified Boot Mode Command
* Default mode is VBOOT_MODE_NORMAL if EC did not receive this command.
* Valid Modes are: normal, developer, and recovery.
+ *
+ * EC no longer needs to know what mode vboot has entered,
+ * so this command is deprecated. (See chromium:1014379.)
*/
#define EC_CMD_ENTERING_MODE 0x00B6
@@ -4379,8 +4669,9 @@ struct ec_params_entering_mode {
#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7
enum ec_i2c_passthru_protect_subcmd {
- EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0,
- EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1,
+ EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0,
+ EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 1,
+ EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE_TCPCS = 2,
};
struct ec_params_i2c_passthru_protect {
@@ -4893,7 +5184,7 @@ struct ec_params_usb_pd_control {
#define PD_CTRL_RESP_ROLE_DR_POWER BIT(3) /* Partner is dualrole power */
#define PD_CTRL_RESP_ROLE_DR_DATA BIT(4) /* Partner is dualrole data */
#define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */
-#define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */
+#define PD_CTRL_RESP_ROLE_UNCONSTRAINED BIT(6) /* Partner unconstrained power */
struct ec_response_usb_pd_control {
uint8_t enabled;
@@ -4909,23 +5200,45 @@ struct ec_response_usb_pd_control_v1 {
char state[32];
} __ec_align1;
-/* Values representing usbc PD CC state */
-#define USBC_PD_CC_NONE 0 /* No accessory connected */
-#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */
-#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */
-#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */
-#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */
-#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */
+/* Possible port partner connections based on CC line states */
+enum pd_cc_states {
+ PD_CC_NONE = 0, /* No port partner attached */
+
+ /* From DFP perspective */
+ PD_CC_UFP_NONE = 1, /* No UFP accessory connected */
+ PD_CC_UFP_AUDIO_ACC = 2, /* UFP Audio accessory connected */
+ PD_CC_UFP_DEBUG_ACC = 3, /* UFP Debug accessory connected */
+ PD_CC_UFP_ATTACHED = 4, /* Plain UFP attached */
+ /* From UFP perspective */
+ PD_CC_DFP_ATTACHED = 5, /* Plain DFP attached */
+ PD_CC_DFP_DEBUG_ACC = 6, /* DFP debug accessory connected */
+};
+
+/* Active/Passive Cable */
+#define USB_PD_CTRL_ACTIVE_CABLE BIT(0)
+/* Optical/Non-optical cable */
+#define USB_PD_CTRL_OPTICAL_CABLE BIT(1)
+/* 3rd Gen TBT device (or AMA)/2nd gen tbt Adapter */
+#define USB_PD_CTRL_TBT_LEGACY_ADAPTER BIT(2)
+/* Active Link Uni-Direction */
+#define USB_PD_CTRL_ACTIVE_LINK_UNIDIR BIT(3)
+
+/*
+ * Underdevelopement :
+ * Please remove this tag if using _v2 outside platform/ec
+ */
struct ec_response_usb_pd_control_v2 {
uint8_t enabled;
uint8_t role;
uint8_t polarity;
char state[32];
- uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */
- uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
- /* CL:1500994 Current cable type */
- uint8_t reserved_cable_type;
+ uint8_t cc_state; /* enum pd_cc_states representing cc state */
+ uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */
+ uint8_t reserved; /* Reserved for future use */
+ uint8_t control_flags; /* USB_PD_CTRL_*flags */
+ uint8_t cable_speed; /* TBT_SS_* cable speed */
+ uint8_t cable_gen; /* TBT_GEN3_* cable rounded support */
} __ec_align1;
#define EC_CMD_USB_PD_PORTS 0x0102
@@ -5021,7 +5334,7 @@ struct ec_params_usb_pd_rw_hash_entry {
* TODO(rspangler) but it's not aligned!
* Should have been reserved[2].
*/
- uint32_t current_image; /* One of ec_current_image */
+ uint32_t current_image; /* One of ec_image */
} __ec_align1;
/* Read USB-PD Accessory info */
@@ -5046,7 +5359,7 @@ struct ec_params_usb_pd_discovery_entry {
enum usb_pd_override_ports {
OVERRIDE_DONT_CHARGE = -2,
OVERRIDE_OFF = -1,
- /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */
+ /* [0, CONFIG_USB_PD_PORT_MAX_COUNT): Port# */
};
struct ec_params_charge_port_override {
@@ -5207,11 +5520,18 @@ struct ec_params_usb_pd_mux_info {
} __ec_align1;
/* Flags representing mux state */
-#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */
-#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */
-#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
-#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */
-#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */
+#define USB_PD_MUX_NONE 0 /* Open switch */
+#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */
+#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */
+#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */
+#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */
+#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */
+#define USB_PD_MUX_SAFE_MODE BIT(5) /* DP is in safe mode */
+#define USB_PD_MUX_TBT_COMPAT_ENABLED BIT(6) /* TBT compat enabled */
+#define USB_PD_MUX_USB4_ENABLED BIT(7) /* USB4 enabled */
+
+/* USB-C Dock connected */
+#define USB_PD_MUX_DOCK (USB_PD_MUX_USB_ENABLED | USB_PD_MUX_DP_ENABLED)
struct ec_response_usb_pd_mux_info {
uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */
@@ -5221,7 +5541,12 @@ struct ec_response_usb_pd_mux_info {
struct ec_params_pd_chip_info {
uint8_t port; /* USB-C port number */
- uint8_t renew; /* Force renewal */
+ /*
+ * Fetch the live chip info or hard-coded + cached chip info
+ * 0: hardcoded value for VID/PID, cached value for FW version
+ * 1: live chip value for VID/PID/FW Version
+ */
+ uint8_t live;
} __ec_align1;
struct ec_response_pd_chip_info {
@@ -5293,6 +5618,7 @@ enum cbi_data_tag {
CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */
CBI_TAG_OEM_NAME = 4, /* variable length ascii, nul terminated. */
CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */
+ CBI_TAG_FW_CONFIG = 6, /* uint32_t bit field */
CBI_TAG_COUNT,
};
@@ -5332,6 +5658,32 @@ struct ec_params_set_cbi {
*/
#define EC_CMD_GET_UPTIME_INFO 0x0121
+/* Reset causes */
+#define EC_RESET_FLAG_OTHER BIT(0) /* Other known reason */
+#define EC_RESET_FLAG_RESET_PIN BIT(1) /* Reset pin asserted */
+#define EC_RESET_FLAG_BROWNOUT BIT(2) /* Brownout */
+#define EC_RESET_FLAG_POWER_ON BIT(3) /* Power-on reset */
+#define EC_RESET_FLAG_WATCHDOG BIT(4) /* Watchdog timer reset */
+#define EC_RESET_FLAG_SOFT BIT(5) /* Soft reset trigger by core */
+#define EC_RESET_FLAG_HIBERNATE BIT(6) /* Wake from hibernate */
+#define EC_RESET_FLAG_RTC_ALARM BIT(7) /* RTC alarm wake */
+#define EC_RESET_FLAG_WAKE_PIN BIT(8) /* Wake pin triggered wake */
+#define EC_RESET_FLAG_LOW_BATTERY BIT(9) /* Low battery triggered wake */
+#define EC_RESET_FLAG_SYSJUMP BIT(10) /* Jumped directly to this image */
+#define EC_RESET_FLAG_HARD BIT(11) /* Hard reset from software */
+#define EC_RESET_FLAG_AP_OFF BIT(12) /* Do not power on AP */
+#define EC_RESET_FLAG_PRESERVED BIT(13) /* Some reset flags preserved from
+ * previous boot
+ */
+#define EC_RESET_FLAG_USB_RESUME BIT(14) /* USB resume triggered wake */
+#define EC_RESET_FLAG_RDD BIT(15) /* USB Type-C debug cable */
+#define EC_RESET_FLAG_RBOX BIT(16) /* Fixed Reset Functionality */
+#define EC_RESET_FLAG_SECURITY BIT(17) /* Security threat */
+#define EC_RESET_FLAG_AP_WATCHDOG BIT(18) /* AP experienced a watchdog reset */
+#define EC_RESET_FLAG_STAY_IN_RO BIT(19) /* Do not select RW in EFS. This
+ * enables PD in RO for Chromebox.
+ */
+
struct ec_response_uptime_info {
/*
* Number of milliseconds since the last EC boot. Sysjump resets
@@ -5352,8 +5704,8 @@ struct ec_response_uptime_info {
uint32_t ap_resets_since_ec_boot;
/*
- * The set of flags which describe the EC's most recent reset. See
- * include/system.h RESET_FLAG_* for details.
+ * The set of flags which describe the EC's most recent reset.
+ * See EC_RESET_FLAG_* for details.
*/
uint32_t ec_reset_flags;
@@ -5430,6 +5782,133 @@ struct ec_response_rollback_info {
/* Issue AP reset */
#define EC_CMD_AP_RESET 0x0125
+/*****************************************************************************/
+/* Locate peripheral chips
+ *
+ * Return values:
+ * EC_RES_UNAVAILABLE: The chip type is supported but not found on system.
+ * EC_RES_INVALID_PARAM: The chip type was unrecognized.
+ * EC_RES_OVERFLOW: The index number exceeded the number of chip instances.
+ */
+#define EC_CMD_LOCATE_CHIP 0x0126
+
+enum ec_chip_type {
+ EC_CHIP_TYPE_CBI_EEPROM = 0,
+ EC_CHIP_TYPE_TCPC = 1,
+ EC_CHIP_TYPE_COUNT,
+ EC_CHIP_TYPE_MAX = 0xFF,
+};
+
+enum ec_bus_type {
+ EC_BUS_TYPE_I2C = 0,
+ EC_BUS_TYPE_EMBEDDED = 1,
+ EC_BUS_TYPE_COUNT,
+ EC_BUS_TYPE_MAX = 0xFF,
+};
+
+struct ec_i2c_info {
+ uint16_t port; /* Physical port for device */
+ uint16_t addr_flags; /* 7-bit (or 10-bit) address */
+};
+
+struct ec_params_locate_chip {
+ uint8_t type; /* enum ec_chip_type */
+ uint8_t index; /* Specifies one instance of chip type */
+ /* Used for type specific parameters in future */
+ union {
+ uint16_t reserved;
+ };
+} __ec_align2;
+
+
+struct ec_response_locate_chip {
+ uint8_t bus_type; /* enum ec_bus_type */
+ uint8_t reserved; /* Aligning the following union to 2 bytes */
+ union {
+ struct ec_i2c_info i2c_info;
+ };
+} __ec_align2;
+
+/*
+ * Reboot AP on G3
+ *
+ * This command is used for validation purpose, where the AP needs to be
+ * returned back to S0 state from G3 state without using the servo to trigger
+ * wake events.For this,there is no request or response struct.
+ *
+ * Order of command usage:
+ * ectool reboot_ap_on_g3 && shutdown -h now
+ */
+#define EC_CMD_REBOOT_AP_ON_G3 0x0127
+
+/*****************************************************************************/
+/* Get PD port capabilities
+ *
+ * Returns the following static *capabilities* of the given port:
+ * 1) Power role: source, sink, or dual. It is not anticipated that
+ * future CrOS devices would ever be only a source, so the options are
+ * sink or dual.
+ * 2) Try-power role: source, sink, or none (practically speaking, I don't
+ * believe any CrOS device would support Try.SNK, so this would be source
+ * or none).
+ * 3) Data role: dfp, ufp, or dual. This will probably only be DFP or dual
+ * for CrOS devices.
+ */
+#define EC_CMD_GET_PD_PORT_CAPS 0x0128
+
+enum ec_pd_power_role_caps {
+ EC_PD_POWER_ROLE_SOURCE = 0,
+ EC_PD_POWER_ROLE_SINK = 1,
+ EC_PD_POWER_ROLE_DUAL = 2,
+};
+
+enum ec_pd_try_power_role_caps {
+ EC_PD_TRY_POWER_ROLE_NONE = 0,
+ EC_PD_TRY_POWER_ROLE_SINK = 1,
+ EC_PD_TRY_POWER_ROLE_SOURCE = 2,
+};
+
+enum ec_pd_data_role_caps {
+ EC_PD_DATA_ROLE_DFP = 0,
+ EC_PD_DATA_ROLE_UFP = 1,
+ EC_PD_DATA_ROLE_DUAL = 2,
+};
+
+/* From: power_manager/power_supply_properties.proto */
+enum ec_pd_port_location {
+ /* The location of the port is unknown, or there's only one port. */
+ EC_PD_PORT_LOCATION_UNKNOWN = 0,
+
+ /*
+ * Various positions on the device. The first word describes the side of
+ * the device where the port is located while the second clarifies the
+ * position. For example, LEFT_BACK means the farthest-back port on the
+ * left side, while BACK_LEFT means the leftmost port on the back of the
+ * device.
+ */
+ EC_PD_PORT_LOCATION_LEFT = 1,
+ EC_PD_PORT_LOCATION_RIGHT = 2,
+ EC_PD_PORT_LOCATION_BACK = 3,
+ EC_PD_PORT_LOCATION_FRONT = 4,
+ EC_PD_PORT_LOCATION_LEFT_FRONT = 5,
+ EC_PD_PORT_LOCATION_LEFT_BACK = 6,
+ EC_PD_PORT_LOCATION_RIGHT_FRONT = 7,
+ EC_PD_PORT_LOCATION_RIGHT_BACK = 8,
+ EC_PD_PORT_LOCATION_BACK_LEFT = 9,
+ EC_PD_PORT_LOCATION_BACK_RIGHT = 10,
+};
+
+struct ec_params_get_pd_port_caps {
+ uint8_t port; /* Which port to interrogate */
+} __ec_align1;
+
+struct ec_response_get_pd_port_caps {
+ uint8_t pd_power_role_cap; /* enum ec_pd_power_role_caps */
+ uint8_t pd_try_power_role_cap; /* enum ec_pd_try_power_role_caps */
+ uint8_t pd_data_role_cap; /* enum ec_pd_data_role_caps */
+ uint8_t pd_port_location; /* enum ec_pd_port_location */
+} __ec_align1;
+
/*****************************************************************************/
/* The command range 0x200-0x2FF is reserved for Rotor. */
@@ -5585,15 +6064,18 @@ struct ec_response_fp_info {
#define FP_FRAME_OFFSET_MASK 0x0FFFFFFF
/* Version of the format of the encrypted templates. */
-#define FP_TEMPLATE_FORMAT_VERSION 3
+#define FP_TEMPLATE_FORMAT_VERSION 4
/* Constants for encryption parameters */
#define FP_CONTEXT_NONCE_BYTES 12
#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
#define FP_CONTEXT_TAG_BYTES 16
-#define FP_CONTEXT_SALT_BYTES 16
+#define FP_CONTEXT_ENCRYPTION_SALT_BYTES 16
#define FP_CONTEXT_TPM_BYTES 32
+/* Constants for positive match parameters. */
+#define FP_POSITIVE_MATCH_SALT_BYTES 16
+
struct ec_fp_template_encryption_metadata {
/*
* Version of the structure format (N=3).
@@ -5606,7 +6088,7 @@ struct ec_fp_template_encryption_metadata {
* a different one is used for every message.
*/
uint8_t nonce[FP_CONTEXT_NONCE_BYTES];
- uint8_t salt[FP_CONTEXT_SALT_BYTES];
+ uint8_t encryption_salt[FP_CONTEXT_ENCRYPTION_SALT_BYTES];
uint8_t tag[FP_CONTEXT_TAG_BYTES];
};
@@ -5639,6 +6121,18 @@ struct ec_params_fp_context {
uint32_t userid[FP_CONTEXT_USERID_WORDS];
} __ec_align4;
+enum fp_context_action {
+ FP_CONTEXT_ASYNC = 0,
+ FP_CONTEXT_GET_RESULT = 1,
+};
+
+/* Version 1 of the command is "asynchronous". */
+struct ec_params_fp_context_v1 {
+ uint8_t action; /**< enum fp_context_action */
+ uint8_t reserved[3]; /**< padding for alignment */
+ uint32_t userid[FP_CONTEXT_USERID_WORDS];
+} __ec_align4;
+
#define EC_CMD_FP_STATS 0x0407
#define FPSTATS_CAPTURE_INV BIT(0)
@@ -5680,6 +6174,17 @@ struct ec_response_fp_encryption_status {
uint32_t status;
} __ec_align4;
+#define EC_CMD_FP_READ_MATCH_SECRET 0x040A
+struct ec_params_fp_read_match_secret {
+ uint16_t fgr;
+} __ec_align4;
+
+/* The positive match secret has the length of the SHA256 digest. */
+#define FP_POSITIVE_MATCH_SECRET_BYTES 32
+struct ec_response_fp_read_match_secret {
+ uint8_t positive_match_secret[FP_POSITIVE_MATCH_SECRET_BYTES];
+} __ec_align4;
+
/*****************************************************************************/
/* Touchpad MCU commands: range 0x0500-0x05FF */
--
2.25.1.481.gfbce0eb801-goog
Powered by blists - more mailing lists