| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1584003692-25523-8-git-send-email-peng.fan@nxp.com>
Date: Thu, 12 Mar 2020 17:01:29 +0800
From: peng.fan@....com
To: shawnguo@...nel.org, s.hauer@...gutronix.de,
leonard.crestez@....com, sboyd@...nel.org, abel.vesa@....com
Cc: kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Anson.Huang@....com, daniel.baluta@....com, aford173@...il.com,
ping.bai@....com, jun.li@....com, l.stach@...gutronix.de,
andrew.smirnov@...il.com, agx@...xcpu.org, angus@...ea.ca,
heiko@...ech.de, fugang.duan@....com, linux-clk@...r.kernel.org,
Peng Fan <peng.fan@....com>
Subject: [PATCH 07/10] clk: imx: add mux ops for i.MX8M composite clk
From: Peng Fan <peng.fan@....com>
The CORE/BUS root slice has following design, simplied graph:
The difference is core not have pre_div block.
A composite core/bus clk has 8 inputs for mux to select, saying clk[0-7].
SEL_A GA
+--+ +-+
| +->+ +------+
CLK[0-7]--->+ | +-+ |
| | | +----v---+ +----+
| +--+ |pre_diva+----> | +---------+
| +--------+ |mux +--+post_div |
| +--+ |pre_divb+--->+ | +---------+
| | | +----^---+ +----+
+--->+ | +-+ |
| +->+ +------+
+--+ +-+
SEL_B GB
There will be system hang, when doing the following steps:
1. switch mux from clk0 to clk1
2. gate off clk0
3. switch from clk1 to clk2, or gate off clk1
Step 3 triggers system hang.
If we skip step2, keep clk0 on, step 3 will not trigger system hang.
However we have CLK_OPS_PARENT_ENABLE flag, which will unprepare disable
the clk0 which will not be used.
To address this issue, we could use following simplied software flow:
After the first target register set
wait the target register set finished
set the target register set again
wait the target register set finished
The upper flow will make sure SEL_A and SEL_B both set the new mux,
but with only one path gate on.
And there will be no system hang anymore with step3.
Signed-off-by: Peng Fan <peng.fan@....com>
---
drivers/clk/imx/clk-composite-8m.c | 69 +++++++++++++++++++++++++++++++++++++-
1 file changed, 68 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 99773519b5a5..fe05b3c4d4fc 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -6,6 +6,7 @@
#include <linux/clk-provider.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/slab.h>
#include "clk.h"
@@ -24,6 +25,12 @@
#define PCG_CGC_SHIFT 28
+#define PRE_REG_OFF 0x30
+#define PRE_MUXA_SHIFT 24
+#define PRE_MUXA_MASK 0x7
+#define PRE_MUXB_SHIFT 8
+#define PRE_MUXB_MASK 0x7
+
static unsigned long imx8m_clk_composite_divider_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -124,6 +131,63 @@ static const struct clk_ops imx8m_clk_composite_divider_ops = {
.set_rate = imx8m_clk_composite_divider_set_rate,
};
+static u8 imx8m_clk_composite_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val;
+
+ val = readl(mux->reg) >> mux->shift;
+ val &= mux->mask;
+
+ return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
+}
+
+static int imx8m_clk_composite_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+ u32 val = clk_mux_index_to_val(mux->table, mux->flags, index);
+ unsigned long flags = 0;
+ u32 reg;
+
+ if (mux->lock)
+ spin_lock_irqsave(mux->lock, flags);
+
+ reg = readl(mux->reg);
+ reg &= ~(mux->mask << mux->shift);
+ val = val << mux->shift;
+ reg |= val;
+ writel(reg, mux->reg);
+
+ val = 0xFFFFFFFF;
+ readl_poll_timeout(mux->reg, val, val == reg, 0, 0);
+
+ writel(reg, mux->reg);
+
+ val = 0xFFFFFFFF;
+ readl_poll_timeout(mux->reg, val, val == reg, 0, 0);
+
+ if (mux->lock)
+ spin_unlock_irqrestore(mux->lock, flags);
+
+ return 0;
+}
+
+static int
+imx8m_clk_composite_mux_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_mux *mux = to_clk_mux(hw);
+
+ return clk_mux_determine_rate_flags(hw, req, mux->flags);
+}
+
+
+const struct clk_ops imx8m_clk_composite_mux_ops = {
+ .get_parent = imx8m_clk_composite_mux_get_parent,
+ .set_parent = imx8m_clk_composite_mux_set_parent,
+ .determine_rate = imx8m_clk_composite_mux_determine_rate,
+};
+
struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
const char * const *parent_names,
int num_parents, void __iomem *reg,
@@ -136,6 +200,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
struct clk_gate *gate = NULL;
struct clk_mux *mux = NULL;
const struct clk_ops *divider_ops;
+ const struct clk_ops *mux_ops;
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -157,10 +222,12 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
div->shift = PCG_DIV_SHIFT;
div->width = PCG_CORE_DIV_WIDTH;
divider_ops = &clk_divider_ops;
+ mux_ops = &imx8m_clk_composite_mux_ops;
} else {
div->shift = PCG_PREDIV_SHIFT;
div->width = PCG_PREDIV_WIDTH;
divider_ops = &imx8m_clk_composite_divider_ops;
+ mux_ops = &clk_mux_ops;
}
div->lock = &imx_ccm_lock;
@@ -176,7 +243,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
gate->lock = &imx_ccm_lock;
hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
- mux_hw, &clk_mux_ops, div_hw,
+ mux_hw, mux_ops, div_hw,
divider_ops, gate_hw, &clk_gate_ops, flags);
if (IS_ERR(hw))
goto fail;
--
2.16.4
Powered by blists - more mailing lists