linux-kernel - Re: [PATCH v2 00/11] Raspbery Pi 4 vmmc regulator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 12 Mar 2020 14:08:31 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     Adrian Hunter <adrian.hunter@...el.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        phil@...pberrypi.com,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        Stefan Wahren <stefan.wahren@...e.com>,
        BCM Kernel Feedback <bcm-kernel-feedback-list@...adcom.com>,
        linux-rpi-kernel@...ts.infradead.org,
        DTML <devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 00/11] Raspbery Pi 4 vmmc regulator support

On Fri, 6 Mar 2020 at 18:44, Nicolas Saenz Julienne
<nsaenzjulienne@...e.de> wrote:
>
> The series first cleans up a common pattern, which is ultimately needed
> to integrate the regulator with bcm2711's sdhci-iproc. It then
> introduces the relevant device-tree changes.
>
> ---
>
> Changes since v1:
>  - Use helper function istead of quirk
>  - Add GPIO label
>
> Nicolas Saenz Julienne (11):
>   mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
>   mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: pxav3: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: xenon: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
>   mmc: sdhci: Unexport sdhci_set_power_noreg()
>   mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
>   ARM: dts: bcm2711: Update expgpio's GPIO labels
>   ARM: dts: bcm2711: Add vmmc regulator in emmc2
>
>  arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 13 ++++++++++++-
>  drivers/mmc/host/sdhci-iproc.c        | 17 ++++++++++++++++-
>  drivers/mmc/host/sdhci-milbeaut.c     | 13 +------------
>  drivers/mmc/host/sdhci-of-arasan.c    | 15 ++-------------
>  drivers/mmc/host/sdhci-of-at91.c      | 18 +-----------------
>  drivers/mmc/host/sdhci-pxav3.c        | 20 +-------------------
>  drivers/mmc/host/sdhci-xenon.c        | 20 +-------------------
>  drivers/mmc/host/sdhci.c              | 24 +++++++++++++++++++++---
>  drivers/mmc/host/sdhci.h              |  5 +++--
>  drivers/mmc/host/sdhci_am654.c        | 17 +++--------------
>  10 files changed, 61 insertions(+), 101 deletions(-)
>
> --
> 2.25.1
>

Patch 1-4, 6, 9 applied for next, thanks!

Kind regards
Uffe