[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <applied-20200312133131.26430-5-narmstrong@baylibre.com>
Date: Thu, 12 Mar 2020 17:39:17 +0000
From: Mark Brown <broonie@...nel.org>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: broonie@...nel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-spi@...r.kernel.org, Mark Brown <broonie@...nel.org>,
Sunny Luo <sunny.luo@...ogic.com>,
Yixun Lan <yixun.lan@...ogic.com>
Subject: Applied "spi: meson-spicc: support max 80MHz clock" to the spi tree
The patch
spi: meson-spicc: support max 80MHz clock
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 3196816ff64bb3a21fbda89e7355b6b87c3f50a0 Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@...libre.com>
Date: Thu, 12 Mar 2020 14:31:26 +0100
Subject: [PATCH] spi: meson-spicc: support max 80MHz clock
The SPICC controller in Meson-AXG is capable of running at 80M clock.
The ASIC IP is improved and the clock is actually running higher than
previous old SoCs.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
Signed-off-by: Sunny Luo <sunny.luo@...ogic.com>
Link: https://lore.kernel.org/r/20200312133131.26430-5-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@...nel.org>
---
drivers/spi/spi-meson-spicc.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index bd434d9055d9..710b4e780daa 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -35,7 +35,6 @@
* to have a CS go down over the full transfer
*/
-#define SPICC_MAX_FREQ 30000000
#define SPICC_MAX_BURST 128
/* Register Map */
@@ -132,6 +131,7 @@
#define SPICC_FIFO_HALF 10
struct meson_spicc_data {
+ unsigned int max_speed_hz;
bool has_oen;
bool has_enhance_clk_div;
};
@@ -693,11 +693,9 @@ static int meson_spicc_probe(struct platform_device *pdev)
master->transfer_one = meson_spicc_transfer_one;
master->use_gpio_descriptors = true;
- /* Setup max rate according to the Meson GX datasheet */
- if ((rate >> 2) > SPICC_MAX_FREQ)
- master->max_speed_hz = SPICC_MAX_FREQ;
- else
- master->max_speed_hz = rate >> 2;
+ /* Setup max rate according to the Meson datasheet */
+ master->max_speed_hz = min_t(unsigned int, rate >> 1,
+ spicc->data->max_speed_hz);
meson_spicc_oen_enable(spicc);
@@ -737,9 +735,11 @@ static int meson_spicc_remove(struct platform_device *pdev)
}
static const struct meson_spicc_data meson_spicc_gx_data = {
+ .max_speed_hz = 30000000,
};
static const struct meson_spicc_data meson_spicc_axg_data = {
+ .max_speed_hz = 80000000,
.has_oen = true,
.has_enhance_clk_div = true,
};
--
2.20.1
Powered by blists - more mailing lists