[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200313000112.19419-1-npcomplete13@gmail.com>
Date: Thu, 12 Mar 2020 20:01:12 -0400
From: Vivek Unune <npcomplete13@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com, heiko@...ech.de,
ezequiel@...labora.com, jbx6244@...il.com, akash@...nedev.com
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Vivek Unune <npcomplete13@...il.com>
Subject: [PATCH] arm64: dts: rockchip: Add Hugsun X99 IR receiver and power led
- Add Hugsun X99 IR receiver and power led
- Remove pwm0 node as it interferes with pwer LED gpio
Also, it's not used in factory firmware
Tested with Libreelec kernel v5.6
Signed-off-by: Vivek Unune <npcomplete13@...il.com>
---
.../boot/dts/rockchip/rk3399-hugsun-x99.dts | 37 +++++++++++++++++--
1 file changed, 33 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index d69a613fb65a..df425e164a2e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -29,6 +29,26 @@
regulator-max-microvolt = <5000000>;
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_rx>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_led_gpio>;
+
+ power-led {
+ label = "blue:power";
+ gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+ };
+
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
@@ -483,6 +503,18 @@
};
};
+ ir {
+ ir_rx: ir-rx {
+ rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ power_led_gpio: power-led-gpio {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
@@ -539,10 +572,6 @@
};
};
-&pwm0 {
- status = "okay";
-};
-
&pwm2 {
status = "okay";
pinctrl-0 = <&pwm2_pin_pull_down>;
--
2.20.1
Powered by blists - more mailing lists