| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1584095350-841-2-git-send-email-akashast@codeaurora.org>
Date: Fri, 13 Mar 2020 15:59:08 +0530
From: Akash Asthana <akashast@...eaurora.org>
To: robh+dt@...nel.org, agross@...nel.org, mark.rutland@....com
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, mgautam@...eaurora.org,
rojay@...eaurora.org, c_skakit@...eaurora.org, mka@...omium.org,
Akash Asthana <akashast@...eaurora.org>
Subject: [PATCH V5 1/3] dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
Convert QUP geni-se bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@...eaurora.org>
Reviewed-by: Rob Herring <robh@...nel.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
---
Changes in V2:
- As per Stephen's comment corrected defintion of interrupts for UART node.
Any valid UART node must contain atleast 1 interrupts.
Changes in V3:
- As per Rob's comment, added number of reg entries for reg property.
- As per Rob's comment, corrected unit address to hex.
- As per Rob's comment, created a pattern which matches everything common
to geni based I2C, SPI and UART controller and then one pattern for each.
- As per Rob's comment, restored original example.
Changes in V4:
- Resolve below compilation error reported from bot.
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/
qcom,geni-se.yaml: properties:clocks:minItems: False schema does not allow 2
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/soc/qcom/
qcom,geni-se.yaml: properties:clocks:maxItems: False schema does not allow 2
Documentation/devicetree/bindings/Makefile:12: recipe for target
'Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/soc/qcom/
qcom,geni-se.example.dts] Error 1
Makefile:1263: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
.../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 94 ---------
.../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 209 +++++++++++++++++++++
2 files changed, 209 insertions(+), 94 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
Changes in V5
- No change
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
deleted file mode 100644
index dab7ca9..0000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
-
-Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
-is a programmable module for supporting a wide range of serial interfaces
-like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
-Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
-Wrapper controller is modeled as a node with zero or more child nodes each
-representing a serial engine.
-
-Required properties:
-- compatible: Must be "qcom,geni-se-qup".
-- reg: Must contain QUP register address and length.
-- clock-names: Must contain "m-ahb" and "s-ahb".
-- clocks: AHB clocks needed by the device.
-
-Required properties if child node exists:
-- #address-cells: Must be <1> for Serial Engine Address
-- #size-cells: Must be <1> for Serial Engine Address Size
-- ranges: Must be present
-
-Properties for children:
-
-A GENI based QUP wrapper controller node can contain 0 or more child nodes
-representing serial devices. These serial devices can be a QCOM UART, I2C
-controller, SPI controller, or some combination of aforementioned devices.
-Please refer below the child node definitions for the supported serial
-interface protocols.
-
-Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
-
-Required properties:
-- compatible: Must be "qcom,geni-i2c".
-- reg: Must contain QUP register address and length.
-- interrupts: Must contain I2C interrupt.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-- #address-cells: Must be <1> for I2C device address.
-- #size-cells: Must be <0> as I2C addresses have no size component.
-
-Optional property:
-- clock-frequency: Desired I2C bus clock frequency in Hz.
- When missing default to 100000Hz.
-
-Child nodes should conform to I2C bus binding as described in i2c.txt.
-
-Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
-
-Required properties:
-- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart".
-- reg: Must contain UART register location and length.
-- interrupts: Must contain UART core interrupts.
-- clock-names: Must contain "se".
-- clocks: Serial engine core clock needed by the device.
-
-Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
-node binding is described in
-Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
-
-Example:
- geniqup@...000 {
- compatible = "qcom,geni-se-qup";
- reg = <0x8c0000 0x6000>;
- clock-names = "m-ahb", "s-ahb";
- clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
- <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- i2c0: i2c@...000 {
- compatible = "qcom,geni-i2c";
- reg = <0xa94000 0x4000>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_i2c_5_active>;
- pinctrl-1 = <&qup_1_i2c_5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- uart0: serial@...000 {
- compatible = "qcom,geni-debug-uart";
- reg = <0xa88000 0x7000>;
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "se";
- clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&qup_1_uart_3_active>;
- pinctrl-1 = <&qup_1_uart_3_sleep>;
- };
-
- }
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
new file mode 100644
index 0000000..23282ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: GENI Serial Engine QUP Wrapper Controller
+
+maintainers:
+ - Mukesh Savaliya <msavaliy@...eaurora.org>
+ - Akash Asthana <akashast@...eaurora.org>
+
+description: |
+ Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
+ is a programmable module for supporting a wide range of serial interfaces
+ like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
+ Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
+ Wrapper controller is modeled as a node with zero or more child nodes each
+ representing a serial engine.
+
+properties:
+ compatible:
+ enum:
+ - qcom,geni-se-qup
+
+ reg:
+ description: QUP wrapper common register address and length.
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: m-ahb
+ - const: s-ahb
+
+ clocks:
+ items:
+ - description: Master AHB Clock
+ - description: Slave AHB Clock
+
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges: true
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+patternProperties:
+ "^.*@[0-9a-f]+$":
+ type: object
+ description: Common properties for GENI Serial Engine based I2C, SPI and
+ UART controller.
+
+ properties:
+ reg:
+ description: GENI Serial Engine register address and length.
+ maxItems: 1
+
+ clock-names:
+ const: se
+
+ clocks:
+ description: Serial engine core clock needed by the device.
+ maxItems: 1
+
+ required:
+ - reg
+ - clock-names
+ - clocks
+
+ "spi@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based SPI controller. SPI in master mode
+ supports up to 50MHz, up to four chip selects, programmable
+ data path from 4 bits to 32 bits and numerous protocol
+ variants.
+ allOf:
+ - $ref: /spi/spi-controller.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-spi
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ required:
+ - compatible
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+ "i2c@[0-9a-f]+$":
+ type: object
+ description: GENI serial engine based I2C controller.
+ allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-i2c
+
+ interrupts:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clock-frequency:
+ description: Desired I2C bus clock frequency in Hz.
+ default: 100000
+
+ required:
+ - compatible
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+
+ "serial@[0-9a-f]+$":
+ type: object
+ description: GENI Serial Engine based UART Controller.
+ allOf:
+ - $ref: /schemas/serial.yaml#
+
+ properties:
+ compatible:
+ enum:
+ - qcom,geni-uart
+ - qcom,geni-debug-uart
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: UART core irq
+ - description: Wakeup irq (RX GPIO)
+
+ required:
+ - compatible
+ - interrupts
+
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc: soc@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ geniqup@...000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x008c0000 0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ i2c0: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0xa94000 0 0x4000>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_i2c_5_active>;
+ pinctrl-1 = <&qup_1_i2c_5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0xa88000 0 0x7000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_uart_3_active>;
+ pinctrl-1 = <&qup_1_uart_3_sleep>;
+ };
+ };
+ };
+
+...
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
Powered by blists - more mailing lists