[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200313110350.10864-2-robert.foss@linaro.org>
Date: Fri, 13 Mar 2020 12:03:48 +0100
From: Robert Foss <robert.foss@...aro.org>
To: Dongchun Zhu <dongchun.zhu@...iatek.com>,
Fabio Estevam <festevam@...il.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Sakari Ailus <sakari.ailus@....fi>,
Tomasz Figa <tfiga@...omium.org>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Robert Foss <robert.foss@...aro.org>
Subject: [v2 1/3] media: dt-bindings: ov8856: Document YAML bindings
From: Dongchun Zhu <dongchun.zhu@...iatek.com>
This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@...iatek.com>
Signed-off-by: Robert Foss <robert.foss@...aro.org>
---
- Changes since v4:
* Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
* Add clock-lanes property to example
* robher: Fix syntax error in devicetree example
- Changes since v3:
* robher: Fix syntax error
* robher: Removed maxItems
* Fixes yaml 'make dt-binding-check' errors
- Changes since v2:
Fixes comments from from Andy, Tomasz, Sakari, Rob.
* Convert text documentation to YAML schema.
- Changes since v1:
Fixes comments from Sakari, Tomasz
* Add clock-frequency and link-frequencies in DT
.../devicetree/bindings/media/i2c/ov8856.yaml | 133 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 134 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 000000000000..f5cb9add9277
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Ben Kao <ben.kao@...el.com>
+ - Dongchun Zhu <dongchun.zhu@...iatek.com>
+
+description: |-
+ The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+ image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 4-lane).
+
+properties:
+ compatible:
+ const: ovti,ov8856
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDOWN which is physically
+ active low.
+
+ port:
+ type: object
+ additionalProperties: false
+ description:
+ A node containing input and output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ maxItems: 1
+
+ remote-endpoint: true
+
+ required:
+ - clock-lanes
+ - data-lanes
+ - remote-endpoint
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+
+ ov8856: camera-sensor@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+ reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam>;
+
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&mt6358_vcama2_reg>;
+ dvdd-supply = <&mt6358_vcamd_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000 180000000>;
+ };
+ };
+ };
+
+...
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index a6fbdf354d34..0f99e863978a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12355,6 +12355,7 @@ L: linux-media@...r.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov8856.c
+F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
OMNIVISION OV9650 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@...ux.intel.com>
--
2.20.1
Powered by blists - more mailing lists