[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200313140731.GD25745@shell.armlinux.org.uk>
Date: Fri, 13 Mar 2020 14:07:31 +0000
From: Russell King - ARM Linux admin <linux@...linux.org.uk>
To: Jose Abreu <Jose.Abreu@...opsys.com>
Cc: netdev@...r.kernel.org, Joao Pinto <Joao.Pinto@...opsys.com>,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 2/4] net: phy: xpcs: Return error upon RX/TX
fault
On Fri, Mar 13, 2020 at 02:39:41PM +0100, Jose Abreu wrote:
> RX/TX fault status results in link errors. Return error upon these cases
> so that XPCS can be correctly resumed.
Are you sure about this? I'm sure that I read in IEEE 802.3 that
a loss of link results in a receive fault being indicated in
status register 2.
See 49.2.14.1 describing "PCS_status" and the descriptions of MDIO
registers 3.1.2 and 3.8.10. Basically, the link status (3.1.2) is a
latched-low version of PCS_status, and 3.8.10 is an inverted version
of this, independently latched-high.
Returning -EFAULT seems to mean that we'll soft-reset the PHY, and
reconfigure it every time we attempt to read the status whenever the
link is down.
>
> Signed-off-by: Jose Abreu <Jose.Abreu@...opsys.com>
>
> ---
> Cc: Jose Abreu <Jose.Abreu@...opsys.com>
> Cc: Andrew Lunn <andrew@...n.ch>
> Cc: Florian Fainelli <f.fainelli@...il.com>
> Cc: Heiner Kallweit <hkallweit1@...il.com>
> Cc: Russell King <linux@...linux.org.uk>
> Cc: "David S. Miller" <davem@...emloft.net>
> Cc: netdev@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org
> ---
> drivers/net/phy/mdio-xpcs.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/mdio-xpcs.c b/drivers/net/phy/mdio-xpcs.c
> index a4cbeecc6d42..23516397b982 100644
> --- a/drivers/net/phy/mdio-xpcs.c
> +++ b/drivers/net/phy/mdio-xpcs.c
> @@ -190,10 +190,14 @@ static int xpcs_read_fault(struct mdio_xpcs_args *xpcs,
> if (ret < 0)
> return ret;
>
> - if (ret & MDIO_STAT2_RXFAULT)
> + if (ret & MDIO_STAT2_RXFAULT) {
> xpcs_warn(xpcs, state, "Receiver fault detected!\n");
> - if (ret & MDIO_STAT2_TXFAULT)
> + return -EFAULT;
> + }
> + if (ret & MDIO_STAT2_TXFAULT) {
> xpcs_warn(xpcs, state, "Transmitter fault detected!\n");
> + return -EFAULT;
> + }
>
> ret = xpcs_read_vendor(xpcs, MDIO_MMD_PCS, DW_VR_XS_PCS_DIG_STS);
> if (ret < 0)
> --
> 2.7.4
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
Powered by blists - more mailing lists