[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200313161836.GX1922688@smile.fi.intel.com>
Date: Fri, 13 Mar 2020 18:18:36 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Al Cooper <alcooperx@...il.com>
Cc: linux-kernel@...r.kernel.org,
Alan Stern <stern@...land.harvard.edu>,
Arnd Bergmann <arnd@...db.de>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
bcm-kernel-feedback-list@...adcom.com,
"David S. Miller" <davem@...emloft.net>,
devicetree@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Johan Hovold <johan@...nel.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
linux-usb@...r.kernel.org, Mark Rutland <mark.rutland@....com>,
Mathias Nyman <mathias.nyman@...el.com>,
Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
Rob Herring <robh+dt@...nel.org>, Rob Herring <robh@...nel.org>
Subject: Re: [PATCH 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB
SoS's
On Fri, Mar 13, 2020 at 10:15:41AM -0400, Al Cooper wrote:
> This adds support for the XHCI, EHCI and OHCI host controllers found
> in Broadcom STB SoC's. These drivers depend on getting access to the
> new Broadcom STB USB PHY driver through a device-tree phandle and
> will fail if the driver is not available.
Hint to the future:
scripts/get_maintainer.pl --git --git-min-percent=67 ...
>
> Al Cooper (4):
> dt-bindings: Add Broadcom STB USB support
> usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
> usb: ehci: Add new EHCI driver for Broadcom STB SoC's
> usb: host: Add ability to build new Broadcom STB USB drivers
>
> .../bindings/usb/brcm,bcm7445-ehci.yaml | 60 ++++
> .../devicetree/bindings/usb/usb-xhci.txt | 1 +
> MAINTAINERS | 9 +
> drivers/usb/host/Kconfig | 20 ++
> drivers/usb/host/Makefile | 20 +-
> drivers/usb/host/ehci-brcm.c | 288 ++++++++++++++++++
> drivers/usb/host/xhci-brcm.c | 16 +
> drivers/usb/host/xhci-brcm.h | 16 +
> drivers/usb/host/xhci-plat.c | 11 +
> 9 files changed, 435 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
> create mode 100644 drivers/usb/host/ehci-brcm.c
> create mode 100644 drivers/usb/host/xhci-brcm.c
> create mode 100644 drivers/usb/host/xhci-brcm.h
>
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists