[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANAwSgS1+6Dzv2XbmMUR40AbJePxUzWkKkBC1W9hBMGzaMWP3w@mail.gmail.com>
Date: Sun, 15 Mar 2020 15:16:33 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Linux USB Mailing List <linux-usb@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-samsung-soc@...r.kernel.org,
Linux Kernel <linux-kernel@...r.kernel.org>,
"open list:COMMON CLK FRAMEWORK" <linux-clk@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Kukjin Kim <kgene@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Felipe Balbi <balbi@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>
Subject: Re: [PATCHv3 2/5] ARM: dts: exynos: Add missing usbdrd3 suspend clk
Hi Krzysztof,
On Sat, 14 Mar 2020 at 23:50, Krzysztof Kozlowski <krzk@...nel.org> wrote:
>
> On Sat, Mar 14, 2020 at 07:02:33PM +0530, Anand Moon wrote:
> > Hi Krzysztof,
> >
> > On Wed, 11 Mar 2020 at 01:19, Anand Moon <linux.amoon@...il.com> wrote:
> > >
> > > Add new compatible strings for USBDRD3 for adding missing
> > > suspend clk, exynos5422 usbdrd3 support two clk USBD300 and
> > > SCLK_USBD300, so add missing suspemd_clk for Exynos542x DWC3 nodes.
> > >
> > > Signed-off-by: Anand Moon <linux.amoon@...il.com>
> >
> > My assumption based on the FSYS clock source diagram below was bit wrong.
> > [0] https://imgur.com/gallery/zAiBoyh
> >
> > And again re-looking into the driver source code, it turn out their
> > are *6 clock*
> > Here is the correct mapping as per the Exynos5420 clock driver.
> >
> > USB-(phy@...00000)
> > |___________________CLK_SCLK_USBD300
> > |___________________CLK_SCLK_USBPHY300
> >
> > USB-(phy@...00000)
> > |___________________CLK_SCLK_USBD301
> > |___________________CLK_SCLK_USBPHY301
> >
> > USB-(dwc3@...00000)
> > |___________________CLK_USBD300
> > USB-(dwc3@...00000)
> > |___________________CLK_USBD301
> >
> > Note: As per Exynos 5422 user manual, There are some more USB CLK
> > configuration missing in GATE_IP_FSYS. So we could enable another dwc3 clk,
> > If needed I would like too add this missing clk code and enable this
> > clk for dwc3 driver.
> >
> > For some reason we already use CLK_USBD300 and CLK_USBD301
> > for PHY nodes, which lead to this confusion. So we need to update PHY clock
> > CLK_USBD300 with CLK_SCLK_USBD300 and clock CLK_USBD301 with CLK_SCLK_USBD301.
> >
> > Please share your thought on linking PHY nodes above and add new DWC3 clock
> > and enable this clock.
>
> The real clock topology of Exynos5422 is not properly reflected in the
> kernel. However cleaning this up is quite big task.
>
>
> Best regards,
> Krzysztof
>
I would like to fix all my patches with new finding and submit them
once again for review.
-Anand
Powered by blists - more mailing lists