linux-kernel - [PATCH 1/2] dt-bindings: input: Update atmel,maxtouch.txt to YAML

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200315100416.14151-1-paul@crapouillou.net>
Date:   Sun, 15 Mar 2020 11:04:15 +0100
From:   Paul Cercueil <paul@...pouillou.net>
To:     Nick Dyer <nick@...anahar.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 1/2] dt-bindings: input: Update atmel,maxtouch.txt to YAML

Update atmel,maxtouch.txt to YAML. The new 'vdd-supply' property was
added in the process.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
 .../bindings/input/atmel,maxtouch.txt         | 41 -----------
 .../bindings/input/atmel,maxtouch.yaml        | 68 +++++++++++++++++++
 2 files changed, 68 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
 create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
deleted file mode 100644
index c88919480d37..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Atmel maXTouch touchscreen/touchpad
-
-Required properties:
-- compatible:
-    atmel,maxtouch
-
-    The following compatibles have been used in various products but are
-    deprecated:
-	atmel,qt602240_ts
-	atmel,atmel_mxt_ts
-	atmel,atmel_mxt_tp
-	atmel,mXT224
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchpad's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
-    on GPIO bit changes. An array of up to 8 entries can be provided
-    indicating the Linux keycode mapped to each bit of the status byte,
-    starting at the LSB. Linux keycodes are defined in
-    <dt-bindings/input/input.h>.
-
-    Note: the numbering of the GPIOs and the bit they start at varies between
-    maXTouch devices. You must either refer to the documentation, or
-    experiment to determine which bit corresponds to which input. Use
-    KEY_RESERVED for unused padding values.
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio>;
-		interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
new file mode 100644
index 000000000000..1b138a9836bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel maXTouch touchscreen/touchpad DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@...pouillou.net>
+
+properties:
+  compatible:
+    enum:
+      - atmel,maxtouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Phandle to regulator providing power to the touchscreen
+
+  linux,gpio-keymap:
+    minItems: 1
+    maxItems: 8
+    description: >
+      When enabled, the SPT_GPIOPWN_T19 object sends messages
+      on GPIO bit changes. An array of up to 8 entries can be provided
+      indicating the Linux keycode mapped to each bit of the status byte,
+      starting at the LSB. Linux keycodes are defined in
+      <dt-bindings/input/input.h>.
+
+      Note: the numbering of the GPIOs and the bit they start at varies between
+      maXTouch devices. You must either refer to the documentation, or
+      experiment to determine which bit corresponds to which input. Use
+      KEY_RESERVED for unused padding values.
+
+  reset-gpios:
+    description: GPIO specifier for the touchscreen's reset pin (active low)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      mxt224-touchscreen@4a {
+        compatible = "atmel,maxtouch";
+        reg = <0x4a>;
+
+        interrupt-parent = <&gpx0>;
+        interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+        vdd-supply = <&tsp_reg>;
+      };
+    };
-- 
2.25.1