linux-kernel - [PATCH] mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl>
Date:   Sun, 15 Mar 2020 17:44:25 +0100
From:   Michał Mirosław <mirq-linux@...e.qmqm.pl>
To:     Ludovic Desroches <ludovic.desroches@...rochip.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@...r.kernel.org
Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
---
 drivers/mmc/host/sdhci-of-at91.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index d90f4ed18283..8f8da2fe48a9 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -185,7 +185,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
 
 	sdhci_reset(host, mask);
 
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	if (priv->cal_always_on && (mask & SDHCI_RESET_ALL))
@@ -487,8 +488,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 	 * detection procedure using the SDMCC_CD signal is bypassed.
 	 * This bit is reset when a software reset for all command is performed
 	 * so we need to implement our own reset function to set back this bit.
+	 *
+	 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
 	 */
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	pm_runtime_put_autosuspend(&pdev->dev);
-- 
2.20.1