linux-kernel - Re: [PATCH net 3/3] arm64: dts: ls1046ardb: set RGMII interfaces to RGMII

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200314211924.GC8622@lunn.ch>
Date:   Sat, 14 Mar 2020 22:19:24 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Madalin Bucur <madalin.bucur@....nxp.com>
Cc:     davem@...emloft.net, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, shawnguo@...nel.org,
        leoyang.li@....com, robh+dt@...nel.org, mark.rutland@....com,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH net 3/3] arm64: dts: ls1046ardb: set RGMII interfaces to
 RGMII_ID mode

On Fri, Mar 13, 2020 at 02:04:25PM +0200, Madalin Bucur wrote:
> The correct setting for the RGMII ports on LS1046ARDB is to
> enable delay on both Rx and Tx so the interface mode used must
> be PHY_INTERFACE_MODE_RGMII_ID.
> 
> Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
> configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
> has control over the RGMII RX delay and it is disabling it for
> RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
> in the device tree the mode was described as "rgmii".
> 
> Changing the phy-connection-type to "rgmii-id" to address the issue.
> 
> Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
> Signed-off-by: Madalin Bucur <madalin.bucur@....nxp.com>

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew