| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <202003161404.934CCE0@keescook>
Date: Mon, 16 Mar 2020 14:05:56 -0700
From: Kees Cook <keescook@...omium.org>
To: Michael Ellerman <mpe@...erman.id.au>
Cc: Shuah Khan <skhan@...uxfoundation.org>, shuah@...nel.org,
luto@...capital.net, wad@...omium.org, daniel@...earbox.net,
kafai@...com, yhs@...com, andriin@...com,
gregkh@...uxfoundation.org, tglx@...utronix.de,
khilman@...libre.com, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
bpf@...r.kernel.org
Subject: Re: [PATCH v3] selftests: Fix seccomp to support relocatable build
(O=objdir)
On Mon, Mar 16, 2020 at 11:12:57PM +1100, Michael Ellerman wrote:
> Shuah Khan <skhan@...uxfoundation.org> writes:
> > Fix seccomp relocatable builds. This is a simple fix to use the right
> > lib.mk variable TEST_GEN_PROGS with dependency on kselftest_harness.h
> > header, and defining LDFLAGS for pthread lib.
> >
> > Removes custom clean rule which is no longer necessary with the use of
> > TEST_GEN_PROGS.
> >
> > Uses $(OUTPUT) defined in lib.mk to handle build relocation.
> >
> > The following use-cases work with this change:
> >
> > In seccomp directory:
> > make all and make clean
> >
> > From top level from main Makefile:
> > make kselftest-install O=objdir ARCH=arm64 HOSTCC=gcc \
> > CROSS_COMPILE=aarch64-linux-gnu- TARGETS=seccomp
> >
> > Signed-off-by: Shuah Khan <skhan@...uxfoundation.org>
> > ---
> >
> > Changes since v2:
> > -- Using TEST_GEN_PROGS is sufficient to generate objects.
> > Addresses review comments from Kees Cook.
> >
> > tools/testing/selftests/seccomp/Makefile | 18 ++++++++----------
> > 1 file changed, 8 insertions(+), 10 deletions(-)
> >
> > diff --git a/tools/testing/selftests/seccomp/Makefile b/tools/testing/selftests/seccomp/Makefile
> > index 1760b3e39730..a0388fd2c3f2 100644
> > --- a/tools/testing/selftests/seccomp/Makefile
> > +++ b/tools/testing/selftests/seccomp/Makefile
> > @@ -1,17 +1,15 @@
> > # SPDX-License-Identifier: GPL-2.0
> > -all:
> > -
> > -include ../lib.mk
> > +CFLAGS += -Wl,-no-as-needed -Wall
> > +LDFLAGS += -lpthread
> >
> > .PHONY: all clean
> >
> > -BINARIES := seccomp_bpf seccomp_benchmark
> > -CFLAGS += -Wl,-no-as-needed -Wall
> > +include ../lib.mk
> > +
> > +# OUTPUT set by lib.mk
> > +TEST_GEN_PROGS := $(OUTPUT)/seccomp_bpf $(OUTPUT)/seccomp_benchmark
> >
> > -seccomp_bpf: seccomp_bpf.c ../kselftest_harness.h
> > - $(CC) $(CFLAGS) $(LDFLAGS) $< -lpthread -o $@
> > +$(TEST_GEN_PROGS): ../kselftest_harness.h
> >
> > -TEST_PROGS += $(BINARIES)
> > -EXTRA_CLEAN := $(BINARIES)
> > +all: $(TEST_GEN_PROGS)
> >
> > -all: $(BINARIES)
>
>
> It shouldn't be that complicated. We just need to define TEST_GEN_PROGS
> before including lib.mk, and then add the dependency on the harness
> after we include lib.mk (so that TEST_GEN_PROGS has been updated to
> prefix $(OUTPUT)).
>
> eg:
>
> # SPDX-License-Identifier: GPL-2.0
> CFLAGS += -Wl,-no-as-needed -Wall
> LDFLAGS += -lpthread
>
> TEST_GEN_PROGS := seccomp_bpf seccomp_benchmark
>
> include ../lib.mk
>
> $(TEST_GEN_PROGS): ../kselftest_harness.h
Exactly. This (with an extra comment) is precisely what I suggested during
v2 review:
https://lore.kernel.org/lkml/202003041815.B8C73DEC@keescook/
-Kees
>
>
> Normal in-tree build:
>
> selftests$ make TARGETS=seccomp
> make[1]: Entering directory '/home/michael/linux/tools/testing/selftests/seccomp'
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/seccomp/seccomp_bpf
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_benchmark.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/seccomp/seccomp_benchmark
> make[1]: Leaving directory '/home/michael/linux/tools/testing/selftests/seccomp'
>
> selftests$ ls -l seccomp/
> total 388
> -rw-rw-r-- 1 michael michael 41 Jan 9 12:00 config
> -rw-rw-r-- 1 michael michael 201 Mar 16 23:04 Makefile
> -rwxrwxr-x 1 michael michael 70824 Mar 16 23:07 seccomp_benchmark*
> -rw-rw-r-- 1 michael michael 2289 Feb 17 21:39 seccomp_benchmark.c
> -rwxrwxr-x 1 michael michael 290520 Mar 16 23:07 seccomp_bpf*
> -rw-rw-r-- 1 michael michael 94778 Mar 5 23:33 seccomp_bpf.c
>
>
> O= build:
>
> selftests$ make TARGETS=seccomp O=$PWD/build
> make[1]: Entering directory '/home/michael/linux/tools/testing/selftests/seccomp'
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/build/seccomp/seccomp_bpf
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_benchmark.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/build/seccomp/seccomp_benchmark
> make[1]: Leaving directory '/home/michael/linux/tools/testing/selftests/seccomp'
>
> selftests$ ls -l build/seccomp/
> total 280
> -rwxrwxr-x 1 michael michael 70824 Mar 16 23:05 seccomp_benchmark*
> -rwxrwxr-x 1 michael michael 290520 Mar 16 23:05 seccomp_bpf*
>
>
> Build in the directory itself:
> selftests$ cd seccomp
> seccomp$ make
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/seccomp/seccomp_bpf
> gcc -Wl,-no-as-needed -Wall -lpthread seccomp_benchmark.c ../kselftest_harness.h -o /home/michael/linux/tools/testing/selftests/seccomp/seccomp_benchmark
>
> seccomp$ ls -l
> total 388
> -rw-rw-r-- 1 michael michael 41 Jan 9 12:00 config
> -rw-rw-r-- 1 michael michael 201 Mar 16 23:04 Makefile
> -rwxrwxr-x 1 michael michael 70824 Mar 16 23:06 seccomp_benchmark*
> -rw-rw-r-- 1 michael michael 2289 Feb 17 21:39 seccomp_benchmark.c
> -rwxrwxr-x 1 michael michael 290520 Mar 16 23:06 seccomp_bpf*
> -rw-rw-r-- 1 michael michael 94778 Mar 5 23:33 seccomp_bpf.c
>
>
> cheers
--
Kees Cook
Powered by blists - more mailing lists