[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200316072316.7156-1-roger.lu@mediatek.com>
Date: Mon, 16 Mar 2020 15:23:14 +0800
From: Roger Lu <roger.lu@...iatek.com>
To: Kevin Hilman <khilman@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Nicolas Boichat <drinkcat@...gle.com>,
Stephen Boyd <sboyd@...nel.org>
CC: Fan Chen <fan.chen@...iatek.com>,
HenryC Chen <HenryC.Chen@...iatek.com>,
YT Lee <yt.lee@...iatek.com>,
Xiaoqing Liu <Xiaoqing.Liu@...iatek.com>,
Charles Yang <Charles.Yang@...iatek.com>,
Angus Lin <Angus.Lin@...iatek.com>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Nishanth Menon <nm@...com>, Roger Lu <roger.lu@...iatek.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>
Subject: [PATCH v7 0/3] PM / AVS: SVS: Introduce SVS engine
1. SVS driver use OPP adjust event in [1] to update OPP table voltage part.
2. SVS dts node refers to CPU opp table [2] and GPU opp table [3].
3. SVS and thermal dts use the same thermal efuse [4].
4. SVS dts needs PMIC regulator [5].
[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/patch/11304935/
[3] https://patchwork.kernel.org/patch/11423009/
[4] https://patchwork.kernel.org/patch/11316495/
[5] https://patchwork.kernel.org/patch/11284617/
pending discussion on v7:
- SVS sub-node architecture pending discussion in below patch.
https://lore.kernel.org/patchwork/patch/1175994/
changes since v6:
- svs_isr_handler() function is merged into svs_isr().
- In svs_isr(), we find which bank fires interrupt first and check this bank
is suspended or not secondly.
- Use memdup_user_nul() instead of copy_from_user().
- Use U32_MAX instead of "(u32)-1.
- SVS needs to do resume after thermal resume in system suspend flow.
Therefore, change SVS pm_ops to prepare/complete.
- Add high temperature voltages compensation codes.
- Add irqflags in "struct svs_platform" for supporting different SVS HW setting.
- Set signed-off voltages to system when system suspend.
- Add SVS HW reset flag for future SVS HW support.
- Coding style refinement.
Roger Lu (3):
dt-bindings: soc: add mtk svs dt-bindings
arm64: dts: mt8183: add svs device information
PM / AVS: SVS: Introduce SVS engine
.../devicetree/bindings/power/mtk-svs.txt | 76 +
arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 16 +
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 41 +
drivers/power/avs/Kconfig | 10 +
drivers/power/avs/Makefile | 1 +
drivers/power/avs/mtk_svs.c | 2074 +++++++++++++++++
include/linux/power/mtk_svs.h | 23 +
7 files changed, 2241 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt
create mode 100644 drivers/power/avs/mtk_svs.c
create mode 100644 include/linux/power/mtk_svs.h
Powered by blists - more mailing lists