linux-kernel - Re: [PATCH] dmaengine: ti: k3-udma: Fix an error handling path in 'k3_udma_glue_cfg_rx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <5d714664-d8c3-a710-8e14-65492b4cd99e@ti.com>
Date:   Wed, 18 Mar 2020 09:03:50 +0200
From:   Peter Ujfalusi <peter.ujfalusi@...com>
To:     Christophe JAILLET <christophe.jaillet@...adoo.fr>,
        <vkoul@...nel.org>, <dan.j.williams@...el.com>,
        <grygorii.strashko@...com>
CC:     <dmaengine@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <kernel-janitors@...r.kernel.org>
Subject: Re: [PATCH] dmaengine: ti: k3-udma: Fix an error handling path in
 'k3_udma_glue_cfg_rx_flow()'

Hi Christophe,

On 15/03/2020 17.50, Christophe JAILLET wrote:
> All but one error handling paths in the 'k3_udma_glue_cfg_rx_flow()'
> function 'goto err' and call 'k3_udma_glue_release_rx_flow()'.
> 
> This not correct because this function has a 'channel->flows_ready--;' at
> the end, but 'flows_ready' has not been incremented here, when we branch to
> the error handling path.
> 
> In order to keep a correct value in 'flows_ready', un-roll
> 'k3_udma_glue_release_rx_flow()', simplify it, add some labels and branch
> at the correct places when an error is detected.
> 
> Doing so, we also NULLify 'flow->udma_rflow' in a path that was lacking it.
> 
> Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine user")
> Signed-off-by: Christophe JAILLET <christophe.jaillet@...adoo.fr>

Can you change the subject to:
dmaengine: ti: k3-udma-glue: ...

> ---
> Not sure that the last point of the description is correct. Maybe, the
> 'xudma_rflow_put / return -ENODEV;' should be kept in order not to
> override 'flow->udma_rflow'.
> ---
>  drivers/dma/ti/k3-udma-glue.c | 30 ++++++++++++++++++++----------
>  1 file changed, 20 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
> index dbccdc7c0ed5..890573eb1625 100644
> --- a/drivers/dma/ti/k3-udma-glue.c
> +++ b/drivers/dma/ti/k3-udma-glue.c
> @@ -578,12 +578,12 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
>  	if (IS_ERR(flow->udma_rflow)) {
>  		ret = PTR_ERR(flow->udma_rflow);
>  		dev_err(dev, "UDMAX rflow get err %d\n", ret);
> -		goto err;
> +		goto err_return;

return ret;

>  	}
>  
>  	if (flow->udma_rflow_id != xudma_rflow_get_id(flow->udma_rflow)) {
> -		xudma_rflow_put(rx_chn->common.udmax, flow->udma_rflow);
> -		return -ENODEV;
> +		ret = -ENODEV;
> +		goto err_rflow_put;
>  	}
>  
>  	/* request and cfg rings */
> @@ -592,7 +592,7 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
>  	if (!flow->ringrx) {
>  		ret = -ENODEV;
>  		dev_err(dev, "Failed to get RX ring\n");
> -		goto err;
> +		goto err_rflow_put;
>  	}
>  
>  	flow->ringrxfdq = k3_ringacc_request_ring(rx_chn->common.ringacc,
> @@ -600,19 +600,19 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
>  	if (!flow->ringrxfdq) {
>  		ret = -ENODEV;
>  		dev_err(dev, "Failed to get RXFDQ ring\n");
> -		goto err;
> +		goto err_ringrx_free;
>  	}
>  
>  	ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg);
>  	if (ret) {
>  		dev_err(dev, "Failed to cfg ringrx %d\n", ret);
> -		goto err;
> +		goto err_ringrxfdq_free;
>  	}
>  
>  	ret = k3_ringacc_ring_cfg(flow->ringrxfdq, &flow_cfg->rxfdq_cfg);
>  	if (ret) {
>  		dev_err(dev, "Failed to cfg ringrxfdq %d\n", ret);
> -		goto err;
> +		goto err_ringrxfdq_free;
>  	}
>  
>  	if (rx_chn->remote) {
> @@ -662,7 +662,7 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
>  	if (ret) {
>  		dev_err(dev, "flow%d config failed: %d\n", flow->udma_rflow_id,
>  			ret);
> -		goto err;
> +		goto err_ringrxfdq_free;
>  	}
>  
>  	rx_chn->flows_ready++;
> @@ -670,8 +670,18 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn,
>  		flow->udma_rflow_id, rx_chn->flows_ready);
>  
>  	return 0;
> -err:
> -	k3_udma_glue_release_rx_flow(rx_chn, flow_idx);
> +
> +err_ringrxfdq_free:
> +	k3_ringacc_ring_free(flow->ringrxfdq);
> +
> +err_ringrx_free:
> +	k3_ringacc_ring_free(flow->ringrx);
> +
> +err_rflow_put:
> +	xudma_rflow_put(rx_chn->common.udmax, flow->udma_rflow);
> +	flow->udma_rflow = NULL;
> +
> +err_return:

and you don't need this label.

>  	return ret;
>  }
>  
> 

With these changes:
Acked-by: Peter Ujfalusi <peter.ujfalusi@...com>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki