| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200318070730.4012371-2-enric.balletbo@collabora.com>
Date: Wed, 18 Mar 2020 08:07:28 +0100
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: linux-kernel@...r.kernel.org
Cc: Collabora Kernel ML <kernel@...labora.com>,
Andrzej Hajda <a.hajda@...sung.com>, icenowy@...c.io,
anarsoul@...il.com, Neil Armstrong <narmstrong@...libre.com>,
matthias.bgg@...il.com, drinkcat@...omium.org, hsinyi@...omium.org,
megous@...ous.com, Lee Jones <lee.jones@...aro.org>
Subject: [PATCH v4 2/4] mfd: anx7688: Add driver for Analogix ANX7688 chip
The ANX7688 chip is a Type-C Port Controller, HDMI to DP converter and
USB-C mux between USB 3.0 lanes and the DP output.
For our use case a big part of the chip, like power supplies, control
gpios and usb-c parts are managed by an Embedded Controller, hence,
this is its simplest form of it. Other users of this chip might
introduce new functionalities as per their requirements.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/mfd/Kconfig | 11 +++++
drivers/mfd/Makefile | 1 +
drivers/mfd/anx7688.c | 87 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/anx7688.h | 39 +++++++++++++++++
4 files changed, 138 insertions(+)
create mode 100644 drivers/mfd/anx7688.c
create mode 100644 include/linux/mfd/anx7688.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2b203290e7b9..ac4ef4f20518 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -51,6 +51,17 @@ config MFD_ACT8945A
linear regulators, along with a complete ActivePath battery
charger.
+config MFD_ANX7688
+ tristate "Analogix ANX7688"
+ select MFD_CORE
+ select REGMAP_I2C
+ depends on I2C && OF
+ help
+ Support the ANX7688 from Analogix. This device features a USB
+ Type-C Port Controller (TCPC), and HDMI to DP converter, and
+ USB-C mux between USB 3.0 lanes and the DP output of the
+ embedded converter.
+
config MFD_SUN4I_GPADC
tristate "Allwinner sunxi platforms' GPADC MFD driver"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b83f172545e1..4c6ca8a7d260 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_ACT8945A) += act8945a.o
obj-$(CONFIG_MFD_SM501) += sm501.o
+obj-$(CONFIG_MFD_ANX7688) += anx7688.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
obj-$(CONFIG_ARCH_BCM2835) += bcm2835-pm.o
obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o
diff --git a/drivers/mfd/anx7688.c b/drivers/mfd/anx7688.c
new file mode 100644
index 000000000000..fab7ed410c46
--- /dev/null
+++ b/drivers/mfd/anx7688.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HDMI to USB Type-C Bridge and Port Controller with MUX
+ *
+ * Copyright 2020 Google LLC
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/anx7688.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+
+static const struct regmap_config anx7688_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int anx7688_i2c_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct anx7688 *anx7688;
+ u16 vendor, device;
+ u8 buffer[4];
+ int ret;
+
+ anx7688 = devm_kzalloc(dev, sizeof(*anx7688), GFP_KERNEL);
+ if (!anx7688)
+ return -ENOMEM;
+
+ anx7688->client = client;
+ i2c_set_clientdata(client, anx7688);
+
+ anx7688->regmap = devm_regmap_init_i2c(client, &anx7688_regmap_config);
+
+ /* Read both vendor and device id (4 bytes). */
+ ret = regmap_bulk_read(anx7688->regmap, ANX7688_VENDOR_ID_REG,
+ buffer, 4);
+ if (ret) {
+ dev_err(dev, "Failed to read chip vendor/device id\n");
+ return ret;
+ }
+
+ vendor = (u16)buffer[1] << 8 | buffer[0];
+ device = (u16)buffer[3] << 8 | buffer[2];
+ if (vendor != ANX7688_VENDOR_ID || device != ANX7688_DEVICE_ID) {
+ dev_err(dev, "Invalid vendor/device id %04x/%04x\n",
+ vendor, device);
+ return -ENODEV;
+ }
+
+ ret = regmap_bulk_read(anx7688->regmap, ANX7688_FW_VERSION_REG,
+ buffer, 2);
+ if (ret) {
+ dev_err(&client->dev, "Failed to read firmware version\n");
+ return ret;
+ }
+
+ anx7688->fw_version = (u16)buffer[0] << 8 | buffer[1];
+ dev_info(dev, "ANX7688 firwmare version 0x%04x\n",
+ anx7688->fw_version);
+
+ return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id anx7688_match_table[] = {
+ { .compatible = "analogix,anx7688", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, anx7688_match_table);
+
+static struct i2c_driver anx7688_driver = {
+ .probe_new = anx7688_i2c_probe,
+ .driver = {
+ .name = "anx7688",
+ .of_match_table = anx7688_match_table,
+ },
+};
+
+module_i2c_driver(anx7688_driver);
+
+MODULE_DESCRIPTION("HDMI to USB Type-C Bridge and Port Controller with MUX driver");
+MODULE_AUTHOR("Nicolas Boichat <drinkcat@...omium.org>");
+MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@...labora.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/anx7688.h b/include/linux/mfd/anx7688.h
new file mode 100644
index 000000000000..f2760856f045
--- /dev/null
+++ b/include/linux/mfd/anx7688.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * HDMI to USB Type-C Bridge and Port Controller with MUX
+ *
+ * Copyright 2020 Google LLC
+ */
+#ifndef __LINUX_MFD_ANX7688_H
+#define __LINUX_MFD_ANX7688_H
+
+#include <linux/types.h>
+
+/* Register addresses */
+#define ANX7688_VENDOR_ID_REG 0x00
+#define ANX7688_DEVICE_ID_REG 0x02
+
+#define ANX7688_FW_VERSION_REG 0x80
+
+#define ANX7688_DP_BANDWIDTH_REG 0x85
+#define ANX7688_DP_LANE_COUNT_REG 0x86
+
+#define ANX7688_VENDOR_ID 0x1f29
+#define ANX7688_DEVICE_ID 0x7688
+
+/* First supported firmware version (0.85) */
+#define ANX7688_MINIMUM_FW_VERSION 0x0085
+
+struct gpio_desc;
+struct i2c_client;
+struct regulator;
+struct regmap;
+
+struct anx7688 {
+ struct i2c_client *client;
+ struct regmap *regmap;
+
+ u16 fw_version;
+};
+
+#endif /* __LINUX_MFD_ANX7688_H */
--
2.25.1
Powered by blists - more mailing lists