[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <4171EF13-7956-44DA-A5BF-0245E4926436@linaro.org>
Date: Wed, 18 Mar 2020 09:45:22 +0100
From: Paolo Valente <paolo.valente@...aro.org>
To: Zhiqiang Liu <liuzhiqiang26@...wei.com>
Cc: Jens Axboe <axboe@...nel.dk>,
linux-block <linux-block@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Mingfangsen <mingfangsen@...wei.com>,
Yanxiaodan <yanxiaodan@...wei.com>,
"wubo (T)" <wubo40@...wei.com>, renxudong <renxudong1@...wei.com>,
Louhongxiang <louhongxiang@...wei.com>
Subject: Re: [PATCH] block, bfq: fix use-after-free in
bfq_idle_slice_timer_body
> Il giorno 18 mar 2020, alle ore 02:35, Zhiqiang Liu <liuzhiqiang26@...wei.com> ha scritto:
>
>
>
> On 2020/3/18 1:44, Paolo Valente wrote:
>>
>>
>>> Il giorno 17 mar 2020, alle ore 15:06, Zhiqiang Liu <liuzhiqiang26@...wei.com> ha scritto:
>>>
>>> In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
>>> not in bfqd-lock critical section. The bfqq, which is not
>>> equal to NULL in bfq_idle_slice_timer, may be freed after passing
>>> to bfq_idle_slice_timer_body. So we will access the freed memory.
>>>
>>> KASAN log is given as follows:
>>> [13058.354613] ==================================================================
>>> [13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
>>> [13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
>>> [13058.354646]
>>> [13058.354655] CPU: 96 PID: 19767 Comm: fork13
>>> [13058.354661] Call trace:
>>> [13058.354667] dump_backtrace+0x0/0x310
>>> [13058.354672] show_stack+0x28/0x38
>>> [13058.354681] dump_stack+0xd8/0x108
>>> [13058.354687] print_address_description+0x68/0x2d0
>>> [13058.354690] kasan_report+0x124/0x2e0
>>> [13058.354697] __asan_load8+0x88/0xb0
>>> [13058.354702] bfq_idle_slice_timer+0xac/0x290
>>> [13058.354707] __hrtimer_run_queues+0x298/0x8b8
>>> [13058.354710] hrtimer_interrupt+0x1b8/0x678
>>> [13058.354716] arch_timer_handler_phys+0x4c/0x78
>>> [13058.354722] handle_percpu_devid_irq+0xf0/0x558
>>> [13058.354731] generic_handle_irq+0x50/0x70
>>> [13058.354735] __handle_domain_irq+0x94/0x110
>>> [13058.354739] gic_handle_irq+0x8c/0x1b0
>>> [13058.354742] el1_irq+0xb8/0x140
>>> [13058.354748] do_wp_page+0x260/0xe28
>>> [13058.354752] __handle_mm_fault+0x8ec/0x9b0
>>> [13058.354756] handle_mm_fault+0x280/0x460
>>> [13058.354762] do_page_fault+0x3ec/0x890
>>> [13058.354765] do_mem_abort+0xc0/0x1b0
>>> [13058.354768] el0_da+0x24/0x28
>>> [13058.354770]
>>> [13058.354773] Allocated by task 19731:
>>> [13058.354780] kasan_kmalloc+0xe0/0x190
>>> [13058.354784] kasan_slab_alloc+0x14/0x20
>>> [13058.354788] kmem_cache_alloc_node+0x130/0x440
>>> [13058.354793] bfq_get_queue+0x138/0x858
>>> [13058.354797] bfq_get_bfqq_handle_split+0xd4/0x328
>>> [13058.354801] bfq_init_rq+0x1f4/0x1180
>>> [13058.354806] bfq_insert_requests+0x264/0x1c98
>>> [13058.354811] blk_mq_sched_insert_requests+0x1c4/0x488
>>> [13058.354818] blk_mq_flush_plug_list+0x2d4/0x6e0
>>> [13058.354826] blk_flush_plug_list+0x230/0x548
>>> [13058.354830] blk_finish_plug+0x60/0x80
>>> [13058.354838] read_pages+0xec/0x2c0
>>> [13058.354842] __do_page_cache_readahead+0x374/0x438
>>> [13058.354846] ondemand_readahead+0x24c/0x6b0
>>> [13058.354851] page_cache_sync_readahead+0x17c/0x2f8
>>> [13058.354858] generic_file_buffered_read+0x588/0xc58
>>> [13058.354862] generic_file_read_iter+0x1b4/0x278
>>> [13058.354965] ext4_file_read_iter+0xa8/0x1d8 [ext4]
>>> [13058.354972] __vfs_read+0x238/0x320
>>> [13058.354976] vfs_read+0xbc/0x1c0
>>> [13058.354980] ksys_read+0xdc/0x1b8
>>> [13058.354984] __arm64_sys_read+0x50/0x60
>>> [13058.354990] el0_svc_common+0xb4/0x1d8
>>> [13058.354994] el0_svc_handler+0x50/0xa8
>>> [13058.354998] el0_svc+0x8/0xc
>>> [13058.354999]
>>> [13058.355001] Freed by task 19731:
>>> [13058.355007] __kasan_slab_free+0x120/0x228
>>> [13058.355010] kasan_slab_free+0x10/0x18
>>> [13058.355014] kmem_cache_free+0x288/0x3f0
>>> [13058.355018] bfq_put_queue+0x134/0x208
>>> [13058.355022] bfq_exit_icq_bfqq+0x164/0x348
>>> [13058.355026] bfq_exit_icq+0x28/0x40
>>> [13058.355030] ioc_exit_icq+0xa0/0x150
>>> [13058.355035] put_io_context_active+0x250/0x438
>>> [13058.355038] exit_io_context+0xd0/0x138
>>> [13058.355045] do_exit+0x734/0xc58
>>> [13058.355050] do_group_exit+0x78/0x220
>>> [13058.355054] __wake_up_parent+0x0/0x50
>>> [13058.355058] el0_svc_common+0xb4/0x1d8
>>> [13058.355062] el0_svc_handler+0x50/0xa8
>>> [13058.355066] el0_svc+0x8/0xc
>>> [13058.355067]
>>> [13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
>>> [13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
>>> [13058.355077] The buggy address belongs to the page:
>>> [13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
>>> [13058.366175] flags: 0x2ffffe0000008100(slab|head)
>>> [13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
>>> [13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
>>> [13058.370789] page dumped because: kasan: bad access detected
>>> [13058.370791]
>>> [13058.370792] Memory state around the buggy address:
>>> [13058.370797] ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
>>> [13058.370801] ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>> [13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>> [13058.370808] ^
>>> [13058.370811] ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>> [13058.370815] ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>>> [13058.370817] ==================================================================
>>> [13058.370820] Disabling lock debugging due to kernel taint
>>>
>>> Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
>>>
>>> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@...wei.com>
>>> Signed-off-by: Feilong Lin <linfeilong@...wei.com>
>>> ---
>>> block/bfq-iosched.c | 10 +++++-----
>>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
>>> index 8c436abfaf14..f470b9daa98b 100644
>>> --- a/block/bfq-iosched.c
>>> +++ b/block/bfq-iosched.c
>>> @@ -6215,20 +6215,20 @@ static struct bfq_queue *bfq_init_rq(struct request *rq)
>>> return bfqq;
>>> }
>>>
>>> -static void bfq_idle_slice_timer_body(struct bfq_queue *bfqq)
>>> +static void
>>> +bfq_idle_slice_timer_body(struct bfq_data *bfqd, struct bfq_queue *bfqq)
>>> {
>>> - struct bfq_data *bfqd = bfqq->bfqd;
>>> enum bfqq_expiration reason;
>>> unsigned long flags;
>>>
>>> spin_lock_irqsave(&bfqd->lock, flags);
>>> - bfq_clear_bfqq_wait_request(bfqq);
>>> -
>>> if (bfqq != bfqd->in_service_queue) {
>>> spin_unlock_irqrestore(&bfqd->lock, flags);
>>> return;
>>> }
>>>
>>> + bfq_clear_bfqq_wait_request(bfqq);
>>> +
>>
>> Please add a comment on why you (correctly) clear this flag only if bfqq is in service.
>>
>> For the rest, seems ok to me.
>>
>> Thank you very much for spotting and fixing this bug,
>> Paolo
>>
> Thanks for your reply.
> Considering that the bfqq may be in race, we should firstly check whether bfqq is in service before
> doing something on it.
>
The comment you propose is correct, but the correctness issue I raised
is essentially the opposite. Sorry for not being clear.
Let me put it the other way round: why is it still correct that, if
bfqq is not the queue in service, then that flag is not cleared at all?
IOW, why is it not a problem that that flag remains untouched is bfqq
is not in service?
Thanks,
Paolo
> I will add a comment before 'if (bfqq != bfqd->in_service_queue) {'
>
> In addition, the fix tag is missing. I will add it in v2 patch.
>
>>> if (bfq_bfqq_budget_timeout(bfqq))
>>> /*
>>> * Also here the queue can be safely expired
>>> @@ -6273,7 +6273,7 @@ static enum hrtimer_restart bfq_idle_slice_timer(struct hrtimer *timer)
>>> * early.
>>> */
>>> if (bfqq)
>>> - bfq_idle_slice_timer_body(bfqq);
>>> + bfq_idle_slice_timer_body(bfqd, bfqq);
>>>
>>> return HRTIMER_NORESTART;
>>> }
>>> --
>>> 2.19.1
>>>
>>>
>>
>>
>> .
Powered by blists - more mailing lists