[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGgjyvG=eqTUP0c3rnRq7vm7wZk-95oEtVEhV9GCBohC6sBcRg@mail.gmail.com>
Date: Wed, 18 Mar 2020 14:36:10 +0200
From: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: devicetree@...r.kernel.org, linux-pwm@...r.kernel.org,
Paul Barker <pbarker@...sulko.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Igor Opaniuk <igor.opaniuk@...adex.com>,
Philippe Schenker <philippe.schenker@...adex.com>,
Rob Herring <robh+dt@...nel.org>, linux-kernel@...r.kernel.org
Subject: Re: [RFC PATCH 4/7] dt-bindings: pwm: add description of PWM polarity
On Wed, Mar 18, 2020 at 2:30 PM Laurent Pinchart
<laurent.pinchart@...asonboard.com> wrote:
>
> Hi Oleksandr,
>
> On Wed, Mar 18, 2020 at 01:37:00PM +0200, Oleksandr Suvorov wrote:
> > On Wed, Mar 18, 2020 at 1:02 AM Laurent Pinchart wrote:
> > > On Tue, Mar 17, 2020 at 02:32:28PM +0200, Oleksandr Suvorov wrote:
> > > > Move the description of the PWM signal polarity from
> > > > <linux/pwm.h>, prepare for removing the polarity
> > > > definition from <linux/pwm.h>.
> > > >
> > > > Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@...adex.com>
> > > > ---
> > > >
> > > > include/dt-bindings/pwm/pwm.h | 9 +++++++++
> > > > 1 file changed, 9 insertions(+)
> > > >
> > > > diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
> > > > index 6b58caa6385e..c07da2088a61 100644
> > > > --- a/include/dt-bindings/pwm/pwm.h
> > > > +++ b/include/dt-bindings/pwm/pwm.h
> > > > @@ -10,7 +10,16 @@
> > > > #ifndef _DT_BINDINGS_PWM_PWM_H
> > > > #define _DT_BINDINGS_PWM_PWM_H
> > > >
> > > > +/**
> > > > + * a high signal for the duration of the duty-cycle, followed by a low signal
> > > > + * for the remainder of the pulse period.
> > > > + */
> > >
> > > Last time I checked, kernedoc didn't support documenting macros (enums
> > > are supported).
> >
> > That's why I dropped the kerneldoc tags leaving the descriptions only.
>
> But you forgot to replace /** with /* :-) Sorry for not being clear
> about what I meant.
Ah, yes, thanks! I'll fix it in the next version :)
>
> > > > #define PWM_POLARITY_NORMAL 0
> > > > +
> > > > +/**
> > > > + * a low signal for the duration of the duty-cycle, followed by a high signal
> > > > + * for the remainder of the pulse period.
> > > > + */
> > > > #define PWM_POLARITY_INVERTED (1 << 0)
> > > >
> > > > #endif
>
> --
> Regards,
>
> Laurent Pinchart
--
Best regards
Oleksandr Suvorov
Toradex AG
Ebenaustrasse 10 | 6048 Horw | Switzerland | T: +41 41 500 48 00
Powered by blists - more mailing lists